===========================================================================
Universal RAID Utility Ver4.1 (Windows Edition)
===========================================================================
[Software name ] Universal RAID Utility Ver4.1
[Registered name ] 006740-G05_636560353596122505.zip
uru41eug_compH.zip
[Copyright (C) ] NEC Corporation 2007-2018
[Applicable model] Express5800/52Xa
Express5800/Y53Xi
Express5800/53Xi
Express5800/R120d-1M
Express5800/R120d-2M
Express5800/R120d-1E
Express5800/R120d-2E
Express5800/R120e-1M
Express5800/R120e-2M
Express5800/R120e-1E
Express5800/R120e-2E
Express5800/T120d
Express5800/T120e
Express5800/GT110e
Express5800/GT110e-S
Express5800/R110e-1E
Express5800/T110f-E
Express5800/T110f-S
Express5800/R110f-1E
Express5800/E120d-1
Express5800/E120d-M
Express5800/E120e-M
Express5800/B110d
Express5800/B120d
Express5800/B120d-h
Express5800/B120e
Express5800/B120e-h
Express5800/B120f
Express5800/B120f-h
Express5800/R120f-1M
Express5800/R120f-2M
Express5800/T120f
Express5800/R120f-1E
Express5800/R120f-2E
Express5800/T110g-S
Express5800/T110g-E
Express5800/R110g-1E
Express5800/E120f-M
Express5800/T110h-S
Express5800/T110h
Express5800/R110h-1
Express5800/R120g-2E
Express5800/T120g
Express5800/E120g-M
Express5800/R120g-1M
Express5800/R120g-2M
Express5800/R120g-1E
Express5800/B120g-h
Express5800/A1040d
Express5800/A2010d
Express5800/A2020d
Express5800/A2040d
[Users ] For users who will install following Windows on NEC Express5800
series.
- Windows Server 2016
- Windows Server 2012 R2
- Windows Server 2012
- Windows Server 2008 R2
- Windows Server 2008
- Windows Server 2003 R2 SP2 or later
- Windows 10
- Windows 8.1
- Windows 8
- Windows 7
- Windows XP Professional SP3 or later
- Windows Small Business Server 2011
[Software type ] Utility
[Creation method ] Windows Zip format
===========================================================================
[Software Introduction]
Universal RAID Utility (hereinafter called "this software") is RAID System
Management Utility for the following RAID Controllers.
Universal RAID Utility Ver4.1 Rev 3037 newly supports Express5800/R120g-2E,
T120g, E120g-M, R120g-1M, R120g-2M, R120g-1E, B120g-h applicable model.
See the Revision History on this page for other updates.
<RAID Controllers>
- Onboard RAID Controller on NEC Express5800/52Xa, Y53Xi, 53Xi, R120d-1E,
R120d-2E, R120e-1E, R120e-2E, T120d, T120e, GT110e, GT110e-S, R110f-1E,
R110e-1E, T110f-E, T110f-S, E120d-1, B110d, B120d, B120d-h, B120e,
B120e-h, B120f, B120f-h, T110g-S, T110g-E, R110g-1E, T120f, R120f-1E,
R120f-2E, T110h-S, T110h, R110h-1, R120g-2E, T120g, E120g-M, R120g-1E,
B120g-h
- N8103-149 RAID Controller (512MB, RAID 0/1)
- N8103-150 RAID Controller (512MB, RAID 0/1/5/6)
- N8103-151 RAID Controller (1GB, RAID 0/1/5/6)
- N8103-152 RAID Controller (1GB, RAID 0/1/5/6)
- N8103-160 RAID Controller (1GB, RAID 0/1/5/6)
- N8103-161 RAID Controller (1GB, RAID 0/1/5/6)
- N8103-167 RAID Controller (1GB, RAID 0/1/5/6)
- N8103-168 RAID Controller (1GB, RAID 0/1/5/6)
- N8103-171 RAID Controller (0MB, RAID 0/1)
- N8103-172 RAID Controller (512MB, RAID 0/1)
- N8103-173 RAID Controller (512MB, RAID 0/1/5/6)
- N8103-174 RAID Controller (1GB, RAID 0/1/5/6)
- N8103-176 RAID Controller (1GB, RAID 0/1)
- N8103-177 RAID Controller (1GB, RAID 0/1/5/6)
- N8103-178 RAID Controller (2GB, RAID 0/1/5/6)
- N8103-179 RAID Controller (2GB, RAID 0/1/5/6)
- N8103-188 RAID Controller (0GB, RAID 0/1)
- N8403-059 RAID Controller Kit(512MB, RAID 0/1)
- N8404-007 Storage and I/O Blade AD106c
- NE3303-177 RAID Controller (1GB, RAID 0/1/5/6)
- NE3303-178 RAID Controller (2GB, RAID 0/1/5/6)
- NE3303-H004 RAID Controller (2GB, RAID 0/1/5/6)
Carefully read the following user license agreement for NEC software
before using this software.
If you do not agree to the terms of the agreement, do not download this
software. By downloading this software, you agree to be bound by the terms
of the agreement.
[User license agreement for NEC software]
This user license agreement is an agreement between you and NEC Corporation
(hereinafter called "NEC").
Under the following terms of this agreement, NEC grants you the right to
use the software program (hereinafter called "licensed program"), and you
are to agree to the terms. You are to take responsibilities for the choice,
installation, or use of the licensed program, or the results of the usage
of the usage of the licensed program.
1. Term
(1) This user license agreement goes into effect on the day you receive
this software product.
(2) You may terminate the right to use the licensed program under this
license agreement at any time by giving NEC a month's or longer notice
by letter.
(3) NEC may terminate your right to use the licensed program at any time,
if you fail to comply with the terms of this user license agreement.
(4) Your right to use the licensed program continues to exist until it
terminates in accordance with the provisions of this user license
agreement.
(5) When your right to use the licensed program terminates, all of your
other rights under this user license agreement also terminate. You must
destroy the licensed program, all the copies of the licensed program,
and the related documents (e.g., manuals) provided with the licensed
program as soon as your right to use the licensed program terminates.
2. Use right
You may use the licensed program only on NEC Express5800 servers using Windows
as follows.
- Windows Server 2016
- Windows Server 2012 R2
- Windows Server 2012
- Windows Server 2008 R2
- Windows Server 2008
- Windows Server 2003 R2 SP2 or later
- Windows 10
- Windows 8.1
- Windows 8
- Windows 7
- Windows XP Professional SP3 or later
- Windows Small Business Server 2011
3. Copy, alteration, and linkage of the licensed program
(1) You may make a copy of the licensed program only to use it as a backup
copy in case the program data is lost or destroyed. However, this is
not the case if the licensed program is installed in fixed storage.
In this case, you may keep it only to use in case the storage medium of
the licensed program is lost or destroyed.
(2) You must give the expressions of the copyright of the licensed program
and other rights to all the copies of the licensed program.
(3) Unless otherwise specified in this user license agreement, you may not
use, copy, alter, or link the licensed program, you may not reproduce
it in publications or networks, or you may not make your own decision
on handling it in any other ways.
(4) You may not copy the related documents (e.g., manuals) provided with
the licensed program or reproduce them in publications or networks
under any circumstances.
(5) This user license agreement is not to transfer the intellectual
property for the licensed program to you.
4. Transfer of the licensed program
(1) You may transfer all of your rights under this user license agreement
only if satisfying all the following condition:
(a) You are to transfer this user license agreement, the licensed program,
all the copies of the licensed program, and the related documents
(e.g., manuals) provided with the licensed program, and retain none of
them.
(b) The recipient agrees to the terms of this user license agreement.
(2) Unless otherwise specified in this user license agreement, you may not
loan or transfer the licensed program or the right to use it to a third
party, or you may not make your own decision on handling it in any
other ways.
5. Decompilation
You may not reverse engineer, decompile, or disassemble the licensed program.
6. Term of a guarantee
(1) NEC does not give any guarantee for the licensed program. You are to be
liable and to pay for problems arising from the use of the licensed
program.
(2) Irrespective of the term (1), when NEC corrects licensed-program errors
(bugs), NEC may, at its discretion, provide an error-corrected program,
a program for correction (hereinafter called a modification program),
or information for correction by an NEC-decided method. The modification
program provided to you is regarded as the licensed program.
7. No liability
NEC assumes no liability for your lost profit, damages arising from
special circumstances (including damages which NEC can or could foresee),
or damages you are asked for by any third party.
8. Others
Disputes over this user license agreement are to be settled at the Tokyo
District Court as the exclusively agreed competent court.
---------------------------------------------------------------------------
[Installation Procedure]
Please extract the installation image and then start installation.
Refer to the "Universal RAID Utility User's Guide" which is contained in
the installation image for the detailed procedure of the installation.
(1) Download the archives "006740-G05_636560353596122505.zip" and
"uru41eug_compH.zip".
(2) Copy the archives to any folder in the server in which this software
will be installed.
(3) The archives "006740-G05_636560353596122505.zip" and "uru41eug_compH.zip"
are in the Windows ZIP format.
After extracting the archives, the following files will appear.
- Universal RAID Utility Ver4.1 Installation Image
006740-G05_636560353596122505 folder
- windows folder
- Setup.exe - Universal RAID Utility Setup Program
- eci folder - Setup Program related modules
- Universal RAID Utility Update Tool - for ExpressUpdate
- Universal RAID Utility User's Guide
- uru41eug.pdf - User's Guide
- uru41euga.pdf - Appendix A : Glossary
- uru41eugb.pdf - Appendix B : raidcmd Command Reference
- uru41eugc.pdf - Appendix C : Logs/Events
(4) To install this software, please refer to the section [Installation
and Uninstallation] in "Universal RAID Utility User's Guide".
---------------------------------------------------------------------------
[General Notice]
1. The target Express5800 models and RAID Controllers for this software are
different from those for Universal RAID Utility Ver2.36 and Ver4.02. If
your system environment does not match any of the models and RAID
Controllers shown in [Applicable model] and [Users] above, please use
Universal RAID Utility Ver2.36 or Ver4.02.
2. The RAID Viewer and the Log Viewer are not available in Windows Server
2008 or Windows Server 2008 R2 or Windows Server 2012 or Windows Server
2012 R2 or Windows Server 2016 Server Core.
Use raidcmd with the administrative right.
3. About support of Solid State Drive(SSD)
To display the Solid State Drive correctly in the environment where
the onboard RAID Controllers (LSI Embedded MegaRAID) are used, you
need the driver ver14.00.1026 or later which supports the Solid State
Drive.
Please check if the version of driver is 14.00.1026 or later.
4. The maximum number of IP addresses on OS that can be enabled in the
computer is 42.
Universal RAID Utility cannot communicate with NEC ESMPRO Manager if more
than 42 IP addresses are set enabled.
5. The TCP ports Universal RAID Utility uses have been changed in Ver2.61 and
the later versions as follows.
data port - 52805(Ver2.6 and earlier) - 5016(Ver2.61 and later)
event port - 52806(Ver2.6 and earlier) - 5017(Ver2.61 and later)
raidsrv Agent - 52807(Ver2.6 and earlier) - 5018(Ver2.61 and later)
The change has no effect on operations of Universal RAID Utility.
In the following cases, however, you must change the settings of Universal
RAID Utility depending on your environment settings. Be sure to check the
description in [TCP ports used by Universal RAID Utility] in the Universal
RAID Utility User's Guide.
(1) You customized the TCP ports Universal RAID Utility uses and you would
like to continue using them, and/or
(2) You are going to update Universal RAID Utility from Ver2.6 or earlier
versions to Ver2.61 or later versions using ExpressUpdate.
Also you must change the settings of other applications in the following
cases. Be sure to check the description in [TCP ports used by Universal
RAID Utility] in the Universal RAID Utility User's Guide.
(1) You have specified the TCP port numbers Universal RAID Utility uses
for the firewall settings, and/or
(2) Other applications in you environment have been using the TCP ports,
5016, 5017, and 5018.
6. Notes on use of function to Make/Remove Hot Spare by NEC ESMPRO Manager
You can use this function only NEC ESMPRO Manager Ver. 5.72 or later.
---------------------------------------------------------------------------
[Revision History]
2018/3/31 Ver4.1 Rev 3556
"Enhancement"
1. "Description", "Deal Method" updated for some events
2016/12/21 Ver4.1 Rev 3037
"Enhancement"
1. Additional support of the following OS
- Windows Server 2016
2016/8/1 Ver4.1 Rev 3037
"Enhancement"
1. Additional support of the applicable model
- Express5800/R120g-2E
- Express5800/T120g
- Express5800/E120g-M
- Express5800/R120g-1M
- Express5800/R120g-2M
- Express5800/R120g-1E
- Express5800/B120g-h
2016/2/19 Ver4.1 Rev 3037
"Enhancement"
1. Additional support of the following OS
- Windows 10
2016/1/29 Ver4.1 Rev 3037
First version released.
"Enhancement"
1. Additional support of the following RAID Controllers
- N8103-188 RAID Controller (0GB, RAID 0/1)
2. Additional support of the applicable model
- Express5800/T110h-S
- Express5800/T110h
- Express5800/R110h-1
3. Universal RAID Utility Ver4.1 can support Windows PowerShell.
4. Change of default value to update firmware of RAID controller.
5. Removing the restriction that the numbers of Physical Devices when you
create RAID10.
6. Removing the restriction that you cannot specify the capacity freely
when you create RAID 10, RAID 50 and RAID 60.
7. Change of feature about monitoring the lifetime of SSD.
8. Universal RAID Utility Ver4.1 can support monitoring lifetime of SSD
when you use not only optional RAID Controller but also Onboard RAID
Controller (LSI Embedded MegaRAID).
9. Removing the restriction that cannot specify all capacity that includes
less than Gigabyte when you create logical drive.
10. Change of signage about SSD.
---------------------------------------------------------------------------
[Attached Files]
size date filename
--------+-------------------+----------------------------------------------
36810267 2018-03-07 16:04:42 006740-G05_636560353596122505.zip
3655451 2018-03-07 16:12:22 uru41eug_compH.zip
You can check the integrity of the downloaded file by comparing the
following values in the md5sum column and the MD5 checksums of the files
you have downloaded. If the checksums do not match, it means an error
occurred during download.
md5sum filename
---------------------------------+-----------------------------------------
fca26c140934bf71d98f8c2e2e83a682 006740-G05_636560353596122505.zip
22cb7968135c810c9e6f14d68b217a68 uru41eug_compH.zip
- 006740-G05_636560353596122505.zip
date size filename
------------------+----------------+---------------------------------
2018/03/01 18:45 7,736 readme_jp.txt
2011/05/13 20:11 509 setup.iss
2018/03/07 16:04 146 ExUpHash.xml
2018/03/07 16:04 22,067 ExUpInfo.xml
2011/05/09 11:09 37 uruSetup.bat
2018/03/01 18:46 7,951 readme_en.txt
2013/02/19 21:16 11,867 uruSetup.js
2018/02/14 14:23 13,026,720 windows/Setup.exe
2018/02/14 14:14 8,192 windows/eci/1033.mst
2018/02/14 14:14 318 windows/eci/setup.iss
2018/02/14 14:13 2,243,470 windows/eci/ISSetup.dll
2018/02/14 14:13 328,704 windows/eci/ExpressUpdate Agent.msi
2018/02/14 14:13 197 windows/eci/update.iss
2018/02/14 14:14 4,214,054 windows/eci/Data1.cab
2018/02/14 14:13 36,352 windows/eci/1041.mst
2018/02/14 14:13 2,330,422 windows/eci/setup.exe
2018/02/14 14:13 3,919,945 windows/eci/src/libiconv-1.9.2.tar.gz
2018/02/14 14:13 8,247,659 windows/eci/src/axis2c-src-1.6.0.zip
2018/02/14 14:13 1,172 windows/eci/src/axis2c-src-1.6.0.patch
2018/02/14 14:13 6,331 windows/eci/src/openslp-2.0.beta1.patch
2018/02/14 14:13 554 windows/eci/src/axis2c-1.6.0.patch
2018/02/14 14:13 381 windows/eci/src/readme.txt
2018/02/14 14:13 5,642,684 windows/eci/src/openslp-2.0.beta1.zip
2018/02/14 14:13 45 windows/eci/src/revision.txt
2018/02/14 14:13 6,406 windows/eci/doc/OpenSSL_license.txt
2018/02/14 14:13 1,249 windows/eci/doc/zlib_license.txt
2018/02/14 14:13 1,686 windows/eci/doc/OpenSLP_license.txt
2018/02/14 14:13 568 windows/eci/doc/ApacheNotice.txt
2018/02/14 14:13 3,458 windows/eci/doc/OpenSLP_EULA.txt
2018/02/14 14:13 1,162 windows/eci/doc/MIT_license.txt
2018/02/14 14:13 2,244 windows/eci/doc/OpenSSL_WOILA.txt
2018/02/14 14:13 11,560 windows/eci/doc/ApacheLicense_v2.txt
2018/02/14 14:13 25,283 windows/eci/doc/LGPL_v2.txt
- uru41eug_compH.zip
date size filename
------------------+----------------+---------------------------------
2018/02/27 11:40 4,029,809 uru41eug.pdf
2015/10/09 14:18 78,843 uru41euga.pdf
2015/10/09 14:21 202,140 uru41eugb.pdf
2018/02/27 12:42 449,379 uru41eugc.pdf
---------------------------------------------------------------------------
[Trademarks and Copyright]
The copyright for this software is held by NEC.
*Microsoft, Windows and Windows Server are either registered trademarks or
trademarks of Microsoft Corporation in the United States and/or other
countries.
*All other company and product names in this document are the registered
trademarks or trademarks of their respective owners.
---------------------------------------------------------------------------
Copyright NEC Corporation 2007-2018