================================================================================
NEC Express5800 Series
EXPRESSBUILDER Version 7.10-011.05
================================================================================
<Name>            EXPRESSBUILDER Version 7.10-011.05
<Model(s)>        Express5800/GT110h, R110h-1, T110h, T110h-S
<Target Users>    See below
<Type>            EXPRESSBUILDER
================================================================================


<Description>
 EXPRESSBUILDER is included with NEC Express5800 Server as standard.
 EXPRESSBUILDER provides the Windows installation feature, server management 
 software, drivers, instruction manuals, and other features.

  - Software version
    EXPRESSBUILDER Version 7.10-011.05 : 
    Supported the Windows Server 2008 R2 installation on Embedded RAID Controller.

<Target Users>
 For users who use the following server model(s) and EXPRESSBUILDER version(s):

  - Model(s)
    Express5800/GT110h
    Express5800/R110h-1
    Express5800/T110h
    Express5800/T110h-S
     
  - Version(s)
    EXPRESSBUILDER Version 7.10-011.01
    EXPRESSBUILDER Version 7.10-011.02
    EXPRESSBUILDER Version 7.10-011.03
    EXPRESSBUILDER Version 7.10-011.04
    EXPRESSBUILDER Version 7.10-011.05  :  (the same version as this software)


  --- Confirm your EXPRESSBUILDER version
  If the last number of your version is "05" or less,
  you can update your computer by using this software.

  a) EXPRESSBUILDER DVD
     -- Look at the DVD label to find out the version.

  b) Internal Flash Memory

     [Using Windows Application]
      1. Run the shortcut of desktop or NEC EXPRESSBUILDER from Windows
         Start Menu.
      2. Choose Versions.
      3. Read [EXPRESSBUILDER version] displayed on the top of screen.

     [Using Internal Flash Memory]
      1. Turn on the server and press <F3> key when the following message
         appears at the POST screen.
            Press <F2> SETUP, <F3> Internal Flash Memory,...
      2. Choose Versions.
      3. Read [EXPRESSBUILDER version] displayed on the top of screen.


Read carefully the following agreement before downloading.
If you do not agree to the terms of the agreement, do not download this software.
By downloading the software, you are bound by the terms of the agreement. 

<User License Agreement>
NEC Corporation ("NEC") grants you the right to use the software 
program ("Software") under the terms and conditions of this Agreement
only in the country where you acquired the Software. You shall agree to all 
provisions of this Agreement and assume responsibility for selection, 
installation, use and effect of the Software purchased for your desired effect.

1. Period
 1.1 This Agreement shall come into force on the day of the first download.
 1.2 You may terminate the license granted hereunder by notifying us in writing
     at least one month prior to the desired termination date.
 1.3 NEC may terminate the license granted you hereunder at any time if you
     fail to comply with any terms and conditions of this Agreement. 
 1.4 The license to the Software shall remain in force until the license is
     terminated on the date set forth hereunder. 
 1.5 Upon termination of the license, other rights granted you hereunder shall
     also be terminated. You must destroy or dispose of the Software, any 
     copies of the Software and manual and other materials provided with the 
     Software. 

2. Copyright 
 2.1 The Software shall solely be used in Express5800 servers or workstations.
 2.2 NEC grants you the right to use the Software only in the country in which
     you acquired the Software in accordance with the conditions of the
     preceding paragraph.

3. Copying, altering, and combining of the Software
 3.1 You may only make one copy of the Software solely for a backup purpose,
     provided, however, that the copy of the Software is loaded into permanent
     memory of the system. You may store the Software solely to prevent damages
     or loss of the memory media.
 3.2 You shall place the copyright notice and other legends on each copy of the
     Software.
 3.3 You may not use, copy, alter, combine, publish, reproduce the Software 
     over the Internet, or otherwise dispose of the Software except as provided
     in this Agreement. 
 3.4 You may not copy, publish the manual or other related documentation
     provided with the Software, or reproduce such manual and documentation 
     over the Internet.
 3.5 No intangible property right to the Software shall be transferred to you.

4. Transfer
 4.1 You may assign your rights granted hereunder to a third party only if all
     conditions below are satisfied: 
     a. You shall assign and shall not retain this Agreement, the Software, all
        copies of the Software, or the manual or other related documentation
        provided with the Software. 
     b. The transferee agrees to this Agreement.
 4.2 You shall not sublicense, assign, transfer, or otherwise dispose of the
     Software or the right of use to any third party except as provided herein.

5. Reverse compile
 You may not reverse engineer, decompile, or otherwise disassemble the Software.

6. Limitation of warranties
 6.1 THE SOFTWARE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. NEC DISCLAIMS
     ALL WARRANTIES FOR THE SOFTWARE, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT
     LIMITED TO, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
     FURTHER, NEC MAKES NO REPRESENTATION OR WARRANTY THAT THE USE OF ANY SOFTWARE
     WILL NOT INFRINGE ANY THIRD PARTY'S RIGHTS, INCLUDING BUT NOT LIMITED TO, ANY
     INTELLECTUAL PROPERTY RIGHTS. IN NO EVENT SHALL NEC BE HELD LIABLE WITH RESPECT
     TO ANY CLAIM BY YOU OR ANY THIRD PARTY ON ACCOUNT OF OR ARISING OUT OF THE USE
     OF THE SOFTWARE.

 6.2 Notwithstanding the provisions of the preceding paragraph, in case NEC
     makes any bug-fix version to the Software, NEC will, at its expense,
     furnish you with such bug-fix version, update version, or information in
     relation to such bug-fix or update version both in the source code form and
     object code form, and such bug-fix version or update version shall be
     considered as the licensed Software.

7. No liability 
 IN NO EVENT SHALL NEC BE LIABLE FOR ANY INDIRECT OR CONSEQUENTIAL DAMAGES OR
 LOSS OF PROFIT OR DAMAGES BASED ON ANY THIRD PARTY CLAIM, EVEN IF NEC HAS BEEN
 ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. 

8. Miscellaneous
 If the Software has a file written about software license (hereinafter referred
 to as "License File"), the terms of License File are applied to the files 
 specified in License File, regardless of the above-mentioned articles (1-7).


================================================================================
Usage
================================================================================

  Follow the steps below to install this software.

  - Creating EXPRESSBUILDER DVD: 
    1. Download the file into any local folder.
    2. Burn the file onto DVD-R as an ISO image.


  - Installing EXPRESSBUILDER to Internal Flash Memory:
  
    [Using Windows]
     1. Log on to the Windows on the server as Administrator.
     2. Insert the burned EXPRESSBUILDER DVD into the DVD drive.
        Autorun Menu will appear.
     3. Click Maintenance, and click Update.

    [Using DVD]
     1. Insert the burned EXPRESSBUILDER DVD into the DVD drive
        and restart the server.
     2. From Boot Selection Menu, choose OS installation.
        Home Menu will appear.
     3. Click Utilities, click Internal Flash Memory, 
        and click Update.
     4. Remove the DVD and restart the server, and then log on to the Windows on
        the server as Administrator.
     5. Open the Command Prompt window and update the repository by using
        the following command.
 
      - On 32 bit Edition
        "C:\Program Files\EXPRESSBUILDER\ar_menu\eb_cli.exe" 'load /repository'

      - On 64 bit Edition
        "C:\Program Files (x86)\EXPRESSBUILDER\ar_menu\eb_cli.exe" 'load /repository'


--------------------------------------------------------------------------------
<Revision History>
2016/10/25  1st edition: Uploaded the 7.10-011.05.iso

--------------------------------------------------------------------------------
<Copyright and Trademark>

All contents on this software are the copyright of NEC corporation or the third
party software developer.

 * Microsoft, Windows, Windows Server, Windows Vista, and BitLocker are 
   trademarks or registered trademarks of Microsoft Corporation in the United 
   States and other countries.
 * All other product, brand, or trade names used in this document are 
   the trademarks or registered trademarks of their respective companies.

--------------------------------------------------------------------------------
   Copyright NEC Corporation 2016