================================================================================
Release Notes for
NEC Express5800/R320d,R310d
System BIOS 7.0:29
================================================================================
Software name     : NEC Express5800/R320d,R310d BIOS update module
Module file       : 010015-G02_636081738523359372.zip
Models            : NEC Express5800/R320d-M4 (N8800-185F, NP8800-185FP1)
                    NEC Express5800/R320d-E4 (N8800-184F, NP8800-184FP1)
                    NEC Express5800/R310d-E4 (N8800-193F)
Operating System  : This software supports the following OS
                    - Microsoft(R) Windows Server(R) 2008 R2
                    - Microsoft(R) Windows Server(R) 2012 Standard
                    - Microsoft(R) Windows Server(R) 2012 Datacenter
                    - VMware ESXi(R) 5.5
Target users      : See [Server models for update] below
Type              : System BIOS
================================================================================

--------------------------------------------------------------------------------
[About the software]

This BIOS update module (hereinafter called "this software") supports 
the following functional enhancement in the NEC Express5800/R320d-M4, R320d-E4
and NEC Express5800/R310d-E4 models:

BIOS 7.0:29
  - Fixed the issue that systems rarely fail to duplex, when a keyboard
    is pressed during booting OS.
  - Fixed the issue that keyboard may stop working when the F8 key 
    is pressed rapidly for safe mode before booting OS.

Note:
  To prevent a system failure, please read this document carefully and 
  follow the procedure for successful update.  Should your system 
  malfunctions or is powered off due to an unplanned event during update (for
  example, power blackout or cutoff, lightening, and noise), the system may 
  be damaged and fails to operate normally.  In this case, any remedial 
  measures shall be taken at your expense.

-------------------------------------------------------------------------------
[Server models for update]

Users who use the following server models and BIOS versions need update:
 - Models to update: 
    NEC Express5800/R320d-M4
    NEC Express5800/R320d-E4
    NEC Express5800/R310d-E4

 - BIOS versions to update:
    BIOS Version 7.0:25
    BIOS Version 7.0:27

NOTE:
If current BIOS version is later than the above, update is not required.

NOTE:
System is not supported to downgrade from current BIOS version to older one.

- How to confirm BIOS version (Windows(R) OS):

    (1) Run ft server Utility

       <Windows Server(R) 2008 R2>
        (Start->All programs->NEC ESMPRO Agent->ft server utility)

       <Windows Server(R) 2012>
        (Start->(Right-click somewhere in an empty space on the Start screen)
         ->All apps->NEC ESMPRO Agent->ft server utility)

    (2) Select [CPU Module(ID:0)] and [CPU Module(ID:1)] of [CPU Module]
        in [FTServer] tree and confirm BIOS version by AdditionalInformation 
        of Firmware area.


 - How to confirm BIOS version (VMware ESXi(R)):

    (1) Login to ftSys Management Appliance as a root user.

    (2) Run the following commands and confirm  [Firmware Rev].

        # /opt/ft/bin/ftsmaint ls 0 or
        # /opt/ft/bin/ftsmaint ls 1

        '0' means CPU Module of CPU/IO Module 0.
        '1' means CPU Module of CPU/IO Module 0.

--------------------------------------------------------------------------------
[User License Agreement]

NEC Corporation ("NEC") grants you the right to use the software program
("Software") under the terms and conditions of this Agreement only in the 
country in which you acquired the Software. You shall agree to all provisions 
of this Agreement and assume responsibility for selection, installation, use 
and effect of the Software purchased for your desired effect.

1. Terms 
1.1 This Agreement shall come into force on the date of your receipt of the
    Software.
1.2 You may terminate the license granted hereunder by notifying us in writing
    at least one month prior to the desired termination date.
1.3 NEC may terminate the license granted you hereunder at any time if you
    fail to comply with any terms and conditions of this Agreement. 
1.4 The license to the Software shall remain in force until the license is
    terminated on the date set forth hereunder. 
1.5 Upon termination of the license, other rights granted you hereunder shall
    also be terminated. You must destroy or dispose of the Software, any copies
    of the Software and manual and other materials provided with the Software. 

2. Copyright 
2.1 The Software shall solely be used in the NEC Express5800 servers and
    workstations.
2.2 NEC grants you the right to use the Software only in the country in which
    you acquired the Software in accordance with the conditions of the
    preceding paragraph.

3. Copying, altering, and combining of the Software
3.1 You may only make one copy of the Software solely for a backup purpose,
    provided, however, that the copy of the Software is loaded into permanent
    memory of the system. You may store the Software solely to prevent damages
    or loss of the memory media.
3.2 You shall place the copyright notice and other legends on each copy of the
    Software.
3.3 You may not use, copy, alter, combine, publish, reproduce the Software over
    the Internet, or otherwise dispose of the Software except as provided in
    this Agreement. 
3.4 You may not copy, publish the manual or other related documentation
    provided with the Software, or reproduce such manual and documentation over
    the Internet.
3.5 No intangible property right to the Software shall be transferred to you.

4. Transfer
4.1 You may assign your rights granted hereunder to a third party only if all
    conditions below are satisfied: 
    a. You shall assign and shall not retain this Agreement, the Software, all
       copies of the Software, or the manual or other related documentation
       provided with the Software. 
    b. The transferee agrees to this Agreement.
4.2 You shall not sublicense, assign, transfer, or otherwise dispose of the
    Software or the right of use to any third party except as provided herein.

5. Reverse compile
   You may not reverse engineer, decompile, or otherwise disassemble the
   Software.

6. Limitation of warranties
6.1 The Software is provided "as is" without warranty of any kind. In no event
    shall NEC be liable with respect to any claim by you on account of or
    arising out of the use of the Software.
6.2 Notwithstanding the provisions of the preceding paragraph, in case NEC
    makes any bug-fix version to the Software, NEC will, at its expense,
    furnish you with such bug-fix version, update version, or information in
    relation to such bug-fix or update version both in the source code form and
    object code form, and such bug-fix version or update version shall be
    considered as the licensed Software.

7. No liability 
    In no event shall NEC be liable for any indirect or consequential damages
     or loss of profit or damages based on any third party claim, even if NEC 
    has been advised of the possibility of such damages.

--------------------------------------------------------------------------------
[Update procedures]

  1. Download the module into any directory of hard disk.
  2. Extract the module into any directory.
  3. The software and its procedure manual will be extracted into the forder.

  You can refer to the procedure manual(ReadMe_E.txt) by Notepad of Windows(R) 
  OS. Execute the BIOS Update following the manual.

--------------------------------------------------------------------------------
[Revision history]

Apr. 2014 BIOS version 7.0:25 (1st Edition)

Nov. 2014 BIOS Version 7.0:27 (2nd Edition)
  - Updates critical microcode, Intel(R)Xeon(R)Processor E5-2600v2 series

Aug. 2016 BIOS Version 7.0:29 (3rd Edition)
  - Fixed the issue that systems rarely fail to duplex, when a keyboard
    is pressed during booting OS.
  - Fixed the issue that keyboard may stop working when the F8 key 
    is pressed rapidly for safe mode before booting OS.

--------------------------------------------------------------------------------
[Legal notices (trademarks and copyrights)]

All contents on this software are the copyright of NEC Corporation or the 
third-party software developer.

EXPRESSSCOPE is a registered trademark of NEC Corporation.

Microsoft, Windows and Windows Server are either registered trademarks or 
trademarks of Microsoft Corporation in the United States and/or other countries.

VMware, VMware ESXi and VMware vSphere are registered trademark or trademark
of VMware, Inc in the United States and/or other jurisdictions. 
All other marks and names mentioned herein may be trademarks of their respective
companies.

Intel, Xeon are registered trademarks of Intel Corporation in the U.S. and/or
other countries.

All other company names and product names mentioned herein are registered
trademarks or trademarks of their respective owners.

--------------------------------------------------------------------------------
Copyright NEC Corporation 2016