======================================================================
WBEM Provider and CLI tool (for VMware ESXi 6.7)
======================================================================
[Software name ] WBEM Provider (not applicable)
Smart Storage Administrator CLI for VMware ESXi
(5.10.45.0)
[Registered name ] ssacli-5.10.45.0-6.7.0.zip
[Copyright (C) ] Hewlett Packard Enterprise
[Supported server models]
- Express5800/R120h-1M
- Express5800/R120h-1M (2nd-Gen)
- Express5800/R120h-1M (3rd-Gen)
- Express5800/R120h-2M
- Express5800/R120h-2M (2nd-Gen)
- Express5800/R120h-2M (3rd-Gen)
- Express5800/R120h-1E
- Express5800/R120h-2E
- Express5800/T120h
- Express5800/R110j-1
[RAID Controllers]
- N8103-189 RAID Controller (RAID 0/1)
- N8103-190 RAID Controller (2GB, RAID 0/1/5/6)
- N8103-191 RAID Controller (4GB, RAID 0/1/5/6)
- N8103-192 RAID Controller (RAID 0/1)
- N8103-193 RAID Controller (2GB, RAID 0/1/5/6)
- N8103-194 RAID Controller (4GB, RAID 0/1/5/6)
- N8103-195 RAID Controller (RAID 0/1)
- N8103-196 RAID Controller (4GB, RAID 0/1/5/6)
- N8103-201 RAID Controller (2GB, RAID 0/1/5/6)
- N8103-238 RAID Controller (8GB, RAID 0/1/5/6)
[SSD Adapter for OS Boot]
- N8103-239 480GB SSD Adapter for OS Boot (RAID 1)
[Supported users ] All users using the above server on which
the firmware stored in Starter Pack Version
S8.10-010 applied and the following VMware ESXi
is installed.
- VMware ESXi 6.7 Update 3 EP 13 or later
Please check the following website.
http://www.58support.nec.co.jp/global/download/N8103-239/WBEM_uninstall_en.pdf
[Software type ] Utility
[Format ] zip
======================================================================
[Software Introduction]
WBEM Provider and CLI tool (hereinafter called "this software") is a
module required to manage the RAID System on the VMware ESXi 6 or
later virtualized platform.
WBEM Provider is not supported in [Supported users ].
Smart Storage Administrator CLI for VMware ESXi is RAID System
Management Utility for the following RAID Controllers and SSD Adapter
for OS Boot..
Carefully read the following user license agreement for NEC software
before using this software.
If you do not agree to the terms of the agreement, do not download this
software. By downloading this software, you agree to be bound by the
terms of the agreement.
[User license agreement for NEC software]
This user license agreement is an agreement between you and NEC
Corporation (hereinafter called "NEC").
Under the following terms of this agreement, NEC grants you the right
to use the software program (hereinafter called "licensed program"),
and you are to agree to the terms. You are to take any responsibility
for the selection of, installation of , use of, or results from the
use of, the licensed program.
1. Term and termination
(1) This user license agreement is effective from the date you receive
this software product.
(2) You may terminate it under this license agreement at any time by
giving NEC a written notice no less than one month prior to the
date you wish to do so.
(3) NEC may terminate your right to use the licensed program at any
time, if you fail to comply with the terms of this user license
agreement.
(4) Your right to use the licensed program continues to exist until
it is terminated in accordance with the provisions of this user
license agreement.
(5) Immediately upon termination of your right to use the licensed
program, all of your other rights under this user license
agreement will terminate. You must destroy the licensed program,
all copies thereof, and related documents (e.g., manuals) provided
with the licensed program immediately upon termination of your
right to use the licensed program.
2. Use right
(1) You may use the licensed program only on NEC Express5800 series
servers in which the following VMware ESXi is installed.
- VMware ESXi 6.7 Update 3 EP 13 or later
3. Copy, modify, or merge copies of the licensed program
(1) You may make a single copy of the licensed program only for your
backup purpose in case of the licensed program data loss or
corruption; provided, however, that this does not apply to the
case where the licensed program is installed in a fixed memory.
In this case, you may make a single copy of the licensed program
only for your backup and storage puropose in case of loss or
corruption of the storage medium of the licensed program.
(2) You must display the copyright and other proprietary rights
notices that appear on and in the licensed program on all copies
of the licensed program.
(3) Unless otherwise specified in this user license agreement, you may
not use, copy, modify, or merge copies of the licensed program,
publish or distribute any information contained in or materials of
the licensed program in publications or through networks, or make
your own decision on handling it in any other way.
(4) You may not copy the related documents (e.g., manuals) provided
with the licensed program or publish them in publications or
through networks under any circumstances.
(5) This user license agreement does not transfer the intangible
property rights associated with the licensed program to you.
4. Transfer to third party
(1) You may transfer all of your rights under this user license
agreement to a third party, provided that all of the following
conditions are satisfied:
(a) You transfer this user license agreement, the licensed program
all copies of the licensed program,, and all related documents
(e.g., manuals) provided with the licensed program to the third
party, and retain none of them.
(b) The transferee agrees to the terms of this user license agreement.
(2) Unless otherwise specified in this user license agreement, you may
not rent or lease the use right in the Licensed Software, transfer
the licensed program to the third party, transport the licensed
program, or make your own decision on handling it in any other way.
5. Decompilation
You may not carry out reverse engineering of, decompile, or disassemble
the licensed program.
6. Warranty
(1) NEC does not provide any guarantee for the licensed program. You
are liable to pay for all cost arising from problems as a result
of the use of the licensed program.
(2) Irrespective of the term (1), when NEC corrects licensed-program
errors (bugs), NEC may, at its discretion, provide an error-corrected
program, a program for correction (hereinafter called a modification
program), or information for correction by an NEC-decided method.
The modification program provided to you is regarded as the licensed
program.
7. Limitation of liability
NEC assumes no liability for your lost profit, damages arising from
special circumstances (including damages which NEC can or could foresee),
or damages claimed to you by any third party.
8. Others
Disputes over this user license agreement are to be settled at the
Tokyo District Court as the exclusively agreed competent court.
----------------------------------------------------------------------
[Setup Procedure]
[Pre-confirmation Procedure]
(a) Execute the following command and confirm the installation of
smx-provider which is VIB package.
# esxcli software vib list | less
If it is already installed, execute [Uninstallation Procedure].
Please check the following website.
http://www.58support.nec.co.jp/global/download/N8103-239/WBEM_uninstall_en.pdf
(b) Execute the following command and confirm the version of
ssacli which is VIB package.
# esxcli software vib list | less
If the versions of ssacli match, uninstall and install are not required.
5.10.45.0-6.7.0.7535516.oem
[Installation Procedure]
(1) Copy zip file(s) to the client terminal where access to
VMware Host Client.
(2) Unzip the file(s).
(3) Start VMware Host Client. Connect to ESXi as a user with administrator
rights and enter the Maintenance Mode.
To switch ESXi to maintenance mode, connect to ESXi with VMware Host
Client, right-click [Host] in [Navigator], and select
[Enter Maintenance Mode].
(4) Select the ESXi icon in the inventory and click the [Configuration]
tab.
(5) Select [Storage] in [Navigator] to display a list of datastores.
Right-click the datastore to which you are going to upload the
vib file and select [Browse].
(6) The datastore browser will appear.
Click [Create directory] to create a "vib" directory.
(7) Click "vib" directory and click [Upload].
(8) When an item upload window appears, select the vib file and then
click [Open].
(9) If a warning dialog box for upload/download appears, select [Yes].
(10) When the uploadiong file is displayed on datastore browser,
upload is completed.
(11) Select [Troubleshooting Options] from the direct console. Enable
ESXi Shell access from SSH or the direct console, and log
into ESXi Shell as a user with administrator rights. (To log into
ESXi shell from the direct console, press [Alt] + [F1].)
(12) Execute the following command and confirm the installation of
ssacli which is VIB package.
If it is already installed, execute [Uninstallation Procedure] step 3,4
and then re-execute from step 11.
(13) Execute the following command for the vib file to install Smart
Storage Administrator CLI for VMware ESXi:
# esxcli software vib install -v [Path]ssacli-5.10.45.0-6.7.0.vib
In [Path], specify an absolute path as below.
/vmfs/volumes/datastore1/vib/
(14) Execute the reboot command to restart the server.
(15) Log into ESXi Shell and execute the following command to
check that Smart Storage Administrator CLI for VMware ESXi
have been successfully installed.
# esxcli software vib list | less
(16) Delete the uploaded vib file used for installation and then log out
from ESXi Shell.
(If you logged into ESXi Shell from the direct console, execute
the exit command and then press [Alt] + [F2].)
(17) Select [Troubleshooting Options] from the direct console and then
return the ESXi Shell access settings to their original values.
Also connect to ESXi from VMware Host Client, and then exit
maintenance mode.
[Uninstallation Procedure]
(1) Start VMware Host Client. Connect to ESXi as a user with administrator
rights and enter the Maintenance Mode.
To switch ESXi to maintenance mode, connect to ESXi with VMware Host
Client, right-click [Host] in [Navigator], and select
[Enter Maintenance Mode].
(2) Select [Troubleshooting Options] from the direct console. Enable
ESXi Shell access from SSH or the direct console, and the log
into ESXi Shell as a user with administrator rights. (To log into ESXi
shell from the direct console, press [Alt] + [F1].)
(3) Execute the following command to uninstall WBEM Provider and Smart
Storage Administrator CLI for VMware ESXi.
# esxcli software vib remove -n smx-provider
# esxcli software vib remove -n ssacli
(4) Execute the reboot command to restart the server.
(5) Select [Troubleshooting Options] from the direct console and then
return the ESXi Shell access settings to their original values.
Also connect to ESXi from VMware Host Client, and then exit
maintenance mode.
[General Notices]
There is nothing.
----------------------------------------------------------------------
[Attached Files]
Length Date Time Name
-------- ---- ---- ----
8597276 06-21-21 14:05 ssacli-5.10.45.0-6.7.0.zip
-------- -------
8597276 1 files
You can check the integrity of the downloaded file by comparing the
following values in the md5sum column and the MD5 checksums of the file
you have downloaded. If the checksums do not match, it means an error
occurred during download.
md5sum | Filename
---------------------------------+------------------------------
f8de9d9ae26c8ca22c5ed868c67cbaaf ssacli-5.10.45.0-6.7.0.zip
- ssacli-5.10.45.0-6.7.0.zip (for VMware ESXi 6.7)
Length Date Time Name
-------- ---- ---- ----
8670804 03-02-21 01:10 ssacli-5.10.45.0-6.7.0.vib
-------- -------
8670804 1 file
----------------------------------------------------------------------
[Revision History]
2022/5/30 not applicable / 5.10.45.0
"Enhancement"
1. It supports the latest firmware(May 2022 version of firmware)
2022/4/26 not applicable / 5.10.45.0
"Enhancement"
1. It supports the latest firmware(April 2022 version of firmware)
2021/12/13 not applicable / 5.10.45.0
"Enhancement"
1. Additional support of the RAID Controller
- N8103-238 RAID Controller (8GB, RAID 0/1/5/6)
2. Additional support of the SSD Adapter for OS Boot
- N8103-239 480GB SSD Adapter for OS Boot (RAID 1)
3. It supports the latest firmware(December 2021 version of firmware)
2021/7/12 670.03.16.00.3 / 5.10.45.0
"Enhancement"
1. It supports the latest firmware(July 2021 version of firmware)
2020/12/14 670.03.16.00.3 / 4.21.7.0
"Enhancement"
1. It supports the latest firmware(December 2020 version of firmware)
2020/7/3 670.03.16.00.3 / 4.17.6.0
"Enhancement"
1. Additional support of the applicable model
- Express5800/R120h-1M (3rd-Gen)
- Express5800/R120h-2M (3rd-Gen)
2020/6/9 670.03.16.00.3 / 4.17.6.0
"Enhancement"
1. It supports the latest firmware(June 2020 version of firmware)
2020/2/17 670.03.16.00.3 / 3.40.3.0
"Enhancement"
1. It supports the latest firmware(February 2020 version of firmware)
2019/12/26 670.03.15.00.3 / 3.40.3.0
"Enhancement"
1. It supports the latest firmware(December 2019 version of firmware)
2. Additional support of the following OS
- VMware ESXi 6.7 Update 3 EP 13
2019/11/18 670.03.15.00.3 / 3.40.3.0
"Enhancement"
1. It supports the latest firmware(November 2019 version of firmware)
2. It supports the July 2019 version of firmware
2019/5/31 670.03.15.00.3 / 3.40.3.0
"Enhancement"
1. Additional support of the following OS
- VMware ESXi 6.7 Update 2
2. Additional support of the applicable model
- Express5800/R120h-1M (2nd-Gen)
- Express5800/R120h-2M (2nd-Gen)
2019/4/2 670.03.15.00.3 / 3.40.3.0
"Enhancement"
1. It supports the latest firmware(April 2019 version of firmware)
2018/12/26 670.03.14.00.2 / 3.30.14.0
"Enhancement"
1. Additional support of the applicable model
- Express5800/R110j-1
2018/11/19 670.03.14.00.2 / 3.30.14.0
"Enhancement"
1. Additional support of the following OS
- VMware ESXi 6.7 Update 1
2018/10/9 670.03.14.00.2 / 3.30.14.0
"Enhancement"
1. It supports the latest firmware(October 2018 version of firmware)
2018/9/18 670.03.14.00.2 / 3.30.14.0
First version released.
----------------------------------------------------------------------
[Trademarks and Copyright]
The copyright for this software is held by Hewlett Packard Enterprise.
NEC is permitted to distribute this software by Hewlett Packard
Enterprise.
* VMware is a registered trademark of VMware, Inc. in the United States
and/or other jurisdictions.
* All other company and product names in this document are the registered
trademarks or trademarks of their respective owners.
----------------------------------------------------------------------
Copyright NEC Corporation 2017-2022