===========================================================================
 Universal RAID Utility Ver6.0 (Linux Edition)
===========================================================================
 [Software name   ] Universal RAID Utility Ver6.0
 [Registered name ] 076770-G01_637758760399189310.zip
                    uru60eug_compA.tar.gz
 [Copyright (C)   ] NEC Corporation 2007-2022
 [Applicable model] Express5800/GT110e
                    Express5800/GT110e-S
                    Express5800/R110e-1E
                    Express5800/T110f-E
                    Express5800/T110f-S
                    Express5800/R110f-1E
                    Express5800/T120d
                    Express5800/T120e
                    Express5800/R120d-1M
                    Express5800/R120d-2M
                    Express5800/R120d-1E
                    Express5800/R120d-2E
                    Express5800/R120e-1M
                    Express5800/R120e-2M
                    Express5800/R120e-1E
                    Express5800/R120e-2E
                    Express5800/E120d-M
                    Express5800/E120d-1
                    Express5800/E120e-M
                    Express5800/B110d
                    Express5800/B120d
                    Express5800/B120d-h
                    Express5800/B120e
                    Express5800/B120e-h
                    Express5800/B120f
                    Express5800/B120f-h
                    Express5800/R120f-1M
                    Express5800/R120f-2M
                    Express5800/T110g-S
                    Express5800/T110g-E
                    Express5800/R110g-1E
                    Express5800/E120f-M
                    Express5800/T120f
                    Express5800/R120f-1E
                    Express5800/R120f-2E
                    Express5800/T110h-S
                    Express5800/T110h
                    Express5800/GT110h
                    Express5800/R110h-1
                    Express5800/R120g-2E
                    Express5800/T120g
                    Express5800/R120g-1M
                    Express5800/R120g-2M
                    Express5800/R120g-1E
                    Express5800/B120g-h
                    Express5800/D120h
                    Express5800/T110i-S
                    Express5800/T110i
                    Express5800/R110i-1
                    Express5800/T110j-S
                    Express5800/T110j
                    Express5800/T110j (2nd-Gen)
                    Express5800/T110k-S
                    Express5800/T110k
 [Users           ] For users who will install following Linux on NEC Express5800
                    series.
                    - Red Hat Enterprise Linux 7.1 - 7.9
                    - Red Hat Enterprise Linux 8.2 - 8.4
 [Software type   ] Utility
 [Creation method ] zip/tar.gz format
===========================================================================

[Software Introduction]
Universal RAID Utility (hereinafter called "this software") is RAID System
Management Utility for the following RAID Controllers.

  
  - Onboard RAID Controller on NEC Express5800/B120f
  - N8103-149 RAID Controller (512MB, RAID 0/1)
  - N8103-150 RAID Controller (512MB, RAID 0/1/5/6)
  - N8103-151 RAID Controller (1GB, RAID 0/1/5/6)
  - N8103-152 RAID Controller (1GB, RAID 0/1/5/6)
  - N8103-160 RAID Controller (1GB, RAID 0/1/5/6)
  - N8103-161 RAID Controller (1GB, RAID 0/1/5/6)
  - N8103-167 RAID Controller (1GB, RAID 0/1/5/6)
  - N8103-168 RAID Controller (1GB, RAID 0/1/5/6)
  - N8103-171 RAID Controller (0MB, RAID 0/1)
  - N8103-172 RAID Controller (512MB, RAID 0/1)
  - N8103-173 RAID Controller (512MB, RAID 0/1/5/6)
  - N8103-174 RAID Controller (1GB, RAID 0/1/5/6)
  - N8103-176 RAID Controller (1GB, RAID 0/1)
  - N8103-176A RAID Controller (1GB, RAID 0/1)
  - N8103-177 RAID Controller (1GB, RAID 0/1/5/6)
  - N8103-177A RAID Controller (1GB, RAID 0/1/5/6)
  - N8103-178 RAID Controller (2GB, RAID 0/1/5/6)
  - N8103-178A RAID Controller (2GB, RAID 0/1/5/6)
  - N8103-179 RAID Controller (2GB, RAID 0/1/5/6)
  - N8103-188 RAID Controller (0GB, RAID 0/1)
  - N8103-205 RAID Controller (0GB, RAID 0/1)
  - N8103-206 RAID Controller (2GB, RAID 0/1)
  - N8103-207 RAID Controller (2GB, RAID 0/1/5/6)
  - N8103-208 RAID Controller (4GB, RAID 0/1/5/6)
  - N8103-210 RAID Controller (2GB, RAID 0/1)
  - N8103-211 RAID Controller (2GB, RAID 0/1/5/6)
  - N8103-225 RAID Controller (4GB, RAID 0/1/5/6)
  - N8103-232 RAID Controller (RAID 0/1)
  - N8103-233 RAID Controller (2GB, RAID 0/1)
  - N8103-234 RAID Controller (2GB, RAID 0/1/5/6)
  - N8103-235 RAID Controller (2GB, RAID 0/1)
  - N8103-236 RAID Controller (2GB, RAID 0/1/5/6)
  - N8403-059 RAID Controller Kit(512MB, RAID 0/1)
  - N8404-007 Storage and I/O Blade AD106c


Carefully read the following user license agreement for NEC software
before using this software. 
If you do not agree to the terms of the agreement, do not download this 
software. By downloading this software, you agree to be bound by the terms
of the agreement.

[User license agreement for NEC software] 
This user license agreement is an agreement between you and NEC Corporation
(hereinafter called "NEC"). 
Under the following terms of this agreement, NEC grants you the right to
use the software program (hereinafter called "licensed program"), and you
are to agree to the terms. You are to take responsibilities for the choice, 
installation, or use of the licensed program, or the results of the usage
of the usage of the licensed program.

1. Term 
(1) This user license agreement goes into effect on the day you receive
    this software product. 
(2) You may terminate the right to use the licensed program under this
    license agreement at any time by giving NEC a month's or longer notice
    by letter. 
(3) NEC may terminate your right to use the licensed program at any time,
    if you fail to comply with the terms of this user license agreement. 
(4) Your right to use the licensed program continues to exist until it
    terminates in accordance with the provisions of this user license
    agreement. 
(5) When your right to use the licensed program terminates, all of your
    other rights under this user license agreement also terminate. You must
    destroy the licensed program, all the copies of the licensed program,
    and the related documents (e.g., manuals) provided with the licensed
    program as soon as your right to use the licensed program terminates. 

2. Use right 
You may use the licensed program only on NEC Express5800 servers using
Linux as follows.
    - Red Hat Enterprise Linux 7.1 - 7.9
    - Red Hat Enterprise Linux 8.2 - 8.4

3. Copy, alteration, and linkage of the licensed program 
(1) You may make a copy of the licensed program only to use it as a backup
    copy in case the program data is lost or destroyed. However, this is
    not the case if the licensed program is installed in fixed storage.
    In this case, you may keep it only to use in case the storage medium of
    the licensed program is lost or destroyed. 
(2) You must give the expressions of the copyright of the licensed program
    and other rights to all the copies of the licensed program. 
(3) Unless otherwise specified in this user license agreement, you may not
    use, copy, alter, or link the licensed program, you may not reproduce
    it in publications or networks, or you may not make your own decision
    on handling it in any other ways. 
(4) You may not copy the related documents (e.g., manuals) provided with
    the licensed program or reproduce them in publications or networks
    under any circumstances. 
(5) This user license agreement is not to transfer the intellectual
    property for the licensed program to you. 

4. Transfer of the licensed program 
(1) You may transfer all of your rights under this user license agreement
    only if satisfying all the following condition: 
(a) You are to transfer this user license agreement, the licensed program,
    all the copies of the licensed program, and the related documents
    (e.g., manuals) provided with the licensed program, and retain none of
    them. 
(b) The recipient agrees to the terms of this user license agreement. 
(2) Unless otherwise specified in this user license agreement, you may not
    loan or transfer the licensed program or the right to use it to a third
    party, or you may not make your own decision on handling it in any
    other ways. 

5. Decompilation 
You may not reverse engineer, decompile, or disassemble the licensed program. 

6. Term of a guarantee 
(1) NEC does not give any guarantee for the licensed program. You are to be
    liable and to pay for problems arising from the use of the licensed
    program. 
(2) Irrespective of the term (1), when NEC corrects licensed-program errors
    (bugs), NEC may, at its discretion, provide an error-corrected program,
    a program for correction (hereinafter called a modification program),
    or information for correction by an NEC-decided method. The modification
    program provided to you is regarded as the licensed program. 

7. No liability 
 NEC assumes no liability for your lost profit, damages arising from
 special circumstances (including damages which NEC can or could foresee),
 or damages you are asked for by any third party.

8. Others 
 Disputes over this user license agreement are to be settled at the Tokyo
 District Court as the exclusively agreed competent court.

---------------------------------------------------------------------------
[Installation Procedure]

Please extract the installation image and then start installation.
Refer to the "Universal RAID Utility User's Guide" which is contained
in the installation image for the detailed procedure of the installation.

 - User's Guide
  (1) Download the archive "uru60eug_compA.tar.gz".

  (2) Copy the archive to any directory in the server in which PDF files
      can be displayed.

  (3) The archive "uru60eug_compA.tar.gz" is in the tar.gz format. Log in
      by administrator, then unpack the archive.
      - Using Windows as Operating System
        Unpack "uru60eug_compA.tar.gz" by using archive manager.
      - Using Linux as Operating System
        Execute following command
          # tar zxvf uru60eug_compA.tar.gz

      After extracting the archive, the following files will appear.

      Universal RAID Utility User's Guide
      - uru60eug.pdf  - User's Guide
      - uru60euga.pdf - Appendix A : Glossary
      - uru60eugb.pdf - Appendix B : raidcmd Command Reference
      - uru60eugc.pdf - Appendix C : Logs/Events

 - Installation Image
  (1) Download the archive "076770-G01_637758760399189310.zip".

  (2) Copy the archive to any directory in the server in which this software
      will be installed.

  (3) The archive "076770-G01_637758760399189310.zip" is in the zip format.
      Log in by administrator, then unpack the archive.
      After extracting the archive, the following files will appear.

      Universal RAID Utility Ver6.0 Installation Image
        076770-G01_637758760399189310 directory
         - lnx_vm4 directory
           +- setup.sh - Universal RAID Utility setup script
           +- subsys.txt
           +- storelib-07.0503.0100.1000.i386.rpm - StoreLib package
           +- UniversalRaidUtility-6.0-0.i386.rpm - Universal RAID Utility package
           +- WebPAMPRO_Agent-3.15.0070-33.i386.rpm - WebPAMPRO Agent package
           +- transcfg
           +- transcfg.inf
           +- eci directory - Setup Program related modules
         - Universal RAID Utility Update Tool - for ExpressUpdate

  (4) To install this software, please refer to the section [Installation
      and Uninstallation] in "Universal RAID Utility User's Guide".

---------------------------------------------------------------------------
[General Notice]

1. The target Express5800 models and RAID Controllers for this software are
   different from those for Universal RAID Utility Ver2.36 and Ver4.02. If
   your system environment does not match any of the models and RAID
   Controllers shown in [Applicable model] and [Users] above, please use
   Universal RAID Utility Ver2.36 or Ver4.02.

2. The TCP ports Universal RAID Utility uses have been changed in Ver2.61 and
   the later versions as follows. 
       data port      - 52805(Ver2.6 and earlier) - 5016(Ver2.61 and later)
       event port     - 52806(Ver2.6 and earlier) - 5017(Ver2.61 and later)
       raidsrv Agent  - 52807(Ver2.6 and earlier) - 5018(Ver2.61 and later)

   The change has no effect on operations of Universal RAID Utility. 
   In the following cases, however, you must change the settings of Universal
   RAID Utility depending on your environment settings. Be sure to check the
   description in [TCP ports used by Universal RAID Utility] in the Universal
   RAID Utility User's Guide. 
   (1)  You customized the TCP ports Universal RAID Utility uses and you would
        like to continue using them, and/or
   (2)  You are going to update Universal RAID Utility from Ver2.6 or earlier
        versions to Ver2.61 or later versions using ExpressUpdate.

   Also you must change the settings of other applications in the following
   cases. Be sure to check the description in [TCP ports used by Universal
   RAID Utility] in the Universal RAID Utility User's Guide.
   (1)  You have specified the TCP port numbers Universal RAID Utility uses
        for the firewall settings, and/or
   (2)  Other applications in you environment have been using the TCP ports,
        5016, 5017, and 5018. 

3. Notes on use of function to Make/Remove Hot Spare by NEC ESMPRO Manager
   You can use this function only NEC ESMPRO Manager Ver. 5.72 or later.

4. Some symptoms occur when you monitor RAID Controllers using Universal RAID
   Utility.
   See the "URU_Notification_en.pdf" file attached to this page for details. 

---------------------------------------------------------------------------
[Revision History]

  2022/1/7  Ver6.0 Rev 3838
  First version released.
  "Enhancement"
     1. Additional support of the applicable model
        - Express5800/T110k-S
        - Express5800/T110k
     2. Additional support of the following RAID Controllers
        - N8103-225 RAID Controller (4GB, RAID 0/1/5/6)
        - N8103-232 RAID Controller (RAID 0/1)
        - N8103-233 RAID Controller (2GB, RAID 0/1)
        - N8103-234 RAID Controller (2GB, RAID 0/1/5/6)
        - N8103-235 RAID Controller (2GB, RAID 0/1)
        - N8103-236 RAID Controller (2GB, RAID 0/1/5/6)
     3. Additional support of managed hardware
        - physical devices with NVMe interface

---------------------------------------------------------------------------
[Attached Files]

 size    date                filename
--------+-------------------+----------------------------------------------
34742914 2021-12-23 16:44:37 076770-G01_637758760399189310.zip
 3108777 2021-12-23 19:23:36 uru60eug_compA.tar.gz

You can check the integrity of the downloaded file by comparing the 
following values in the md5sum column and the MD5 checksums of the files 
you have downloaded. If the checksums do not match, it means an error 
occurred during download.

 md5sum                           filename
---------------------------------+-----------------------------------------
c3b96ec454bf977562c371c2e5e0fbb8  076770-G01_637758760399189310.zip
ef2f1636afb7e7fab34260344197852e  uru60eug_compA.tar.gz

---------------------------------------------------------------------------
[Trademarks and Copyright]

The copyright for this software is held by NEC.
* Linux is the registered trademark of Linus Torvalds in the U.S. and other
  countries.
* All other company and product names in this document are the registered 
  trademarks or trademarks of their respective owners.
---------------------------------------------------------------------------
   Copyright NEC Corporation 2007-2022