================================================================================ NEC Express5800/E120d-1 BMC firmware 00.09, SDR(Sensor Data Record) 00.10 (Online) ================================================================================ Software name : NEC Express5800/E120d-1 BMC firmware and SDR update module for Online Models : NEC Express5800/E120d-1 Operating System : This software supports the following OS - Microsoft(R) Windows Server(R) 2008 - Microsoft(R) Windows Server(R) 2008 R2 - Microsoft(R) Windows Server(R) 2012 - VMware ESX4 Target Users : See [Target Users for Update] below Type : BMC firmware ================================================================================ [ About the software ] This BMC Firmwaer and SDR update module (hereinafter called "the software") suppots the following functional enhancement in the NEC Express5800/E120d-1 models: - Fixed the issue that the retrying of SNMP alerting is only done to Alert Receiver 1 in case Alert Progress setting is configured as One Alert Receiver. - Fixed the issue that the encryption does not work on JRE7 environment even when Encryption of Remote KVM console in System Operation Configuration is enabled. - Fixed the SSH public key authentication failure. - Fixed the issue that it fails to restore the data of ECO Configuration which is backed up the initialized data. - Deleted the item of "Microcontroller State" at configuration of Alert. (SDR) Note: - To prevent a system failure, please read this document carefully and follow the procedure for successful update. Should your system malfunctions or is powered off due to an unplanned event during update (for example, power blackout or cutoff, lightning, and noise), the system may be damaged and fails to operate normally. In this case, any remedial measures shall be taken at your expense. - This software does not support virtualization environment. - To use for this software on Linux(R) OS environment, "OpenIPMI" package must have been installed and executed. - This software does not support an update of SDR depending on the kinds of CPU or Power Supply Unit. Please use an offline update module. - This software supports the ExpressUpdate. The BMC firmware update supports via both of Management Controller and ExpressUpdate Agent. The SDR update supports via ExpressUpdate Agent. -------------------------------------------------------------------------------- [ Target Users for Update ] This software is available for the users who use the following models with the following BMC firmware versions. - Models to update: 1. NEC Express5800/E120d-1 - BMC firmware and SDR revisions to update: - BMC firmware BMC Firmware Revision: 00.03 BMC Firmware Revision: 00.07 - SDR SDR Revision: 00.06 SDR Revision: 00.09 NOTE: If your BMC firmware revision are later than the above, you do not require the update(the latest revisions already include the functions to be added by the software). How to confirm your BMC Firmware and SDR revision: - By ESRAS Utility of NEC ESMPRO Agent (1) Run the ESRAS Utility. (2) Select the [Intelligent Platform Management Interface] sub menu. To confirm BMC Firmware version (3) Select the [Management controller information] sub menu. (4) Select the [Basbrd Mgmt Ctlr] sub menu. (5) The BMC firmware revision of your system will be displayed. To confirm SDR version (6) Select the [Senosr Data Record(SDR)] and the [Repository Information] sub menu. (7) The SDR version of your system will be displayed. - By BIOS Setup, to confirm your BMC Firmware and SDR revision: (1) Power on the system. (2) When the following message appears, press the F2 key to start the BIOS Setup Menu. "Press <F2> SETUP" (3) Using the arrow keys, move the cursor to [Server]. (4) Select the [System Management] sub menu and press the Enter key. (5) The software revisions of your system will be displayed. (6) After confirmation of the software revisions, press the ESC key and exit the [System Management] sub menu. (7) Move the cursor to [Exit], using the arrow keys. (8) Select [Exit Discarding Changes], and exit the BIOS Setup Menu. - By NEC ESMPRO Manager Ver.5, to confirm your BMC Firmware and SDR revision: (1) Run NEC ESMPRO Manager Ver.5 on remote PC. (2) After selecting the server, select the [Remote Control] tab. (3) Select the [IPMI Information] sub menu. To confirm BMC Firmware version (4) Select the [MC(Management Controller) Information] sub menu. (5) Select the [Basbrd Mgmt Ctlr] sub menu. (6) The BMC firmware revision of your system will be displayed. To confirm SDR version (7) Select the [SDR-Management Information] sub menu and press the Enter key. (8) The SDR version of your system will be displayed. - By EXPRESSSCOPE(R) Engine 3 Web Server function (1) Run EXPRESSSCOPE(R) Engine 3 Web Server function. (2) Select the [System] sub menu. (3) Select the [IPMI Information] sub menu. To confirm BMC Firmware version (4) Select the [MC] sub menu. (5) Select the [Primary FRU Device] sub menu. (6) The BMC Firmware revision of your system will be displayed. To confirm SDR version (7) Select the [SDR] sub menu. (8) Select LAST Record ID / Record Type : OEMSDR (9) The SDR version of your system will be displayed. -------------------------------------------------------------------------------- Please read the following User License Agreement ("Agreement") carefully. If you do not agree to the terms and conditions of this Agreement, you shall not download the Software. Downloading the Software indicates your acceptance of the terms and conditions of the Agreement. [User License Agreement] NEC Corporation ("NEC") grants you the right to use the software program ("Software") under the terms and conditions of this Agreement only in the country in which you acquired the Software. You shall agree to all provisions of this Agreement and assume responsibility for selection, installation, use and effect of the Software purchased for your desired effect. 1. Terms 1.1 This Agreement shall come into force on the date of your receipt of the Software. 1.2 You may terminate the license granted hereunder by notifying us in writing at least one month prior to the desired termination date. 1.3 NEC may terminate the license granted you hereunder at any time if you fail to comply with any terms and conditions of this Agreement. 1.4 The license to the Software shall remain in force until the license is terminated on the date set forth hereunder. 1.5 Upon termination of the license, other rights granted you hereunder shall also be terminated. You must destroy or dispose of the Software, any copies of the Software and manual and other materials provided with the Software. 2. Copyright 2.1 The Software shall solely be used in the NEC Express5800 servers and workstations. 2.2 NEC grants you the right to use the Software only in the country in which you acquired the Software in accordance with the conditions of the preceding paragraph. 3. Copying, altering, and combining of the Software 3.1 You may only make one copy of the Software solely for a backup purpose, provided, however, that the copy of the Software is loaded into permanent memory of the system. You may store the Software solely to prevent damages or loss of the memory media. 3.2 You shall place the copyright notice and other legends on each copy of the Software. 3.3 You may not use, copy, alter, combine, publish, reproduce the Software over the Internet, or otherwise dispose of the Software except as provided in this Agreement. 3.4 You may not copy, publish the manual or other related documentation provided with the Software, or reproduce such manual and documentation over the Internet. 3.5 No intangible property right to the Software shall be transferred to you. 4. Transfer 4.1 You may assign your rights granted hereunder to a third party only if all conditions below are satisfied: a. You shall assign and shall not retain this Agreement, the Software, all copies of the Software, or the manual or other related documentation provided with the Software. b. The transferee agrees to this Agreement. 4.2 You shall not sublicense, assign, transfer, or otherwise dispose of the Software or the right of use to any third party except as provided herein. 5. Reverse compile You may not reverse engineer, decompile, or otherwise disassemble the Software. 6. Limitation of warranties 6.1 The Software is provided "as is" without warranty of any kind. In no event shall NEC be liable with respect to any claim by you on account of or arising out of the use of the Software. 6.2 Notwithstanding the provisions of the preceding paragraph, in case NEC makes any bug-fix version to the Software, NEC will, at its expense, furnish you with such bug-fix version, update version, or information in relation to such bug-fix or update version both in the source code form and object code form, and such bug-fix version or update version shall be considered as the licensed Software. 7. No liability In no event shall NEC be liable for any indirect or consequential damages or loss of profit or damages based on any third party claim, even if NEC has been advised of the possibility of such damages. -------------------------------------------------------------------------------- [ Installation procedures ] Perform the following steps to extract the Software and update your BMC firmware. - How to extract: (1) Download update module to a desired directory. (2) Extract downloaded module to a desired directory. (3) The software and its installation procedures "README_EN_Online.TXT" will be extracted to that specified folder. - How to update: (1) Perform the steps of the readme file to update the BMC firmware and SDR. -------------------------------------------------------------------------------- [ Revision history ] 2013/03/22 BMCFW Revision 00.09, SDR Revision 00.10 - Fixed the issue that the retrying of SNMP alerting is only done to Alert Receiver 1 in case Alert Progress setting is configured as One Alert Receiver. - Fixed the issue that the encryption does not work on JRE7 environment even when Encryption of Remote KVM console in System Operation Configuration is enabled. - Fixed the SSH public key authentication failure. - Fixed the issue that it fails to restore the data of ECO Configuration which is backed up the initialized data. - Deleted the item of "Microcontroller State" at configuration of Alert. (SDR) 2012/11/15 BMCFW Revision 00.07, SDR Revision 00.09 - Changed to reboot management LAN port if management LAN port does not receive any packet for a certain period of time. - Improve the character-based remote console via command line interface of EXPRESSSCOPE Engine 3 to be enabled to accept mass input for example to copy and paste long text. - Improved the issue that the network functinon of EXPRESSSCOPE Engine 3 become unavailable by receiving Jumbo Frame Packet from Management LAN port. - Fixed the issue that BMC owner's events are not logged rarely after BMC clear configuration by the BMC configuration Utility. - Supported Java 7 for web server functions of EXPRESSSCOPE Engine 3. - Fixed the issue that the cursor of a Linux text mode is not displayed on the remote KVM console of EXPRESSSCOPE Engine 3. - Supported Widows Server 2012 (DCMI). - Improved the issue that active directory user who belongs multiple group may be aborted to log in EXPRESSSCOPE Engine 3. - Improved the internal user configuration for EXPRESSSCOPE Engine 3 to be disabled to change. - Supported Battery model. (BMCFW and SDR) 2012/10/26 BMCFW Revision 00.03, SDR Revision 00.06 - Initial release. -------------------------------------------------------------------------------- [ Legal notices (trademarks and copyrights) ] All contents on this software are the copyright of NEC Corporation or the third-party software developer. EXPRESSSCOPE is a registered trademark of NEC Corporation. Microsoft, Windows, Windows Server, Windows Vista, BitLocker are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Linux is either registered trademarks or trademarks of Linus Torvalds in the United States and/or other countries. Red Hat, RPM are either registered trademarks or trademarks of Red Hat, Inc. VMware is a registered trademark or trademark of VMware, Inc. in the United States and/or other jurisdictions. All other company names and product names mentioned herein are registered trademarks or trademarks of their respective owners. -------------------------------------------------------------------------------- Copyright NEC Corporation 2013 |