===========================================================================
Universal RAID Utility Ver2.61 (Windows Edition)
===========================================================================
[Software name ] Universal RAID Utility Ver2.61
[Registered name ] 421945-B01_635289338014270967.zip
uru26eug_compG.zip
[Copyright (C) ] NEC Corporation 2007-2014
[Applicable model] Express5800/53La
Express5800/GT110b
Express5800/R120a-1
Express5800/R120a-2
Express5800/R120b-1
Express5800/R120b-2
Express5800/R120d-1M
Express5800/R120d-2M
Express5800/R120d-1E
Express5800/R120d-2E
Express5800/T120a-M
Express5800/T120a-E
Express5800/T120b-M
Express5800/T120b-E
Express5800/T120d
Express5800/GT110d
Express5800/GT110d-S
Express5800/GT110e
Express5800/GT110e-S
Express5800/R110d-1E
Express5800/R110e-1E
Express5800/E110d-1
Express5800/iR120a-1E
Express5800/E120b-1
Express5800/E120d-1
Express5800/E120d-M
Express5800/R140b-4
Express5800/B110d
Express5800/B120a
Express5800/B120b
Express5800/B120a-d
Express5800/B120b-d
Express5800/B120b-h
Express5800/B120d
Express5800/B120d-h
[Users ] For users who will install following Windows on NEC
Express5800 series.
- Windows Server 2012
- Windows Server 2008 R2
- Windows Server 2008
- Windows Server 2003 R2
- Windows Server 2003 SP1 or later
- Windows 8
- Windows 7
- Windows Vista
- Windows XP Professional SP2 or later
- Windows XP Professional x64 Edition SP1 or later
- Windows Small Business Server 2011
[Software type ] Utility
[Creation method ] Windows Zip format
===========================================================================
[Software Introduction]
Universal RAID Utility (hereinafter called "this software") is RAID System
Management Utility for the following RAID Controllers.
<RAID Controllers>
- Onboard RAID Controller on NEC Express5800/53La, GT110e, GT110e-S,
R110d-1E, R110e-1E, E110d-1, B110d, B120a, B120b, B120d, B120d-h, R120a-1,
R120a-2, R120b-1, R120b-2, R120d-1E, R120d-2E,T120a-E, T120b-M, T120b-E,
T120d, GT110d, GT110d-S, iR120a-1E, E120b-1, E120d-1, GT110b
- Internal RAID Controller on NEC Express5800/R120a-1, R120a-2, T120a-M,
T120a-E
- N8103-109 RAID Controller (128 MB, RAID 0/1/5/6)
- N8103-115 RAID Controller (512 MB, RAID 0/1/5/6)
- N8103-116A RAID Controller (128 MB, RAID 0/1)
- N8103-G116A RAID Controller (128 MB, RAID 0/1)
- N8103-117A RAID Controller (128 MB, RAID 0/1/5/6)
- N8103-118A RAID Controller (256 MB, RAID 0/1/5/6)
- N8103-128 RAID Controller (128 MB, RAID 0/1)
- N8103-129 RAID Controller (256MB, RAID 0/1)
- N8103-130 RAID Controller (256MB, RAID 0/1/5/6)
- N8103-134 RAID Controller (512MB, RAID 0/1/5/6)
- N8103-135 RAID Controller (512MB, RAID 0/1/5/6)
- N8103-149 RAID Controller (512MB, RAID 0/1)
- N8103-150 RAID Controller (512MB, RAID 0/1/5/6)
- N8103-151 RAID Controller (1GB, RAID 0/1/5/6)
- N8103-152 RAID Controller (1GB, RAID 0/1/5/6)
- N8103-160 RAID Controller (1GB, RAID 0/1/5/6)
- N8103-167 RAID Controller (1GB, RAID 0/1/5/6)
- N8403-026 RAID Controller
- N8403-027 SATA Interface Card(When using for RAID System)
- N8403-059 RAID Controller Kit(512MB, RAID 0/1)
- N8404-001 Storage and I/O Blade AD106a
- N8404-003 Storage and I/O Blade AD106b
The TCP ports Universal RAID Utility uses have been changed in Ver2.61 Rev 2459.
See No. 5 in the General Notices on this page for details.
Carefully read the following user license agreement for NEC software
before using this software.
If you do not agree to the terms of the agreement, do not download this
software. By downloading this software, you agree to be bound by the terms
of the agreement.
[User license agreement for NEC software]
This user license agreement is an agreement between you and NEC Corporation
(hereinafter called "NEC").
Under the following terms of this agreement, NEC grants you the right to
use the software program (hereinafter called "licensed program"), and you
are to agree to the terms. You are to take responsibilities for the choice,
installation, or use of the licensed program, or the results of the usage
of the usage of the licensed program.
1. Term
(1) This user license agreement goes into effect on the day you receive
this software product.
(2) You may terminate the right to use the licensed program under this
license agreement at any time by giving NEC a month's or longer notice
by letter.
(3) NEC may terminate your right to use the licensed program at any time,
if you fail to comply with the terms of this user license agreement.
(4) Your right to use the licensed program continues to exist until it
terminates in accordance with the provisions of this user license
agreement.
(5) When your right to use the licensed program terminates, all of your
other rights under this user license agreement also terminate. You must
destroy the licensed program, all the copies of the licensed program,
and the related documents (e.g., manuals) provided with the licensed
program as soon as your right to use the licensed program terminates.
2. Use right
You may use the licensed program only on NEC Express5800 servers using Windows
as follows.
- Windows Server 2012
- Windows Server 2008 R2
- Windows Server 2008
- Windows Server 2003 R2
- Windows Server 2003 SP1 or later
- Windows 8
- Windows 7
- Windows Vista
- Windows XP Professional SP2 or later
- Windows XP Professional x64 Edition SP1 or later
- Windows Small Business Server 2011
3. Copy, alteration, and linkage of the licensed program
(1) You may make a copy of the licensed program only to use it as a backup
copy in case the program data is lost or destroyed. However, this is
not the case if the licensed program is installed in fixed storage.
In this case, you may keep it only to use in case the storage medium of
the licensed program is lost or destroyed.
(2) You must give the expressions of the copyright of the licensed program
and other rights to all the copies of the licensed program.
(3) Unless otherwise specified in this user license agreement, you may not
use, copy, alter, or link the licensed program, you may not reproduce
it in publications or networks, or you may not make your own decision
on handling it in any other ways.
(4) You may not copy the related documents (e.g., manuals) provided with
the licensed program or reproduce them in publications or networks
under any circumstances.
(5) This user license agreement is not to transfer the intellectual
property for the licensed program to you.
4. Transfer of the licensed program
(1) You may transfer all of your rights under this user license agreement
only if satisfying all the following condition:
(a) You are to transfer this user license agreement, the licensed program,
all the copies of the licensed program, and the related documents
(e.g., manuals) provided with the licensed program, and retain none of
them.
(b) The recipient agrees to the terms of this user license agreement.
(2) Unless otherwise specified in this user license agreement, you may not
loan or transfer the licensed program or the right to use it to a third
party, or you may not make your own decision on handling it in any
other ways.
5. Decompilation
You may not reverse engineer, decompile, or disassemble the licensed program.
6. Term of a guarantee
(1) NEC does not give any guarantee for the licensed program. You are to be
liable and to pay for problems arising from the use of the licensed
program.
(2) Irrespective of the term (1), when NEC corrects licensed-program errors
(bugs), NEC may, at its discretion, provide an error-corrected program,
a program for correction (hereinafter called a modification program),
or information for correction by an NEC-decided method. The modification
program provided to you is regarded as the licensed program.
7. No liability
NEC assumes no liability for your lost profit, damages arising from
special circumstances (including damages which NEC can or could foresee),
or damages you are asked for by any third party.
8. Others
Disputes over this user license agreement are to be settled at the Tokyo
District Court as the exclusively agreed competent court.
---------------------------------------------------------------------------
[Installation Procedure]
Please extract the installation image and then start installation.
Refer to the "Universal RAID Utility User's Guide" which is contained in
the installation image for the detailed procedure of the installation.
(1) Download the archives "421945-B01_635289338014270967.zip" and
"uru26eug_compG.zip".
(2) Copy the archives to any folder in the server in which this software
will be installed.
(3) The archives "421945-B01_635289338014270967.zip" and "uru26eug_compG.zip"
are in the Windows ZIP format.
After extracting the archives, the following files will appear.
- Universal RAID Utility Ver2.61 Installation Image
421945-B01_635289338014270967 folder
- windows folder
- Setup.exe - Universal RAID Utility Setup Program
- eci folder - Setup Program related modules
- Universal RAID Utility Update Tool - for ExpressUpdate
- Universal RAID Utility User's Guide
- uru26eug.pdf - User's Guide
- uru26euga.pdf - Appendix A : Glossary
- uru26eugb.pdf - Appendix B : raidcmd Command Reference
- uru26eugc.pdf - Appendix C : Logs/Events
(4) To install this software, please refer to the section [Installation
and Uninstallation] in "Universal RAID Utility User's Guide".
---------------------------------------------------------------------------
[General Notice]
1. The target Express5800 models and RAID Controllers for this software are
different from those for Universal RAID Utility Ver2.33. If your system
environment does not match any of the models and RAID Controllers shown
in [Applicable model] and [Users] above, please use Universal RAID Utility
Ver2.33.
2. The RAID Viewer and the Log Viewer are not available in Windows Server
2008 or Windows Server 2008 R2 or Windows Server 2012 Server Core.
Use raidcmd with the administrative right.
3. About support of Solid State Drive(SSD)
To display the Solid State Drive correctly in the environment where
the onboard RAID Controllers (LSI Embedded MegaRAID) are used, you
need the driver ver14.00.1026 or later which supports the Solid State
Drive.
Please check if the version of driver is 14.00.1026 or later.
4. The maximum number of IP addresses on OS that can be enabled in the
computer is 42.
Universal RAID Utility cannot communicate with NEC ESMPRO Manager if more
than 42 IP addresses are set enabled.
5. The TCP ports Universal RAID Utility uses have been changed in Ver2.61 and
the later versions as follows.
data port - 52805(Ver2.6 and earlier) - 5016(Ver2.61 and later)
event port - 52806(Ver2.6 and earlier) - 5017(Ver2.61 and later)
raidsrv Agent - 52807(Ver2.6 and earlier) - 5018(Ver2.61 and later)
The change has no effect on operations of Universal RAID Utility.
In the following cases, however, you must change the settings of Universal
RAID Utility depending on your environment settings. Be sure to check the
description in [TCP ports used by Universal RAID Utility] in the Universal
RAID Utility User's Guide.
(1) You customized the TCP ports Universal RAID Utility uses and you would
like to continue using them, and/or
(2) You are going to update Universal RAID Utility from Ver2.6 or earlier
versions to Ver2.61 or later versions using ExpressUpdate.
Also you must change the settings of other applications in the following
cases. Be sure to check the description in [TCP ports used by Universal
RAID Utility] in the Universal RAID Utility User's Guide.
(1) You have specified the TCP port numbers Universal RAID Utility uses
for the firewall settings, and/or
(2) Other applications in you environment have been using the TCP ports,
5016, 5017, and 5018.
---------------------------------------------------------------------------
[Revision History]
2014/3/4 Ver2.61 Rev 2459
"Enhancement"
1. Correction of supporting applicable model and RAID Controllers
2013/1/31 Ver2.61 Rev 2459
"Enhancement"
1. Additional support of the applicable model
- Express5800/E120d-1
- Express5800/E120d-M
"Change"
1. Change of the TCP ports Universal RAID Utility uses
See No.5 of the General Notices in the document.
2012/11/30 Ver2.6 Rev 2425
"Enhancement"
1. Additional support of the following OS
- Windows Server 2012
"Improvement"
1. Bug Fix: An event of 'OS fatal error" may be registered although no
error actually occurs.
2012/10/31 Ver2.6 Rev 2397
"Enhancement"
1. Additional support of the following RAID Controllers
- N8103-152 RAID Controller (1GB, RAID 0/1/5/6)
- N8103-167 RAID Controller (1GB, RAID 0/1/5/6)
2. Additional support of the following OS
- Windows 8
3. Support of the Flash Backup Unit
4. Support of select function for installing GUI modules and NEC ESMPRO
Manager Communication Module
5. Addition of the function to check if any programs that prevent
Universal RAID Utility from being uninstalled have started
"Improvement"
1. Improvement that enables you to use RAID Viewer without installing
Microsoft Visual C++ Library Runtime Component
2. Bug fix: No events are notified in rare cases.
3. Bug fix: Operation may be done to the Physical Device not exist when
you specify wrong Physical Device.
2012/8/31 Ver2.5 Rev 2343
"Improvement"
1. Security fix for vulnerability issue that RAID management can be done
remotely due to the problem on URU intra-module connection.
"Enhancement"
1. Additional support of the applicable model
- Express5800/R120d-1E
- Express5800/R120d-2E
- Express5800/T120d
- Express5800/GT110e
- Express5800/GT110e-S
- Express5800/R110e-1E
- Express5800/B110d
- Express5800/B120d
- Express5800/B120d-h
2012/4/6 Ver2.5 Rev 2244
"Enhancement"
1. Additional support of the following RAID Controllers
- N8103-149 RAID Controller (512MB, RAID 0/1)
- N8103-150 RAID Controller (512MB, RAID 0/1/5/6)
- N8103-151 RAID Controller (1GB, RAID 0/1/5/6)
- N8103-160 RAID Controller (1GB, RAID 0/1/5/6)
2. Additional support of the applicable model
- Express5800/GT110d
- Express5800/GT110d-S
- Express5800/R110d-1E
- Express5800/E110d-1
- Express5800/R120d-1M
- Express5800/R120d-2M
3. Additional support of the following OS
- Windows Small Business Server 2011
4. Support of the Premium Feature of RAID Controller
You can use the CacheCade function to create the SSD Cache Drive
using the Solid State Drive(s).
5. Support of HDD Power Saving function
The HDD Power Saving reduces power consumption of the system by
spinning down the Hot Spares that are not in use.
6. Addition of the Refresh Battery function
Universal RAID Utility Ver2.5 supports refreshing the battery
connected to the RAID Controller.
7. Support of ExpressUpdate
This feature enables you to install, update or uninstall Universal
RAID Utility from NEC ESMPRO Manager remotely.
8. Changing the policy of Physical Device number to be managed by
Universal RAID Utility
From Ver2.5, the policy has been changed that the Physical Device
number is assigned based on the enclosure number and slot number.
9. raidcmd Tree View
Universal RAID Utility Ver2.5 supports the function that can
display the RAID system configuration in a tree view using raidcmd.
10. Support of the Logical Drive with the level of RAID 60
Universal RAID Utility Ver2.5 supports the display, operation,
and deletion of the RAID 60 Logical Drive
11. Enhancement of the Physical Device Monitoring
The events indicating "Physical Device Warning Error" and "Physical
Device Fatal Error" are available when a specific error of Physical
Devices is detected.
12. Fatal FW Error
Universal RAID Utility Ver2.5 monitors the event of the fatal FW
Error that is detected by the RAID Controller. The event is notified
at the start of Universal RAID Utility when a fatal FW error occurs
and the system is down.
13. Support of RAID System management by NEC ESMPRO Manager Ver. 5.5
or later
Universal RAID Utility Ver2.4 has supported RAID System management
and monitoring with NEC ESMPRO Manager Ver 5.3 or later versions.
Universal RAID Utility Ver2.5 supports NEC ESMPRO Manager Ver5.5 or
later versions.
2011/4/6 Ver2.4 Rev 1582
"Enhancement"
1. Additional support of the following OS
- Windows Server 2008 R2 SP1
- Windows 7 SP1
2. Support of fault monitoring of Hot Spare
When Hot Spare is Failed, Universal RAID Utility notifies several
logs of the event "Physical Device is Failed."
"Changes"
1. Change of term of running mode
2. Change of the version of NEC ESMPRO Manager which supports the
function of RAID System management
Universal RAID Utility Ver2.31 supports NEC ESMPRO Manager Ver. 4.0
or later. Universal RAID Utility Ver2.4 supports NEC ESMPRO Manager
Ver. 5.3 or later.
"Improvement"
1. Improvement of Make Online / Make Offline
When you execute Make Online / Make Offline, Universal RAID Utility
displays a warning message in order not to corrupt the system by
mistake.
"General Notice"
1. Removal of the following Note on Use of Universal RAID Utility in
User's Guide
- "Patrol Read"
2011/2/14 Ver2.31 Rev 1492
* Note that there is no change in the installation image.
The changes described below are related to only the expansion of the
range of the support.
"Enhancement"
1. Additional support of new Solid State Drive(SSD)
2. Replacement of the User's Guide
The User's Guide in the archive was replaced to the latest edition.
2010/10/27 Ver2.31 Rev 1492
"Enhancement"
1. Additional support of the following RAID Controllers
- N8103-128 RAID Controller (128 MB, RAID 0/1)
2. Additional support of the applicable model
- Express5800/E120b-1
3.Expansion of support range
- The models and RAID Controllers that have been managed only by
Universal RAID Utility Ver2.3 are now available with Ver2.31.
2010/7/30 Ver2.31 Rev 1492
"General Notice"
1. Addition of General Notice
General Notice (4) is added.
2. Addition of Notes on Use of Universal RAID Utility in User's Guide
"Patrol Read" is added.
"Enhancement"
1. Additional support of applicable model
- Express5800/R120b-1
- Express5800/R120b-2
- Express5800/T120b-M
- Express5800/T120b-E
"Changes"
1. Change of the method to identify Solid State Drive (SSD)
The internal method to identify a Solid State Drive and Hard Disk
Drive has been changed so that it is independent on the model of
physical device.
2. Change of measures to monitor battery of N8103-134/135 RAID
Controllers
The method to check the health of the battery of N8103-134/135
RAID Controllers has been changed so that it is determined based
on the remaining capacity of battery.
"Improvement"
1. Improvement of Easy Configuration
Even if making more than 3 Hot Spares with Easy Configuration from
raidcmd, the error does not occur.
2010/6/30 Ver2.30 Rev 1447
"General Notice"
1. The following General Notice are removed
- Update for URU Ver2.0, 2.01, 2.02, or 2.03
- Installation path
2. Addition of General Notice
General Notice (2) and (3) are added.
"Enhancement"
1. Additional support of the following RAID Controllers
- N8103-129 RAID Controller (256MB, RAID 0/1)
- N8103-130 RAID Controller (256MB, RAID 0/1/5/6)
- N8103-134 RAID Controller (512MB, RAID 0/1/5/6)
- N8103-135 RAID Controller (512MB, RAID 0/1/5/6)
2. Additional support of applicable model
- Express5800/R140b-4
- Express5800/B120b
- Express5800/B120b-d
"Changes"
1. Change registration policy of Physical Device Warning
Even if command timeout or Physical Device reset occurs, Universal
RAID Utility does not register Physical Device Warning from this
version.
"Bug Fixes"
1. When using N8103-109 RAID Controller (128MB, RAID 0/1/5/6), it
takes URU about 10 times as long to complete full-initialize as
SuperBuildUtility does.
2. You cannot initialize or delete Logical Drive(s) when using N8103-109
RAID Controller (128MB, RAID 0/1/5/6) and USB Flash disk at the
same time.
2010/1/28 Ver2.11 Rev 1297
"General Notice"
1. Addition of General Notice
General Notice (2) and (3) are added.
2009/10/30 Ver2.11 Rev 1297
"Enhancement"
1. Additional support of new Solid State Drive(SSD)
2009/9/30 Ver2.11 Rev 1297
"Enhancements"
1. Additional support of the following OS
- Windows Server 2008 R2
- Windows 7
2. Support of the remote management of RAID System using NEC ESMPRO
Manager Ver. 5.2 or later
Universal RAID Utility (Windows Edition) can manage the RAID System
using NEC ESMPRO Manager Ver. 5.2 or later. The RAID System that
exists in a remote environment can be managed by using NEC ESMPRO
Manager. Refer to "Management of RAID System using NEC ESMPRO
Manager" for detail.
2.1 Browsing the information of RAID System
- The information of RAID System can be browsed as a tree view
by using Data Viewer, the same as RAID Viewer.
- The property information of RAID Controller, Battery, Logical
Drive, Physical Device and Disk Array can be browsed.
2.2 Maintenance of RAID System
- The operations such as Consistency Check, Rebuild and Initialize
can be run.
- The maintenance functions such as Locate(Lamp), Make Online
and Make Offline can be used.
- The parameters such as priority of some operations and Cache
Mode of Logical Drive can be changed.
2.3 Monitoring of RAID System
- The state of RAID System can be seen at a glance by displaying
the icon and status on Data Viewer.
- The event occurred on the RAID System can be received as alert
on Alert Viewer.
- The RAID Log similar to Log Viewer can be browsed on Data Viewer.
3. Operation
The function to start Consistency Check to all Logical Drives is added
raidcmd can start Consistency Check following Logical Drives at a time.
- All Logical Drives of all RAID Controllers
- All Logical Drives of a RAID Controller
"Changes"
1. Setup Program of Universal RAID Utility
Setup Program does not check whether or not to install Microsoft
.NET Framework and Microsoft Visual C++ 2005 SP1 library.
2. Display of information
The status definition of RAID Controller made by Promise is changed
When a broken physical device is replaced with a hot spare because
of hot swap rebuilding, etc., and no longer a member of the logical
drive, Universal RAID Utility Ver2.01 has changed the state of the
Physical Device into "Ready."
Universal RAID Utility Ver2.11 changes the state of the Physical
Device into "Failed."
3. Log/Event
Changing the policy of event logging to RAID Log
- The event of changing Cache Mode of Logical Drive changed by RAID
Viewer and raidcmd is not registered in RAID Log as an event.
- The "Degraded" event of Logical Drive that RAID level is 6 is
registered to RAID Log when one Physical Device becomes "Failed"
and also when two Physical Devices become "Failed."
- Improved the error detection condition for "Temperature Fatal" of
an Enclosure.
[Attached Files]
size date filename
--------+-------------------+----------------------------------------------
36622799 2014-02-25 14:06:44 421945-B01_635289338014270967.zip
3004525 2014-02-20 12:57:01 uru26eug_compG.zip
You can check the integrity of the downloaded file by comparing the
following values in the md5sum column and the MD5 checksums of the files
you have downloaded. If the checksums do not match, it means an error
occurred during download.
md5sum filename
---------------------------------+-----------------------------------------
2cafc5a13c3048d50085db7a3057306a 421945-B01_635289338014270967.zip
a48436f7f394a283da54aeb181a3d3ed uru26eug_compG.zip
- 421945-B01_635289338014270967.zip
date size filename
------------------+----------------+---------------------------------
2014/02/25 10:33 10,871 readme_jp.txt
2011/05/13 20:11 509 setup.iss
2014/02/25 14:05 146 ExUpHash.xml
2014/02/25 14:05 25,053 ExUpInfo.xml
2011/05/09 11:09 37 uruSetup.bat
2014/02/25 10:32 10,895 readme_en.txt
2012/08/17 16:17 10,641 uruSetup.js
2012/11/20 11:18 12,841,336 windows/Setup.exe
2012/07/04 16:07 8,192 windows/eci/1033.mst
2009/04/02 13:10 318 windows/eci/setup.iss
2012/07/04 16:07 2,243,406 windows/eci/ISSetup.dll
2012/07/04 16:07 328,704 windows/eci/ExpressUpdate Agent.msi
2009/04/07 11:19 197 windows/eci/update.iss
2012/07/04 16:07 4,203,020 windows/eci/Data1.cab
2012/07/04 16:07 36,352 windows/eci/1041.mst
2012/07/04 16:07 2,330,422 windows/eci/setup.exe
2009/09/11 13:51 3,919,945 windows/eci/src/libiconv-1.9.2.tar.gz
2012/06/01 17:46 8,247,659 windows/eci/src/axis2c-src-1.6.0.zip
2012/06/01 22:10 1,172 windows/eci/src/axis2c-src-1.6.0.patch
2012/06/01 22:17 58,228 windows/eci/src/openslp-2.0.beta1.patch
2012/06/01 18:06 381 windows/eci/src/readme.txt
2012/06/01 18:01 5,642,684 windows/eci/src/openslp-2.0.beta1.zip
2012/06/01 18:02 45 windows/eci/src/revision.txt
2008/05/27 11:41 6,406 windows/eci/doc/OpenSSL_license.txt
2009/09/11 11:54 1,249 windows/eci/doc/zlib_license.txt
2008/03/27 08:27 1,686 windows/eci/doc/OpenSLP_license.txt
2009/10/08 20:07 568 windows/eci/doc/ApacheNotice.txt
2009/09/11 10:43 3,458 windows/eci/doc/OpenSLP_EULA.txt
2009/09/11 11:51 1,162 windows/eci/doc/MIT_license.txt
2009/09/11 10:24 2,244 windows/eci/doc/OpenSSL_WOILA.txt
2007/09/26 16:26 11,560 windows/eci/doc/ApacheLicense_v2.txt
1999/12/31 21:50 25,283 windows/eci/doc/LGPL_v2.txt
- uru26eug_compG.zip
date size filename
------------------+----------------+---------------------------------
2014/01/16 10:09 2,814,476 uru26eug.pdf
2012/09/13 15:35 67,177 uru26euga.pdf
2013/01/16 16:39 179,506 uru26eugb.pdf
2012/11/21 14:20 153,727 uru26eugc.pdf
---------------------------------------------------------------------------
[Trademarks and Copyright]
The copyright for this software is held by NEC.
*Microsoft, Windows and Windows Server are either registered trademarks or
trademarks of Microsoft Corporation in the United States and/or other
countries.
*All other company and product names in this document are the registered
trademarks or trademarks of their respective owners.
---------------------------------------------------------------------------
Copyright NEC Corporation 2007-2014