*The renewal contents.

 * NEC ESMPRO ServerAgentService Ver1.25

  - The problem about the memory number in the event message of a memory
    error is corrected.
      Source   : ESMCommonService
      Event ID : 2304, 2307

  - When environment variable EsmDir included a blank, 
    the problem of failing in execution of a HTTPS automatic setting tool 
    is corrected.

  - The following problem was corrected. 
    In the Alert Manager, "source name : ESMStorageService" wasn't shown to
    "event log - system". And the following event (SATA-HDD (SSD) 
    S.M.A.R.T. Error) wasn't express reported.
      Source   : ESMStorageService
      Event ID : 1001



 * NEC ESMPRO ServerAgentService Ver1.24

  - It's corrected so as not to show "critical error log registration"
    to a report destination of an event tree in the alert viewer.

  - A new event "Secure Boot Authentication Failed." was added.
      Source   : ESMCommonService
      Event ID : 3061

  - Collect was updated.
      - A collected logfile was added.
        (C:\KAOATO\KaoatoLogCollection)

  - For firmware version is "0171" or later for 800GB Non-Hot Plug 2.5-inch
    PCIe SSD (N8118-500), fixed the problem that can not be properly monitor
    the life state.



 * NEC ESMPRO ServerAgentService Ver1.23

  - Collect was updated.
    - A collected event log is added.
      (VHDMP.EVTX)
    - A collected logfile is added.
      (%windir%\INTELLAN)



 * NEC ESMPRO ServerAgentService Ver1.22

  - When each information collection of Collect couldn't be completed 
    within 10 minutes, it's changed so that the processing might be aborted.

  - The problem that a wrong file size is recorded by Collect log
    (filedata.csv) is corrected.

  - The log output contents of Collect log (Errorinf.log) were changed.

  - The problem that event log of an application pop-up is registered
    when system is doing a shutdown is corrected.

  - Dumped data of hardware log (SEL) is added to the event message of
    sensor fault.
      Source   : ESMCommonService
      Event ID : 1900, 1901, 1902

  - The problem that the precision of the CPU load factor falls in case of 
    non-service mode is corrected.

  - It was changed so that the WMI provider of NEC ESMPRO ServerAgentService
    may run in the process different from the WMI provider of other products.

  - The DLL hijacking vulnerability is corrected.

  - Improved as storage monitoring and file system monitoring function
    is to continue the data file access exception when also monitoring
    to be used.



 * NEC ESMPRO ServerAgentService Ver1.21

  - none.



 * NEC ESMPRO ServerAgentService Ver1.2

  - Memory usage monitoring is supported.

  - PCIeSSD Monitoring is supported.

  - Fixed a problem that a monitoring module is likely to stop in case of
    continuous operation.

  - It's corrected that a certificate may be made by SHA256 algorithm at
    the time of certificate making in makecert.exe of a HTTPS setting 
    tool (ESMHttps.bat).

  - Fixed on the NEC ESMPRO ServerAgentService storage and file system
    monitoring.
    - Processing of the time of management file injustice is improved.

  - Correction of Collect.
    - WMI information extraction of a memory amount of consumption watch.
    - Log extraction for SSD monitorin provider inner operations checks.



 * NEC ESMPRO ServerAgentService Ver1.1

  - CPU/Memory Fallback monitoring is supported.

  - A certificate can be made by a HTTPS setting tool (ESMHttps.bat).

  - The problem that wrong indication of status and report sometimes occur
    at the time of threshold value change is corrected about a CPU load
    monitoring system.

  - The report level of the event of "Chassis Intrusion"
    (source name :ESMCommonService and event ID:1002) is changed to
    "warning" from "information".

  - The product name in the event message to register at the time of
    shut down is corrected.  

  - The problem that CIM Indication cannot be sent at the time of 
    SQL Server coexistence is corrected.
 


 * NEC ESMPRO ServerAgentService Ver1.05

  - Fixed the following problem when it is updated to NEC ESMPRO 
    ServerAgentService Ver. 1.04. If NEC ESMPRO ServerAgentService's
    install destination folder was changed from default folder (C:\ESM) 
    into others, the storage information on NEC ESMPRO Manager does not 
    display correctly.

  - The problem which the following log is registered in system event log
    is corrected.
      Source   : ESMCommonService
      Event ID : 9108
      Level    : Error
      Description : An unexpected exception occurred during the provider
                    operation.
                    The monitoring will be stopped. Provider (ESM_Processor)

  - The problem which the memory usage of WmiPrvSE.exe increases
    about 5 KB at the time of CIM-Indication report is corrected.



 * NEC ESMPRO ServerAgentService Ver1.04

  - The problem of sometimes reading beyond reserved memory 
    when ESM System Management Service (esmsmsrv.exe) starts is corrected.

    [Note]
      When using a page heap setting tool (Gflags tool and Pageheap tool of
      Microsoft), this problem is tangible.

  - Fixed on the NEC ESMPRO ServerAgentService storage and file system
    monitoring.

    - Fixed an issue where the configuration of the server where you 
      installed NEC ESMPRO ServerAgentService even though not changed, 
      NEC ESMPRO Manager displays "Constitution information has changed".
       + For NEC ESMPRO ServerAgentService Ver. 1.01

    - Fixed an issue that ESMCommonService's warning and error event will be 
      registered in the log (monitoring thread reboot) in an environment 
      where the N8103-142 or N8013-184 SAS controller is used on Windows 
      Server 2008 R1 (x86).
       + For NEC ESMPRO ServerAgentService Ver. 1.01, 1.02