NEC ESMPRO ServerAgentService for Linux
  Change-Tool to "Shutdown" or "None" when detecting
  the threshold temperature lower critical
[ Software name   ]  NEC ESMPRO ServerAgentService Ver.2.0 for Linux
[ Registered name ]  lnx_esmsas_TempLowCrtAction.zip
[ Copyright (C)   ]  NEC Corporation 2018
[ Target          ]  See below
[ Software type   ]  Shell script
[ Creation method ]  ZIP file format
[ File size       ]  2,695 bytes
[ MD5             ]  fe8071b7675dccb1da443df5190b09b7

NEC ESMPRO ServerAgentService has an automatic shutdown function when
it detect lower critical temperature. This tool helps you to enable or 
disable this function.

When it's necessary to invalidate this automatic shutdown function 
according to the customer's operating policy, the setting can be 
changed by execution or a change procedure of the tool which is being 
exhibited by this page.
When there are no problems by the present setting, it isn't necessary 
to carry out this patch.

Target Models, Target OS, Target NEC ESMPRO ServerAgentService
Target models and operating system, NEC ESMPRO ServerAgentService are 
as follows.

  - Models: BMC support model
        NEC Express5800/T110h
        NEC Express5800/T110i
        NEC Express5800/T120g
        NEC Express5800/R110h-1
        NEC Express5800/R110i-1
        NEC Express5800/R120g-1E
        NEC Express5800/R120g-1M
        NEC Express5800/R120g-2E
        NEC Express5800/R120g-2M
      Server Blade
        NEC Express5800/B120g-h
      Scalable Enterprise Server
        NEC Express5800/A2040e, A1040e
        NEC Express5800/A2040d, A2020d, A2010d, A1040d 
        NEC Express5800/D120h

  - Operating System:
      Red Hat Enterprise Linux 7.3 or later
      Red Hat Enterprise Linux 6.7 or later

  - NEC ESMPRO ServerAgentService:
      version 2.0.6-0 or earlier

    Execute the following commands, confirm which mode NEC ESMPRO 
    ServerAgentService is installed with.
      # rpm -qa | grep Esmpro-Provider

    When Esmpro-Provider package was displayed, it's installed.
      Esmpro-Provider-"Version Information"

User license agreement for NEC software
  This user license agreement is an agreement between you and the NEC 
  Corporation (hereinafter referred to as NEC). Under the following 
  terms of agreement, NEC grants you the right to utilize this 
  software program (hereinafter referred to as "licensed program"), 
  but the customer will be bound to these to the terms.
  NEC will not be held liable for the use, installation, or the 
  results of the use of the licensed program. In addition, the source 
  code that GNU Lesser General Public License (LGPL) or Berkeley 
  Software Distribution License (BSD) was applied to obeys an 
  agreement of LGPL.

  1) Terms
    (1) This user license agreement takes effect from the day the 
        software product is received by the user.
    (2) You may terminate your rights to use the licensed program 
        under this user license agreement at any time, by notifying 
        NEC, in writing, at least one month or longer prior to the 
        requested date of termination.
    (3) NEC reserves the right to terminate this license agreement 
        if you violate any of the provisions in this agreement.
    (4) Your rights to use the licensed program will continue until 
        it is terminated in accordance with the provisions stated in 
        this license agreement.
    (5) If the agreement is terminated for any reason by either 
        party, you are required to destroy the software, copies of 
        the software and its manuals and media, or return them to 
        NEC immediately.

  2) Usage right
     You may use the licensed program only on NEC Express5800 servers 
     using your Linux OS.

  3) Copying, altering, and combining of the licensed program
    (1) You are granted the permission to create on copy of the 
        licensed program to use as a backup in case the program data 
        becomes lost, damaged or destroyed.
        Once the licensed program is loaded into memory on a PC, a 
        copy of the program may be stored only as backup incase the 
        fixed memory of the PC becomes damaged or lost.
    (2) The copyrights and license agreement must be attached to all 
        copies of the licensed program.
    (3) Unless otherwise specified in this user license agreement, 
        you may not use, copy, alter the licensed program or combine 
        it with another module. It may not reproduced in any 
        publications or networks. The handling of the licensed 
        program and/or documents must strictly follow the terms and 
        conditions of this license agreement, and at no time shall it 
        be handled in any other terms.
    (4) All related documents (e.g., manuals) provided with the 
        licensed program may not be copied, altered or reproduced in 
        any publications or networks, under any circumstances.
    (5) This user license agreement does not transfer the 
        intellectual property of the licensed program to the user.

  4) Transfer of the licensed program
    (1) All rights of this license agreement may be transferred to 
        another party ONLY when the following conditions are 
        (a) All materials including the licensed program, all copies 
            of the licensed program, this license agreement, and all 
            other related documents are transferred to the other 
            party, and no material concerning the licensed program is 
            retained by you.
        (b) The recipient party agrees to conform to the terms of 
            this user license agreement.
    (2) Unless otherwise specified in this user license agreement, 
        the licensed program or rights for its use may not be 
        transferred to a third party.
        All matters concerning the transferring of the rights and 
        program must strictly follow the terms and conditions 
        included in this license agreement.

  5) Decompilation
     You may not reverse engineer, decompile, or disassemble the 
     licensed program.

  6) Term of a guarantee
    (1) NEC makes no warranties, expressed or implied concerning this 
        licensed program, and will at no time, be held liable to pay 
        for any expenses which may be incurred, should a problem 
        result from the use of the licensed program.
    (2) Regardless of the terms stated above in term (1), upon 
        correction of the licensed program errors (bugs), NEC may, at 
        its own discretion, release an update patch for 
        error-correction (hereinafter referred to as modification 
        program), or information, including NEC approved method of 
        error correction.
        The modification program provided to you will be regarded as 
        the licensed program, and will follow the terms and 
        conditions of this license agreement.

  7) No liability
     In no event shall NEC be held responsible for any indirect, 
     direct or consequential damages (including damages which NEC can 
     or can not foresee) which may be claimed to you by a third party.

  8) Others
     The user must agree that any disputes concerning this user 
     license agreement will be settled at the Tokyo district court as 
     the exclusively appointed court.

  The copyrights for this software is held by NEC.
  * Linux is a registered trademark of Linus Torvalds in the United 
    States and other countries.
  * All other product and company names are trademarks or registered 
    trademarks of their respective owners.
  * All other product, brand, or trade names used in this publication 
    are the trademarks or registered trademarks of their respective 
    trademark owners.