================================================================================
DianaScope
================================================================================
[Software name] DianaScope Manager Ver.1.03.06
DianaScope Agent (Windows) Ver.1.09.06
DianaScope Agent (Linux) Ver.1.09.06
DianaScope PXE Service Ver.1.01.02
DianaScope Configuration Ver.1.00
NEC ESMPRO Manager Association Module Ver.1.02.04
[Registered name] ds_ins1.exe - ds_ins7.exe
[Copyrighter] NEC Corporation
[Users] Users using the DianaScope
[Software type] Utility
[Creation method] Self-extract
================================================================================
[Software introduction]
DianaScope (hereafter called "The software") is software designed for reducing
operational management costs by remotely managing servers.
One server license is required for each server to be managed remotely by
using DianaScope.
DianaScope Server License is provided as products below.
1. UL1198-001 SystemGlobe DianaScope Additional Server License(1)
2. UL1198-011 SystemGlobe DianaScope Additional Server License(10)
Carefully read the following user license agreement for NEC software before
using the software.
If you do not agree to the terms of the agreement, do not download this software.
By downloading the software, you agree to be bound by the terms of the agreement.
[User license agreement for NEC software]
This user license agreement is an agreement between you and the NEC Corporation
(hereinafter referred to as NEC). Under the following terms of agreement,
NEC grants you the right to utilize this software program (hereinafter referred to
as "licensed program"), but the customer will be bound to these to the terms.
NEC will not be held liable for the use, installation, or the results of the
use of the licensed program.
1. License
NEC Corporation (hereinafter referred to as "NEC") grants you a personal
and non-exclusive license to use the provided software (the "Software")
only on one machine at any one time, and only in the country where you
acquired the Software. The Software is in "use" on a machine when it is
loaded into temporary memory (i.e. RAM) or installed into permanent memory
(i.e. hard disk or other storage device) of that machine. You obtain no
license other than those expressly granted you under this Agreement.
2. Period
(1) You may terminate the license granted hereunder by notifying us in
writing at least one month prior to the desired termination date.
(2) NEC may terminate the license granted you hereunder at any time if
you fail to comply with any terms and conditions of this Agreement.
(3) Upon termination of the license, you must destroy or dispose of the
Software, any copies of the Software and manual and other materials
provided with the Software.
3. Copyright
No title to the Software shall be transferred to you.
4. Copying, modification
(1) You may make only one copy of the Software solely for a backup purpose,
provided that you shall reproduce the copyright notices on each copy
of the Software.
(2) You may not copy, modify, combine, alter or otherwise change or
disposed of the Software except as provided in this Agreement.
(3) You may not reproduce the manual or other related documentation
accompanying the Software.
5. Other Restrictions
(1) You may not rent, lease, assign, transfer or make available the
Software to any third party.
(2) You may not export or transfer, directly or indirectly, the Software
to any country other than the country where you acquire the Software.
6. Reverse compile
You may not reverse engineer, reverse compile, disassemble or otherwise
analyze the Software.
7. Limitation of Warranties
(1) THE SOFTWARE IS PROVIDED "AS IS" WITHOUT WARRANTY OF
ANY KIND. NEC AND ITS SUPPLIERS DISCLAIM ALL
WARRANTIES FOR THE SOFTWARE, EITHER EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO, WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
FURTHER, NEC AND ITS SUPPLIERS MAKE NO REPRESENTATION
OR WARRANTY THAT THE USE OF ANY SOFTWARE WILL NOT
INFRINGE ANY THIRD PARTY嫻S RIGHTS, INCLUDING BUT
NOT LIMITED TO, ANY INTELLECTUAL PROPERTY RIGHTS.
IN NO EVENT SHALL NEC AND ITS SUPPLIERS BE HELD
LIABLE WITH RESPECT TO ANY CLAIM BY YOU OR ANY THIRD
PARTY ON ACCOUNT OF OR ARISING OUT OF THE USE OF THE
SOFTWARE.
(2) NEC will replace the defective media at no charge if
such defect is discovered and the Software is returned
to NEC within 30 days of your receipt of the Software.
This Section 7(2) provides NEC's sole liability and
your exclusive remedy hereunder.
8. Limitation of Liabilities
IN NO EVENT SHALL NEC OR ITS SUPPLIER SHALL BE LIABLE FOR
ANY INDIRECT OR CONSEQUENTIAL DAMAGES OR LOSS OF PROFIT OR
DAMAGES BASED ON ANY THIRD PARTY CLAIM, EVEN IF NEC HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
NEC'S ENTIRE LIABILITY FOR ANY REASONS WHATSOEVER SHALL BE
LIMITED TO THE AMOUNT ACTUALLY PAID BY YOU FOR THE SOFTWARE
THAT CAUSED THE LIABILITY OF NEC.
9. This Agreement shall be governed by the laws of the country
in which you acquired the Software.
================================================================================
Installation procedure
================================================================================
The procedures of extract and installation of this software are shown for Windows.
[Extract procedure]
(1) Download ds_ins1.exe - ds_ins7.exe into a suitable location. (The C:¥download
folder is the download destination in this example.)
(2) Click the [Start] button, and then [Run...].
(3) Enter "C:¥download¥ds_ins1.exe" into the "Open" field, then click the [OK] button.
The dialog box will open.
(4) Please input the folder name in which the extracted file will be stored.
And push the [OK] button.
Folder "dianascope" will be made in the specified folder and the required
software and explanation files will be extracted to the folder.
(The C:¥download folder is the extracted destination in this example.)
(5) Please extract ds_ins2.exe - ds_ins7.exe similarly.
[Installation procedure]
(1) Please open the "C:¥download¥dianascope¥menu¥en¥menu.html" file extracted by
[Extract procedure] with Microsoft Internet Explorer.
The DianaScope installation menu for Windows will open.
(2) Please install each module of DianaScope according to the description of
an online document or the instruction of the installation menu.
[Confirmation of update]
Please confirm each module was updated correctly. (Refer to the [Confirm method
of the version].)
Please refer to DianaScope online document for the installation procedure on Linux.
You can open the online document from "C:¥download¥dianascope¥menu¥en¥document.html"
file that is extracted by [Extract procedure].
================================================================================
Confirm method of version
================================================================================
[DianaScope Manager]
- Please login DianaScope, and click "DianaScope" of the header menu.
- Please open "Control Panel" - "Add or Remove Programs" on Windows, and click
support information on DianaScope Manager.
[DianaScope Agent (Windows)]
Follow the procedure below.
(1) Please click "All Programs" - "DianaScope Agent" - "DianaScope Agent" from
"Start" button.
The main dialog box of DianaScope Agent will be displayed.
(2) Please click the icon displayed in the left of the title bar of the dialog box.
(3) Please click "About DianaScope Agent".
It is possible to confirm it remotely.
- Please login DianaScope, and click "Server Properties" - "Information" of the
managed server.
[DianaScope Agent (Linux)]
- Please move to /usr/DianaScopeSysman directory.
Please execute ./agentconf.
- It is possible to confirm it remotely.
Please login DianaScope, and click "Server Properties" - "Information" of the
managed server.
[DianaScope PXE Service]
When installing it, it is displayed on the installer.
[DianaScope Configuration]
Follow the procedure below.
(1) Please click "All Programs" - "DianaScope Configuration" - "DianaScope
Configuration" from "Start" button.
The main dialog box of DianaScope Configuration will be displayed.
(2) Please click the icon displayed in the left of the title bar of the dialog box.
(3) Please click "About DianaScope Configuration".
[NEC ESMPRO Manager Association Module]
Please open "Control Panel" - "Add or Remove Programs" on Windows,
and click support information on NEC ESMPRO Manager Association.
================================================================================
Target models
================================================================================
Please refer to DianaScope online document "DianaScope Managed Servers Summary"
for the target model.
You can open the online document from "C:¥download¥dianascope¥menu¥en¥document.html"
file that is extracted by [Extract procedure].
================================================================================
File list
================================================================================
dianascope¥agt_w¥en¥all
02/15/2005 08:12 PM 61,440 AgtInstSrv.dll
05/17/2005 01:17 PM 477,258 data1.cab
05/17/2005 01:17 PM 13,231 data1.hdr
05/17/2005 01:17 PM 1,015,020 data2.cab
05/17/2005 01:29 PM 9 DsAgtRev.bin
06/21/2004 01:50 PM 3 DsAgtSpt.bin
07/25/2002 04:07 PM 346,602 ikernel.ex_
05/17/2005 01:17 PM 417 layout.bin
10/05/2000 03:00 PM 54,272 Setup.exe
05/17/2005 01:17 PM 100 Setup.ini
05/17/2005 01:17 PM 139,482 setup.inx
11 File(s) 2,107,834 bytes
dianascope¥agt_w¥en¥cfg
02/15/2005 08:12 PM 61,440 AgtInstSrv.dll
05/17/2005 01:17 PM 477,258 data1.cab
05/17/2005 01:17 PM 13,231 data1.hdr
05/17/2005 01:17 PM 1,015,020 data2.cab
05/17/2005 01:29 PM 9 DsAgtRev.bin
06/21/2004 01:34 PM 3 DsAgtSpt.bin
07/25/2002 04:07 PM 346,602 ikernel.ex_
05/17/2005 01:17 PM 417 layout.bin
10/05/2000 03:00 PM 54,272 Setup.exe
05/17/2005 01:17 PM 100 Setup.ini
05/17/2005 01:17 PM 139,482 setup.inx
11 File(s) 2,107,834 bytes
dianascope¥agt_w¥jp¥all
02/15/2005 08:12 PM 61,440 AgtInstSrv.dll
05/17/2005 01:15 PM 477,258 data1.cab
05/17/2005 01:15 PM 13,231 data1.hdr
05/17/2005 01:15 PM 1,013,528 data2.cab
05/17/2005 01:29 PM 9 DsAgtRev.bin
06/21/2004 01:50 PM 3 DsAgtSpt.bin
07/25/2002 04:07 PM 346,602 ikernel.ex_
05/17/2005 01:15 PM 417 layout.bin
10/05/2000 03:00 PM 54,272 Setup.exe
05/17/2005 01:15 PM 100 Setup.ini
05/17/2005 01:15 PM 139,482 setup.inx
11 File(s) 2,106,342 bytes
dianascope¥agt_w¥jp¥cfg
02/15/2005 08:12 PM 61,440 AgtInstSrv.dll
05/17/2005 01:15 PM 477,258 data1.cab
05/17/2005 01:15 PM 13,231 data1.hdr
05/17/2005 01:15 PM 1,013,528 data2.cab
05/17/2005 01:30 PM 9 DsAgtRev.bin
06/21/2004 01:34 PM 3 DsAgtSpt.bin
07/25/2002 04:07 PM 346,602 ikernel.ex_
05/17/2005 01:15 PM 417 layout.bin
10/05/2000 03:00 PM 54,272 Setup.exe
05/17/2005 01:15 PM 100 Setup.ini
05/17/2005 01:15 PM 139,482 setup.inx
11 File(s) 2,106,342 bytes
dianascope¥agt_w¥vnc
10/02/1998 07:15 PM 297,989 _INST32I.EX_
10/02/1998 07:06 PM 27,648 _ISDel.exe
09/29/1998 05:34 PM 34,816 _Setup.dll
03/16/2001 02:31 PM 181,565 _sys1.cab
03/16/2001 02:31 PM 3,905 _sys1.hdr
03/16/2001 02:31 PM 10,375 _user1.cab
03/16/2001 02:31 PM 4,439 _user1.hdr
03/16/2001 02:31 PM 117 DATA.TAG
03/16/2001 02:31 PM 367,433 data1.cab
03/16/2001 02:31 PM 3,973 data1.hdr
09/18/1998 03:12 PM 4,679 lang.dat
03/16/2001 02:31 PM 629 layout.bin
07/27/1998 06:41 PM 450 os.dat
01/13/2000 12:52 PM 82,278 setup.bmp
10/02/1998 07:04 PM 71,680 Setup.exe
03/16/2001 02:31 PM 87 SETUP.INI
03/06/2000 03:19 PM 58,485 setup.ins
03/16/2001 02:31 PM 49 setup.lid
01/13/2000 12:52 PM 48 vssver.scc
19 File(s) 1,150,645 bytes
dianascope¥agt_x
04/14/2005 10:47 PM 112,820 dianascopeagent-1.09.06-x.i386.rpm
04/14/2005 01:44 PM 70,430 dianascopesysman-1.09.06-x.i386.rpm
04/14/2005 11:48 AM 5,852 install-agent.sh
01/28/2005 11:18 AM 13,873,802 j2re-1_4_2_07-linux-i586-rpm.bin
04/14/2005 11:47 AM 3,743 uninstall-agent.sh
11/16/2004 07:41 PM 683,015 vnc-server-3.3.3r2-18.6.i386.rpm
6 File(s) 14,749,662 bytes
dianascope¥config_w¥en
07/13/2004 01:48 AM 476,555 data1.cab
07/13/2004 01:48 AM 12,560 data1.hdr
07/13/2004 01:48 AM 756,249 data2.cab
02/03/2004 09:18 PM 9 DsCfgRev.bin
07/25/2002 04:07 PM 346,602 ikernel.ex_
07/13/2004 01:48 AM 417 layout.bin
10/05/2000 03:00 PM 54,272 Setup.exe
07/13/2004 01:48 AM 109 Setup.ini
07/13/2004 01:48 AM 135,758 setup.inx
9 File(s) 1,782,531 bytes
dianascope¥config_w¥jp
02/13/2004 08:29 PM 432,956 data1.cab
02/13/2004 08:29 PM 11,563 data1.hdr
02/13/2004 08:29 PM 760,054 data2.cab
02/03/2004 09:18 PM 9 DsCfgRev.bin
07/25/2002 04:07 PM 346,602 ikernel.ex_
02/13/2004 08:29 PM 417 layout.bin
10/05/2000 03:00 PM 54,272 Setup.exe
02/13/2004 08:28 PM 96 Setup.ini
02/13/2004 08:28 PM 135,758 setup.inx
9 File(s) 1,741,727 bytes
dianascope¥doc¥en
04/18/2005 02:28 PM 328,457 ds_cli_e.pdf
05/20/2005 11:02 AM 1,382,081 ds_im_e.pdf
04/06/2005 05:39 PM 105,566 ds_svr_e.pdf
3 File(s) 1,816,104 bytes
dianascope¥doc¥jp
04/15/2005 07:15 PM 515,066 ds_cli_j.pdf
05/20/2005 11:08 AM 1,780,574 ds_im_j.pdf
04/06/2005 05:36 PM 232,284 ds_svr_j.pdf
3 File(s) 2,527,924 bytes
dianascope¥jre_w
01/28/2005 11:11 AM 15,746,272 j2re-1_4_2_07-windows-i586-p.exe
1 File(s) 15,746,272 bytes
dianascope¥jre_x
01/28/2005 11:18 AM 13,873,802 j2re-1_4_2_07-linux-i586-rpm.bin
1 File(s) 13,873,802 bytes
dianascope¥menu
07/04/2004 03:42 PM 579 menu.css
1 File(s) 579 bytes
dianascope¥menu¥en
12/06/2004 08:27 PM 1,206 document.html
02/17/2005 11:53 AM 4,433 menu.html
2 File(s) 5,639 bytes
dianascope¥menu¥jp
02/23/2005 07:54 PM 1,118 document.html
02/17/2005 11:52 AM 4,384 menu.html
2 File(s) 5,502 bytes
dianascope¥mgr_w
04/15/2005 11:13 AM 20,480 1033.mst
04/15/2005 11:13 AM 48,128 1041.mst
04/15/2005 11:13 AM 6,129,014 Data1.cab
04/15/2005 11:13 AM 1,334,712 DianaScope Manager.msi
07/26/2004 04:50 PM 1,062 readme.txt
04/15/2005 11:13 AM 2,773,517 setup.exe
6 File(s) 10,306,913 bytes
dianascope¥mgr_x
04/15/2005 01:01 PM 9,061,688 dianascope-1.03.06-x.i386.rpm.bin
1 File(s) 9,061,688 bytes
dianascope¥pxe_w
03/16/2005 02:06 PM 562,815 data1.cab
03/16/2005 02:06 PM 18,881 data1.hdr
03/16/2005 02:06 PM 3,452,170 data2.cab
07/25/2002 04:07 PM 346,602 ikernel.ex_
03/16/2005 02:06 PM 417 layout.bin
10/05/2000 03:00 PM 54,272 Setup.exe
03/16/2005 02:06 PM 64 Setup.ini
03/05/2005 10:35 AM 156,611 setup.inx
8 File(s) 4,591,832 bytes
dianascope¥tomcat_w
04/06/2004 10:51 AM 8,977,794 jakarta-tomcat-4.1.30.exe
1 File(s) 8,977,794 bytes
dianascope¥tomcat_x
07/12/2004 05:48 PM 9,687,160 jakarta-tomcat-4.1.30.tgz
1 File(s) 9,687,160 bytes
dianascope¥trapdll_w¥en
02/25/2005 02:32 PM 60,287 Data1.cab
02/25/2005 02:32 PM 701,724 ESMPRO Manager association module.msi
07/28/2004 11:12 AM 145 readme.txt
02/25/2005 02:32 PM 4,477,427 setup.exe
4 File(s) 5,239,583 bytes
dianascope¥trapdll_w¥jp
02/25/2005 02:34 PM 60,972 Data1.cab
07/28/2004 11:13 AM 184 readme.txt
02/25/2005 02:34 PM 4,477,830 setup.exe
3 File(s) 4,538,986 bytes
dianascope¥trapdll_w¥jp¥ESMPRO クTロ[クoク}クlロ[クWククノAヤgハ@モ
02/25/2005 02:34 PM 963,872 .msi
1 File(s) 963,872 bytes
==============================================================================
Use conditions of software appended to DianaScope
==============================================================================
NEC DianaScope includes JRE (Java Runtime Environment) distributed free of charge
by Sun Microsystems, Inc., Tomcat distributed free of charge by Apache
Software Foundation, and the VNC (Virtual Network Computing) distributed free of charge
by AT&T laboratories Cambridge. The end user license agreement is necessary
for using these products. For details on their copyright and ownership, see the
LICENSE files below.
Tomcat: LICENSE under the
JRE: LICENSE under the
------------------------------------------------------------------------------
[Trademarks and copyright]
All other product, brand, or trade names used in this publication are the
trademarks or registered trademarks
of their respective trademark owners.
------------------------------------------------------------------------------
Copyright NEC Corporation 2004-2005