===================================================================================
Software introduction | Installation procedure
===================================================================================
(( Windows Server 2003 x64 Edition Fibre Channel driver ))
[ Software name ] Windows Server 2003 x64 Edition Fibre Channel driver
[ Registered name ] Fcdrvx64.exe
[ Copyright (C) ] Emulex Corporation of the U.S
[ Applicable models ] NEC Express5800 Server
[ Users ] Customers who use Fibre Channel Controller with Windows 2003 Server
x64 Edition on an NEC Express5800 server.
[ Software type ] Driver
[ Creation method ] Self-extract
===================================================================================
[ Software introduction ]
The Driver for Fibre Channel controller(N8190-120) supports Windows Server 2003 x64
Edition installation on an NEC Express5800/100 Series computer.
Carefully read the following user license agreement for NEC software before using
this software. If you do not agree to the terms of the agreement, do not download
this software. By downloading this software, you agree to be bound by the
terms of the agreement.
[ User license agreement for NEC software ]
This user license agreement is an agreement between you and NEC Corporation
(hereinafter called "NEC"). Under the following terms of this agreement,
NEC grants you the right to use the software program (hereinafter called "licensed program"),
and you are to agree to the terms. You are to take responsibilities for the choice,
installation, or use of the licensed program, or the results of the usage of the
usage of the licensed program.
1. Term
(1) This user license agreement goes into effect on the day you receive
this software product.
(2) You may terminate the right to use the licensed program under this user
license agreement at any time by giving NEC a month's or longer notice by letter.
(3) NEC may terminate your right to use the licensed program at any time
if you fail to comply with the terms of this user license agreement.
(4) Your right to use the licensed program continues to exist until it terminates in
accordance with the provisions of this user license agreement.
(5) When your right to use the licensed program terminates, all of your other rights
under this user license agreement also terminate. You must destroy the licensed program,
all the copies of the licensed program, and the related documents (e.g., manuals)
provided with the licensed program as soon as your right to use the licensed
program terminates.
2. Use right
You may use the licensed program only on NEC Express5800 servers (NEC Express5800/
100 Series) using your Microsoft Windows Server 2003 x64 Edition.
3. Copy, alteration, and linkage of the licensed program
(1) You may make a copy of the licensed program only to use it as a backup copy
in case program data is lost or destroyed. However, this is not the case
if the licensed program is installed in fixed storage. In this case,
you may keep it only to use in case the storage medium of the licensed program
is lost or destroyed.
(2) You must give the expressions of the copyright of the licensed program and
other rights to all the copies of the licensed program.
(3) Unless otherwise specified in this user license agreement, you may not use,
copy, alter, or link the licensed program, you may not reproduce it in publications
or networks, or you may not make your own decision on handling it in any other ways.
(4) You may not copy the related documents (e.g., manuals) provided with the licensed
program or reproduce them in publications or networks under any circumstances.
(5) This user license agreement is not to transfer the intellectual property for the
licensed program to you.
4. Transfer of the licensed program
(1) You may transfer all of your rights under this user license agreement only
if satisfying all the following conditions:
(a) You are to transfer this user license agreement, the licensed program,
all the copies of the licensed program, and the related documents (e.g., manuals)
provided with the licensed program, and retain none of them.
(b) The recipient agrees to the terms of this user license agreement.
(2) Unless otherwise specified in this user license agreement, you may not loan or
transfer the licensed program or the right to use it to a third party, or you
may not make your own decision on handling it in any other ways.
5. Decompilation
You may not reverse engineer, decompile, or disassemble the licensed program.
6. Term of a guarantee
(1) NEC does not give any guarantee for the licensed program. You are to be
liable and to pay for problems arising from the use of the licensed program.
(2) Irrespective of the term (1), when NEC corrects licensed-program errors (bugs),
NEC may, at its discretion, provide an error-corrected program, a program for
correction (hereinafter called a modification program), or information for
correction by an NEC-decided method. The modification program provided to you
is regarded as the licensed program.
7. No liability
NEC assumes no liability for your lost profit, damages arising from special
circumstances (including damages which NEC can or could foresee), or damages you
are asked for by any third party.
8. Others
Disputes over this user license agreement are to be settled at the Tokyo district
court as the exclusively agreed competent court.
--------------------------------------------------------------------------------
Use the following procedure to extract and install this software.
[ Extract procedure ]
(1) Download Fcdrvx64.EXE to a suitable location on your hard disk.
(2) Click the [Start] button and then click [Run...].
(3) Enter the full pathname (such as C:¥TEMP¥Fcdrvx64.EXE) of the downloaded
Fcdrvx64.EXE in the Name field and then click the [OK] button.
(4) Enter the folder name of the module extraction destination and click
the [Unzip] button.
[ Install procedure]
(1) Log in it using the user name to which an authority of administration is
assigned (e.g. administrator).
(2) Select [Settings] from the [Start] menu and boot [Control Panel].
Select [Management Tool] [Computer Management], and click [Device Manager].
(3) Click [SCSI and RAID controllers], select the [Emulex LP1050 Fibre Channel Host Adapter],
and open the properties of the controller.
(4) Click [Update Driver] on the [Driver] tab and select [Install from a list
or specific location]. Click [Next].
(5) Click [Don't search I will choose the driver install].Click [NEXT].
(6) Click [Have Disk],Type "Unziped folder pathname(such as C:¥TEMP)" in the
[Copy manufacturer's files from] entry box. Click [OK].
(7) Select [Emulex LightPluse HBA - StorportMiniportDriver]. Click [Next].
(8) When Dialogbox displays [Completing the Hardware Update wizard],
install is finished.
(9) This completes the installation of driver, use an appropriate tool such as
Explorer to double-click (Unziped folder)¥Update¥FcRegUp.vbs.
(10) Check the FibreChannel environment used and select [Yes] or [No].
(11) After the registry is updated, the window appears as shown below.
Select [Yes] to reboot the system.
--------------------------------------------------------------------------------
[ Trademarks and copyright ]
The copyright for this software is held by NEC.
Microsoft and its logos, and Windows and Windows Server are registered trademarks
or trademarks of the Microsoft Corporation in the U.S. and other countries.
Emulex is a registered trademark of Emulex Corporation of the U.S.
All other company and product names are trademarks or registered trademarks of
their respective owners.
Copyright NEC Corporation 2005