--------------------------------------------------------------------------------
NEC ESMPRO Agent Ver4.1
Windows Server 2003 SP1 Update Module
--------------------------------------------------------------------------------
[ Software name ] NEC ESMPRO Agent Ver4.1
[ Registered name ] esmprosa.exe
[ Copyright (C) ] NEC Corporation 2005
[ Users ] Customers who use NEC ESMPRO Agent Ver4.1
[ Software type ] Application software
[ Creation method ] Self-extract
--------------------------------------------------------------------------------
[ Software introduction ]
The NEC ESMPRO Agent Ver4.1 Windows 2003 SP1 Update Module(hereinafter called
"this software") supports the NEC Express5800 servers that installed Windows
Server 2003 SP1.
Carefully read the following user license agreement for NEC software before using
this software. If you do not agree to the terms of the agreement, do not download
this software. By downloading this software, you agree to be bound by the terms of
the agreement.
[ User license agreement for NEC software ]
This user license agreement is an agreement between you and the NEC Corporation
(hereinafter referred to as NEC). Under the following terms of agreement, NEC
grants you the right to utilize this software program (hereinafter referred to as
"licensed program"), but the customer will be bound to these to the terms.
NEC will not be held liable for the use, installation, or the results of the use
of the licensed program.
1. Terms
(1) This user license agreement takes effect from the day the software product is
received by the user.
(2) You may terminate your rights to use the licensed program under this user
license agreement at any time, by notifying NEC, in writing, at least one month
or longer prior to the requested date of termination.
(3) NEC reserves the right to terminate this license agreement if you violate any
of the provisions in this agreement.
(4) Your rights to use the licensed program will continue until it is terminated
in accordance with the provisions stated in this license agreement.
(5) If the agreement is terminated for any reason by either party, you are
required to destroy the software, copies of the software and its manuals and
media, or return them to NEC immediately.
2. Usage right
You may use the licensed program only on NEC Express5800 servers (NEC Express5800
Series) using your Microsoft Windows Server 2003.
3. Copying, altering, and combining of the licensed program
(1) You are granted the permission to create on copy of the licensed program to
use as a backup in case the program data becomes lost, damaged or destroyed.
Once the licensed program is loaded into memory on a PC, a copy of the program
may be stored only as backup incase the fixed memory of the PC becomes damaged
or lost.
(2) The copyrights and license agreement must be attached to all copies of the
licensed program.
(3) Unless otherwise specified in this user license agreement, you may not use,
copy, alter the licensed program or combine it with another module. It may
not reproduced in any publications or networks. The handling of the licensed
program and/or documents must strictly follow the terms and conditions of
this license agreement, and at no time shall it be handled in any other terms.
(4) All related documents (e.g., manuals) provided with the licensed program may
not be copied, altered or reproduced in any publications or networks, under
any circumstances.
(5) This user license agreement does not transfer the intellectual property of
the licensed program to the user.
4. Transfer of the licensed program
(1) All rights of this license agreement may be transferred to another party ONLY
when the following conditions are satisfied:
(a) All materials including the licensed program, all copies of the licensed
program, this license agreement, and all other related documents are
transferred to the other party, and no material concerning the licensed
program is retained by you.
(b) The recipient party agrees to conform to the terms of this user license
agreement.
(2) Unless otherwise specified in this user license agreement, the licensed
program or rights for its use may not be transferred to a third party.
All matters concerning the transferring of the rights and program must
strictly follow the terms and conditions included in this license agreement.
5. Decompilation
You may not reverse engineer, decompile, or disassemble the licensed program.
6. Term of a guarantee
(1) NEC makes no warranties, expressed or implied concerning this licensed program,
and will at no time, be held liable to pay for any expenses which may be
incurred, should a problem result from the use of the licensed program.
(2) Regardless of the terms stated above in term (1), upon correction of the
licensed program errors (bugs), NEC may, at its own discretion, release an
update patch for error-correction (hereinafter referred to as modification
program), or information, including NEC approved method of error correction.
The modification program provided to you will be regarded as the licensed
program, and will follow the terms and conditions of this license agreement.
7. No liability
In no event shall NEC be held responsible for any indirect, direct or
consequential damages (including damages which NEC can or can not foresee) which
may be claimed to you by a third party.
8. Others
The user must agree that any disputes concerning this user license agreement will
be settled at the Tokyo district court as the exclusively appointed court.
--------------------------------------------------------------------------------
[ Installation procedure ]
Use the following procedure to install this software.
(1) Administrator authority is required for installation.
(2) Copy the downloaded "esmprosa.exe" to a suitable location on your hard disk.
(The C:¥TEMP folder is the download destination in this example.)
(3) Double click or execute "esmprosa.exe" file.
(4) Used cmd.exe, execute C:¥TEMP¥ESMPROSA¥update.bat to start an update.
By the following messages, installation of this software is completion.
"UPDATE SUCCESS"
(5) This update replaces the following files. Please check size and date.
%SystemRoot%¥system32¥
File name Date Size
--------------------------------------------------
esmfs.exe 04/07/2005 13:43 77,824
(6) Installation of this software is completion in the above operation.
There is no necessity of resuming service of NEC ESM Agent, it's not
necessary to reboot a system.
[ Note ]
(1) Directories and modules of this update.
¥
+---README.TXT
|
+---ESMPROSA
(file) update.bat
esmfs.exe
(2) About the '%errorlevel%'
Succeeded:0
Failed :1 (The setup program failed to stop ESMFSService.)
:2 (The setup program failed to copy any files.)
:3 (The setup program failed to start ESMFSService.)
:9 (Invalid parameter)
(3) About the state of 'ESMFSService'
This setup program will keep the state (either starting or stopping) of
ESMFSService the state of starting installation.
--------------------------------------------------------------------------------
[ Installation procedure ]
Use the following procedure to install this software.
(1) Administrator authority is required for installation.
(2) Copy the downloaded "esmprosa.exe" to a suitable location on your hard disk.
(The C:¥TEMP folder is the download destination in this example.)
(3) Double click or execute "esmprosa.exe" file.
(4) Used cmd.exe, execute C:¥TEMP¥ESMPROSA¥update.bat to start an update.
By the following messages, installation of this software is completion.
"UPDATE SUCCESS"
(5) This update replaces the following files. Please check size and date.
%SystemRoot%¥system32¥
File name Date Size
--------------------------------------------------
esmfs.exe 04/07/2005 13:43 77,824
(6) Installation of this software is completion in the above operation.
There is no necessity of resuming service of NEC ESM Agent, it's not
necessary to reboot a system.
--------------------------------------------------------------------------------
[APPENDIX]
(1) Directories and modules of this update.
¥
+---README.TXT
|
+---ESMPROSA
(file) update.bat
esmfs.exe
(2) About the '%errorlevel%'
Succeeded:0
Failed :1 (The setup program failed to stop ESMFSService.)
:2 (The setup program failed to copy any files.)
:3 (The setup program failed to start ESMFSService.)
:9 (Invalid parameter)
(3) About the state of 'ESMFSService'
This setup program will keep the state (either starting or stopping) of
ESMFSService the state of starting installation.
-------------------------------------------------------------------------------
[ Trademarks and copyright ]
The copyrights for this software is held by NEC.
* Microsoft, Windows and Windows Server 2003 are registered
trademarks of Microsoft Corporation in the U.S.A. and other countries.
* All other product and company names are trademarks or registered trademarks of
their respective owners.
Copyright NEC Corporation 2005