===============================================================================
NEC Express5800/120Bb-6,120Bb-d6,120Bb-m6 FRU update module
120Bb-6 : Revision 10.10,10.20
120Bb-d6: Revision 12.02
120Bb-m6: Revision 14.04
===============================================================================
Software name : NEC Express5800/120Bb-6,120Bb-d6,120Bb-m6 FRU update module
Registered name : FRU03D4E.zip
Models : NEC Express5800/120Bb-6,120Bb-d6,120Bb-m6
Users : See below
Type of software : Firmware / System Management Controller
Type of file : ZIP archived
-------------------------------------------------------------------------------
[Software introduction]
This FRU update module (hereinafter called "this software") with the specific
BIOS version (The required BIOS versions are listed in .)
supports the following functional enhancement in the NEC Express5800/120Bb-6,
120Bb-d6,120Bb-m6 models:
- Supported Windows Server(R) 2008
- Supported iSCSI CLP Command
- This FRU update and BIOS update are required to support above functional
enhancement. The required BIOS versions are followings.
[Required BIOS versions]
120Bb-6 : Phoenix cME(tm) TrustedCore(tm) Server Release 1.0.0047 or later
120Bb-d6: Phoenix cME(tm) TrustedCore(tm) Server Release 1.0.0127 or later
120Bb-m6: Phoenix cME(tm) TrustedCore(tm) Server Release 1.0.0227 or later
- Incorrect update operations may cause a system start failure.
Read this explanation thoroughly, until fully understanding
the correct system update procedures.
If an unexpected problem arises (e.g., power failure, lightning, shutdown,
or noise) during the data rewrite process, a system malfunction or
the power supply loss may occur, resulting in equipment damaged,
which may cause the equipment to fail or operate incorrectly.
In such a case, repair expenses may be charged to the customer.
-------------------------------------------------------------------------------
[Users whose system needs to be updated]
Applicable modes and BIOS versions are listed below required
to FRU and BIOS updating.
- Models
NEC Express5800/120Bb-6 (N8400-029F,030F,031F,032F,033F,037F,
N8400-050F,051F,052F,053F,
N8400-053AF,057AF,058AF,059AF,060AF,062AF)
NEC Express5800/120Bb-d6 (N8400-040F,042F,043F,064AF,065AF,066AF,067AF)
NEC Express5800/120Bb-m6 (N8400-046F,048F,049F,071AF,072AF,073AF,074AF)
- BIOS versions
120Bb-6 : Phoenix cME(tm) TrustedCore(tm) Server Release 1.0.0042 or earlier
120Bb-d6: Phoenix cME(tm) TrustedCore(tm) Server Release 1.0.0122 or earlier
120Bb-m6: Phoenix cME(tm) TrustedCore(tm) Server Release 1.0.0222 or earlier
Be certain to confirm the BIOS version of your server.
BIOS confirmation procedures:
(1) Power on the server.
(2) When the following message appears, press the F2 key to start the BIOS
Setup Menu.
"Press to enter SETUP"
(3) Using the arrow keys, move the cursor to [Server].
(4) Select the [System Management] sub menu and press the Enter key.
(5) The BIOS version of your server will be displayed.
(6) After confirmation of the BIOS version, press the ESC key and exit
the [System Management] sub menu.
(7) Move the cursor to [Exit], using the arrow keys.
(8) Select [Exit Discarding Changes], and exit the BIOS Setup Menu.
Refer to the User's Guide for details on BIOS Setup.
-------------------------------------------------------------------------------
[ License Agreement ]
NEC Corporation (hereinafter referred to as "NEC") grants you a personal and
non-exclusive license to use the software (hereinafter referred to as the
"Software") provided only on one machine at any one time.
Under the following terms of agreement, NEC grants you the right to utilize this
software program (hereinafter referred to as "Software"), but the customer will
be bound to these to the terms.
NEC will not be held liable for the use, installation, or the results of the use
of the licensed program.
1 Period
1.1 This Agreement shall come into force on the date of your receipt of the
Software.
1.2 You may terminate the license granted hereunder by notifying us in
writing at least one month prior to the desired termination date.
1.3 NEC may terminate the license granted you hereunder at any time if you
fail to comply with any terms and conditions of this Agreement.
1.4 Your rights to use the Software will continue until it is terminated in
accordance with the provisions stated in this license agreement.
1.5 Upon termination of the license, other rights granted you hereunder shall
also be terminated You must destroy or dispose of the Software, any
copies of the Software and manual and other materials provided with the
Software.
2 Usage right
The Software shall solely be used in the NEC Express5800 server and
workstation products that operate Microsoft(R) Windows(R) 2000,
Windows Server(R) 2003, Windows(R) XP.
3 Copying, modifying, and combining
3.1 You are granted the permission to create one copy of the Software to use
as a backup in case the program data becomes lost, damaged or destroyed.
Once the Software is loaded into memory on a PC, a copy of the program
may be stored only as backup incase the fixed memory of the PC becomes
damaged or lost.
3.2 The copyrights and license agreement must be attached to all copies of
the Software.
3.3 Unless otherwise specified in this user license agreement, you may not
use, copy, alter the Software or combine it with another module. It may
not reproduced in any publications or networks. The handling of the
licensed program and/or documents must strictly follow the terms and
conditions of this license agreement, and at no time shall it be handled
in any other terms.
3.4 All related documents (e.g., manuals) provided with the Software may not
be copied, altered or reproduced in any publications or networks, under
any circumstances.
3.5 This user license agreement does not transfer the intellectual property
of the licensed program to the user.
4 Transfer
4.1 All rights of this license agreement may be transferred to another party
ONLY when the following conditions are satisfied:
4.1.1 All materials including the Software, all copies of the Software, this
license agreement, and all other related documents are transferred to
the other party, and no material concerning the licensed program is
retained by you.
4.1.2 The recipient party agrees to conform to the terms of this user license
agreement.
4.2 UNLESS OTHERWISE SPECIFIED IN THIS USER LICENSE AGREEMENT, THE SOFTWARE
OR RIGHTS FOR ITS USE MAY NOT BE TRANSFERRED TO A THIRD PARTY. ALL
MATTERS CONCERNING THE TRANSFERRING OF THE RIGHTS AND PROGRAM MUST
STRICTLY FOLLOW THE TERMS AND CONDITIONS INCLUDED IN THIS LICENSE
AGREEMENT.
5 Reverse compile
You may not reverse engineer, decompile, or otherwise disassemble the
Software.
6 Limitation of warranties
6.1 NEC MAKES NO WARRANTIES, EXPRESSED OR IMPLIED CONCERNING THIS
SOFTWARE, AND WILL AT NO TIME, BE HELD LIABLE TO PAY FOR ANY EXPENSES
WHICH MAY BE INCURRED, SHOULD A PROBLEM RESULT FROM THE USE OF THE
SOFTWARE.
6.2 Regardless of the terms stated above in term 6.1, upon correction of
the Software errors (bugs), NEC may, at its own discretion, release an
update patch for error-correction (hereinafter referred to as
modification program), or information, including NEC approved method of
error correction. The modification program provided to you will be
regarded as the licensed program, and will follow the terms and
conditions of this license agreement.
7 Limitation of liabilities
In no event shall NEC be liable for any indirect or consequential
damages or loss of profit or damages based on any third party claim,
even if NEC has been advised of the possibility of such damages.
8 Other restrictions
The user must agree that any disputes concerning this user license
agreement will be settled at the Tokyo district court as the exclusively
appointed court.
-------------------------------------------------------------------------------
[Installation process]
Use the following procedure to extract and install this software.
- Extraction procedure:
(1) Download FRU03D4E.zip to a desired suitable location on your hard disk.
(2) Unzip FRU03D4E.zip to a suitable location.
This software and explanation file (README.TXT) will be extract under
the "FRU" folder.
- Installation procedure:
Please execute this software update according to explanation file (README.TXT).
-------------------------------------------------------------------------------
[Revision history]
2008/09/08
Revision 10.10,10.20 (NEC Express5800/120Bb-6)
Revision 12.02 (NEC Express5800/120Bb-d6)
Revision 14.04 (NEC Express5800/120Bb-m6)
- Supported Windows Server(R) 2008
- Supported iSCSI CLP Command
-------------------------------------------------------------------------------
[Legal notices (trademarks and copyrights)]
NEC Corporation and its third-party suppliers reserve the copyright to the
Software.
Microsoft, Windows, Windows Server are either registered trademarks
or trademarks of Microsoft Corporation in the United States and/or other
countries.
All other company names and product names mentioned herein are registered
trademarks or trademarks of their respective owners.
-------------------------------------------------------------------------------
Copyright NEC Corporation 2008