===============================================================================
MegaRAID Storage Manager for Windows Ver.2.36-04
===============================================================================
Software name : MegaRAID Storage Manager for Windows
Registered name : MSM_2.36-04_WE1.ZIP
Copyright(C) : NEC Corporation
Models : NEC Express5800/140Hf, 140Re-4, 140Ba-10, 120Rh-2, 120Rg-1,
120Ri-2, 120Li, 120Eh, 120Bb-6, 120Bb-m6, 110Ek, 110Gd, 51Le
Users : For users who will install Windows 2000, Windows Server 2003,
Windows Server 2003 R2, Windows Server 2008, Windows XP and
Windows Vista on NEC Express5800 series.
Type of software: Software / RAID Controller
Type of file : Zip comressed
-------------------------------------------------------------------------------
[ About the software ]
The MegaRAID Storage Manager ("MSM") is the software to manage setting and
status of the MegaRAID Storage Systems(SAS/SATA) from local site or remote site.
The following RAID controllers can be managed by the MSM:
- LSI Logic Embedded MegaRAID(tm)
- N8103-90 Disk Array Controller(External SAS HDD)
- N8103-91 Disk Array Controller(Internal SAS HDD)
- N8103-99 Disk Array Controller(0ch)
- N8403-019 Disk Array Controller
- LSI Logic MegaRAID(tm) SAS PCI EXPRESS(tm) ROMB
Please read the following User License Agreement ("Agreement") carefully. If
you do not agree to the terms and conditions of this Agreement, you shall not
download the Software. Downloading the Software indicates your acceptance of
the terms and conditions of the Agreement.
-------------------------------------------------------------------------------
[ User License Agreement ]
NEC Corporation ("NEC") grants you the right to use the Software under the
terms and conditions of this Agreement only in the country in which you
acquired the Software. You shall agree to all provisions of this Agreement and
assume responsibility for selection, installation, use and effect of the
Software purchased for your desired effect.
1. Terms
1.1 This Agreement shall come into force on the date of your receipt of the
Software.
1.2 You may terminate the license granted hereunder by notifying us in writing
at least one month prior to the desired termination date.
1.3 NEC may terminate the license granted you hereunder at any time if you
fail to comply with any terms and conditions of this Agreement.
1.4 The license to the Software shall remain in force until the license is
terminated on the date set forth hereunder.
1.5 Upon termination of the license, other rights granted you hereunder shall
also be terminated. You must destroy or dispose of the Software, any copies
of the Software and manual and other materials provided with the Software.
2. Copyright
2.1 The Software shall solely be used in the NEC Express5800 servers and
workstations.
2.2 NEC grants you the right to use the Software only in the country in which
you acquired the Software in accordance with the conditions of the
preceding paragraph.
3. Copying, altering, and combining of the Software
3.1 You may only make one copy of the Software solely for a backup purpose,
provided, however, that the copy of the Software is loaded into permanent
memory of the system. You may store the Software solely to prevent damages
or loss of the memory media.
3.2 You shall place the copyright notice and other legends on each copy of the
Software.
3.3 You may not use, copy, alter, combine, publish, reproduce the Software over
the Internet, or otherwise dispose of the Software except as provided in
this Agreement.
3.4 You may not copy, publish the manual or other related documentation
provided with the Software, or reproduce such manual and documentation over
the Internet.
3.5 No intangible property right to the Software shall be transferred to you.
4. Transfer
4.1 You may assign your rights granted hereunder to a third party only if all
conditions below are satisfied:
a. You shall assign and shall not retain this Agreement, the Software, all
copies of the Software, or the manual or other related documentation
provided with the Software.
b. The transferee agrees to this Agreement.
4.2 You shall not sublicense, assign, transfer, or otherwise dispose of the
Software or the right of use to any third party except as provided herein.
5. Reverse compile
You may not reverse engineer, decompile, or otherwise disassemble the Software.
6. Limitation of warranties
6.1 The Software is provided "as is" without warranty of any kind. In no event
shall NEC be liable with respect to any claim by you on account of or
arising out of the use of the Software.
6.2 Notwithstanding the provisions of the preceding paragraph, in case NEC
makes any bug-fix version to the Software, NEC will, at its expense,
furnish you with such bug-fix version, update version, or information in
relation to such bug-fix or update version both in the source code form and
object code form, and such bug-fix version or update version shall be
considered as the licensed Software.
7. No liability
In no event shall NEC be liable for any indirect or consequential damages or
loss of profit or damages based on any third party claim, even if NEC has been
advised of the possibility of such damages.
8. Others
You must agree that any disputes concerning this Agreement will be settled at
the Tokyo district court as the exclusively appointed court.
-------------------------------------------------------------------------------
[Installation procedures]
Perform the following steps to extract the software and install the software.
- How to extract:
(1) Download MSM_2.36-04_WE1.ZIP to a desired directory. (for example,
"C:¥TEMP" folder)
(2) Extract MSM_2.36-04_WE1.ZIP to a desired directory. Then the following
folders are created.
- DOC : The folder which contains MSM ver.2 Users Guide.
- MSM : The folder which contains MSM installation modules.
- How to install:
(1) Uninstall an old version of MSM.
Note:
See MSM User's guide to uninstall the MSM. To uninstall the MSM, be sure
not to uninstall it with [Add or Remove Applications] or [Add or Remove
Programs] in the Control Panel.
(2) Reboot the system.
(3) Install MSM ver.2.36-04.
See MegaRAID Storage Manager Users Guide (Version 2) -Windows Edition-
(SG_MSM2.PDF) to install the MegaRAID Storage Manager.
(4) Reboot the system.
Note:
To use the alert report function of NEC ESMPRO, be sure to install NEC ESMPRO
Manager ESMDiskArray Ver1.31, NEC ESMPRO Agent ESMDiskArray Ver1.51 or later.
See NEC ESMPRO Manager, Agent ESMDiskArray Installation Guide to understand
the feature of ESMDiskArray and how to install them.
-------------------------------------------------------------------------------
[ Trademarks and Copyright ]
The copyright for this software is held by NEC.
*LSI and the LSI logo design are trademarks or registered trademarks of LSI
Corporation.
*Microsoft and Windows are registered trademark of US Microsoft Corporation in
the United States and other countries.
*All other company and product names in this document are the registered
trademark or trademark of their respective owners.
-------------------------------------------------------------------------------
Copyright NEC Corporation 2008