===============================================================================
US310e Firmware Rev.003(Ver 1.30)
===============================================================================
 [Software name]      US310e Firmware Rev.003(Ver 1.30)
 [Registered name]    NEC-WE8S-x64-v130-INTL-US310e.zip
 [Proprietary Holder] Atrust Computer Corp.
 [Applicable models]  NEC Express5800/100 series
 [Users]              Customers who use US310e
 [Software type]      Firmware
 [Creation method]    ZIP archived
-------------------------------------------------------------------------------

[Software introduction] 

  US310e Firmware Rev.003(Ver 1.30) (hereinafter called "this software") is the 
  firmware for US310e.

  This software release provides the following new and enhanced functions.
  Please see "US310e User's Guide FW WE8S 1.30-INTL" for details.

  << WE8S 1.20-INTL >>

      1. The maximum log file size for Atrust Client Setup (called ACS below) 
         has been expanded to 100 MB.

      2. The problem of ACS has been corrected.

      3. Upgraded VMware Horizon Client to version 3.5.2.3039.

      4. Upgraded .NET Framework to version 4.6.1.

 << Notes >>

  - This product release supports Atrust Device Manager (ADM) 2.08.041 or later. 
    If you are using an older version of ADM, upgrade ADM before upgrading the 
    firmware.

  - This product release supports a BIOS version of US310e v1.62 or later. 
    If you are using an older version of BIOS, upgrade BIOS before upgrading 
    the firmware.

  Read the following User License Agreement ("Agreement") carefully. If you do
  not agree to the terms and conditions of this Agreement, you must not download
  the Software. Downloading the Software indicates your acceptance of the terms
  and conditions of the Agreement.

-------------------------------------------------------------------------------
[ User License Agreement ]

  NEC Corporation ("NEC") grants you the right to use the Software under the 
  terms and conditions of this Agreement only in the country in which you 
  acquired the Software. You shall agree to all provisions of this Agreement 
  and assume responsibility for selection, installation, use and effect of the 
  Software purchased for your desired effect.

  1. Terms 
  1.1 This Agreement shall come into force on the date of your receipt of the 
      Software.
  1.2 You may terminate the license granted hereunder by notifying us in 
      writing at least one month prior to the desired termination date.
  1.3 NEC may terminate the license granted you hereunder at any time if you 
      fail to comply with any terms and conditions of this Agreement.
  1.4 The license to the Software shall remain in force until the license is 
      terminated on the date set forth hereunder.
  1.5 Upon termination of the license, other rights granted you hereunder 
      shall also be terminated. You must destroy or dispose of the Software, 
      any copies of the Software and manual and other materials provided with 
      the Software.

  2. Copyright 
  2.1 The Software shall solely be used on US310e.
  2.2 NEC grants you the right to use the Software only in the country in 
      which you acquired the Software in accordance with the conditions of the 
      preceding paragraph.

  3. Copying, altering, and combining of the Software
  3.1 You may only make one copy of the Software solely for a backup purpose, 
      provided, however, that the copy of the Software is loaded into 
      permanent memory of the system. You may store the Software solely to 
      prevent damages or loss of the memory media.
  3.2 You shall place the copyright notice and other legends on each copy of 
      the Software.
  3.3 You may not use, copy, alter, combine, publish, reproduce the Software 
      over the Internet, or otherwise dispose of the Software except as 
      provided in this Agreement.
  3.4 You may not copy, publish the manual or other related documentation 
      provided with the Software, or reproduce such manual and documentation 
      over the Internet.
  3.5 No intangible property right to the Software shall be transferred to you.

  4. Transfer
  4.1 You may assign your rights granted hereunder to a third party only if 
      all conditions below are satisfied:
      a. You shall assign and shall not retain this Agreement, the Software, 
         all copies of the Software, or the manual or other related 
         documentation provided with the Software. 
      b. The transferee agrees to this Agreement.
  4.2 You shall not sublicense, assign, transfer, or otherwise dispose of the 
      Software or the right of use to any third party except as provided 
      herein.

  5. Reverse compile
   You may not reverse engineer, decompile, or otherwise disassemble the 
   Software.

  6. Limitation of warranties
  6.1 The Software is provided "as is" without warranty of any kind. In no 
      event shall NEC be liable with respect to any claim by you on account of 
      or arising out of the use of the Software.
  6.2 Notwithstanding the provisions of the preceding paragraph, in case NEC 
      makes any bug-fix version to the Software, NEC will, at its expense, 
      furnish you with such bug-fix version, update version, or information in 
      relation to such bug-fix or update version both in the source code form 
      and object code form, and such bug-fix version or update version shall 
      be considered as the licensed Software.

  7. No liability 
   In no event shall NEC be liable for any indirect or consequential damages 
   or loss of profit or damages based on any third party claim, even if NEC 
   has been advised of the possibility of such damages.
 
  8. Others 
   You must agree that any disputes concerning this Agreement will be settled 
   at the Tokyo district court as the exclusively appointed court.

-------------------------------------------------------------------------------
Installation proccess
-------------------------------------------------------------------------------

Use the following procedure to install this software.

 (1) Download following files to a desired suitable location on your hard disk.
     (In this document, I will set the download path as "C:\US310e" folder as 
      an example.)

        C:\US310e
           ┟ NEC-WE8S-x64-v130-INTL-US310e.zip.001
           ┟ NEC-WE8S-x64-v130-INTL-US310e.zip.002
           ┟ NEC-WE8S-x64-v130-INTL-US310e.zip.003
           ┟ NEC-WE8S-x64-v130-INTL-US310e.zip.004
           ┟ NEC-WE8S-x64-v130-INTL-US310e.zip.005
           ┟ NEC-WE8S-x64-v130-INTL-US310e.zip.006
           ┖ NEC-WE8S-x64-v130-INTL-US310e-Other-EN.zip

 (2) Unzip NEC-WE8S-x64-v130-INTL-US310e-Other-EN.zip to a suitable location.
     The following file will be restored.

        NEC-WE8S-x64-v130-INTL-US310e-Other-EN.zip
           ┟ LICENSE-NEC.pdf
           ┟ US310e_FW_003_READ1ST_EN.txt
           ┖ NEC-WE8S-x64-v130-INTL-US310e.bat

 (3) Store NEC-WE8S-x64-v130-INTL-US310e.bat restored in step 2 in the same 
     folder as the zip file at the end of 001 to 006.

     (In this document, I will set the download path as "C:\US310e" folder as 
      an example.)

        C:\US310e
           ┟ NEC-WE8S-x64-v130-INTL-US310e.zip.001
           ┟ NEC-WE8S-x64-v130-INTL-US310e.zip.002
           ┟ NEC-WE8S-x64-v130-INTL-US310e.zip.003
           ┟ NEC-WE8S-x64-v130-INTL-US310e.zip.004
           ┟ NEC-WE8S-x64-v130-INTL-US310e.zip.005
           ┟ NEC-WE8S-x64-v130-INTL-US310e.zip.006
           ┟ NEC-WE8S-x64-v130-INTL-US310e.bat
           ┖ NEC-WE8S-x64-v130-INTL-US310e-Other-EN.zip

 (4) Run NEC-WE8S-x64-v130-INTL-US310e.bat in step 3.
     NEC-WE8S-x64-v130-INTL-US310e.zip will be created automatically, please 
     wait for a while.

      * Please wait until the command prompt is finished.

      * Can not unzip the NEC-WE8S-x64-v130-INTL-US310e.zip.001 - 006.

 (5) US310e_FW_003_READ1ST_EN.txt in step 2. Execute this software update 
     according to explanation file.

-------------------------------------------------------------------------------
[Trademarks and Copyright]

  The copyright for this software is held by Atrust Computer Corp.

  * Microsoft, Windows Server 2008/2008R2, Windows Server 2012/2012R2, 
    Windows 7, Windows 8/8.1, Windows 10 are registered trademark of 
    Microsoft Corporation in the United States and other countries.
  * All other company and product names in this document are the registered 
    trademark or trademark of their respective owners.
-------------------------------------------------------------------------------
Copyright NEC Corporation 2016