===========================================================================
RAID Report Service Ver1.0 Rev 3537 (Windows Edition)
===========================================================================
[Software name ] RAID Report Service Ver1.0 Rev 3537
[Registered name ] 032014-G04.zip
[Copyright (C) ] NEC Corporation 2017-2018
[Applicable model] Express5800/R120h-1M
Express5800/R120h-2M
Express5800/R120h-1E
Express5800/R120h-2E
Express5800/T120h
Express5800/R110j-1
[Users ] For users who will install following Windows on NEC
Express5800 series.
- Windows Server 2016
- Windows Server 2012 R2
[Software type ] Utility
[Creation method ] Windows Zip format
===========================================================================
RAID Report Service (hereinafter called "this software") is RAID System
Management Utility for the following RAID Controllers.
<RAID Controllers>
- Onboard RAID Controller
- N8103-189 RAID Controller (RAID 0/1)
- N8103-190 RAID Controller (2GB, RAID 0/1/5/6)
- N8103-191 RAID Controller (4GB, RAID 0/1/5/6)
- N8103-192 RAID Controller (RAID 0/1)
- N8103-193 RAID Controller (2GB, RAID 0/1/5/6)
- N8103-194 RAID Controller (4GB, RAID 0/1/5/6)
- N8103-195 RAID Controller (RAID 0/1)
- N8103-196 RAID Controller (4GB, RAID 0/1/5/6)
- N8103-201 RAID Controller (2GB, RAID 0/1/5/6)
Carefully read the following user license agreement for NEC software
before using this software.
If you do not agree to the terms of the agreement, do not download this
software. By downloading this software, you agree to be bound by the terms
of the agreement.
[User license agreement for NEC software]
This user license agreement is an agreement between you and NEC Corporation
(hereinafter called "NEC").
Under the following terms of this agreement, NEC grants you the right to
use the software program (hereinafter called "licensed program"), and you
are to agree to the terms. You are to take responsibilities for the choice,
installation, or use of the licensed program, or the results of the usage
of the usage of the licensed program.
1. Term
(1) This user license agreement goes into effect on the day you receive
this software product.
(2) You may terminate the right to use the licensed program under this
license agreement at any time by giving NEC a month's or longer notice
by letter.
(3) NEC may terminate your right to use the licensed program at any time,
if you fail to comply with the terms of this user license agreement.
(4) Your right to use the licensed program continues to exist until it
terminates in accordance with the provisions of this user license
agreement.
(5) When your right to use the licensed program terminates, all of your
other rights under this user license agreement also terminate. You must
destroy the licensed program, all the copies of the licensed program,
and the related documents (e.g., manuals) provided with the licensed
program as soon as your right to use the licensed program terminates.
2. Use right
You may use the licensed program only on NEC Express5800 servers using
Windows as follows.
- Windows Server 2016
- Windows Server 2012 R2
3. Copy, alteration, and linkage of the licensed program
(1) You may make a copy of the licensed program only to use it as a backup
copy in case the program data is lost or destroyed. However, this is
not the case if the licensed program is installed in fixed storage.
In this case, you may keep it only to use in case the storage medium of
the licensed program is lost or destroyed.
(2) You must give the expressions of the copyright of the licensed program
and other rights to all the copies of the licensed program.
(3) Unless otherwise specified in this user license agreement, you may not
use, copy, alter, or link the licensed program, you may not reproduce
it in publications or networks, or you may not make your own decision
on handling it in any other ways.
(4) You may not copy the related documents (e.g., manuals) provided with
the licensed program or reproduce them in publications or networks
under any circumstances.
(5) This user license agreement is not to transfer the intellectual
property for the licensed program to you.
4. Transfer of the licensed program
(1) You may transfer all of your rights under this user license agreement
only if satisfying all the following condition:
(a) You are to transfer this user license agreement, the licensed program,
all the copies of the licensed program, and the related documents
(e.g., manuals) provided with the licensed program, and retain none of
them.
(b) The recipient agrees to the terms of this user license agreement.
(2) Unless otherwise specified in this user license agreement, you may not
loan or transfer the licensed program or the right to use it to a third
party, or you may not make your own decision on handling it in any
other ways.
5. Decompilation
You may not reverse engineer, decompile, or disassemble the licensed program.
6. Term of a guarantee
(1) NEC does not give any guarantee for the licensed program. You are to be
liable and to pay for problems arising from the use of the licensed
program.
(2) Irrespective of the term (1), when NEC corrects licensed-program errors
(bugs), NEC may, at its discretion, provide an error-corrected program,
a program for correction (hereinafter called a modification program),
or information for correction by an NEC-decided method. The modification
program provided to you is regarded as the licensed program.
7. No liability
NEC assumes no liability for your lost profit, damages arising from
special circumstances (including damages which NEC can or could foresee),
or damages you are asked for by any third party.
8. Others
Disputes over this user license agreement are to be settled at the Tokyo
District Court as the exclusively agreed competent court.
---------------------------------------------------------------------------
[Setup Procedure]
A user having the administrator authority should install or uninstall the
RAID Report Service in the computer. Only users having the administrator
authority can execute the setup program.
When RAID Report Service is installed already, please refer to [Uninstallation
Procedure] and uninstall. If uninstallation is completed, please refer to
[Installation Procedure] and install.
[Installation Procedure]
(1) Download the archive "032014-G04.zip".
(2) Copy the archive to any folder in the server in which this software
will be installed.
(3) The archive "032014-G04.zip" is in the Windows ZIP format.
After extracting the archive, the following files will appear.
- RAID Report Service Ver1.0 Installation Image
- Setup.exe - RAID Report Service Setup Program
(4) Right click Windows button. Click [Run...], [Browse...].
Click Setup.exe in the folder contained the installation image of RAID
Report Service and click [Open] in the [Browse] dialog box.
Recognize that displays "Setup.exe" in [Name] box on [Run] dialog box
and click [OK].
(5) The installation starts the InstallShield Wizard of the RAID Report
Service.
Go through the following messages to install.
(6) At the completion of the installation, the "InstallShield Wizard
Complete" screen appears. Click [Finish].
(7) When the installation completes, "RAID Report Service" is registered
to the program list in the [Programs and Features].
(8) It isn't necessary to do a reboot.
[Uninstallation Procedure]
(1) The clicking [Uninstall] on "RAID Report Service" program in the list of
[Programs and Features].
(2) The uninstallation starts the InstallShield Wizard of the RAID Report
Service.
Go through the following messages to uninstall.
(3) At the completion of the uninstallation, the wizard appears as shown
in the figure to the right. Click [Finish].
(4) If the uninstallation completes, "RAID Report Service" is deleted
from the list of [Programs and Features].
(5) It isn't necessary to do a reboot.
---------------------------------------------------------------------------
[General Notice]
(1) About version check.
<File>
C:\Program Files\RAID Report Service\server\version.txt
<Method>
Check the "Revision".
<Example>
Revision: 3537
---------------------------------------------------------------------------
[Revision History]
2018/12/26 Ver1.0 Rev 3537
"Enhancement"
1. Additional support of the applicable model
- Express5800/R110j-1
2018/10/9 Ver1.0 Rev 3537
"Enhancement"
1. It supports the latest firmware(iLo1.38)
2018/9/18 Ver1.0 Rev 3537
"Enhancement"
1. It supports the latest firmware(iLo1.35)
2018/3/27 Ver1.0 Rev 3537
"Enhancement"
1. It supports the latest firmware(iLo1.20 or later)
2017/12/4 Ver1.0 Rev 3497
"Enhancement"
1. The correction which doesn't make "Smart array SAS/SATA event
report service" start.
"Remediation"
1. "SSD Endurance Remaining" alert early was corrected.
2. No alert by HDD/SSD beyond 1.2TB was corrected.
2017/8/23 Ver1.0 Rev 3459
First version released.
---------------------------------------------------------------------------
[Attached Files]
size date filename
--------+-------------------+-----------------------------------
6248104 2018-03-07 10:30:32 032014-G04.zip
You can check the integrity of the downloaded file by comparing the
following values in the md5sum column and the MD5 checksums of the files
you have downloaded. If the checksums do not match, it means an error
occurred during download.
md5sum filename
--------------------------------+-------------------------------
ef88bcf1880d3424872c92582f84c604 032014-G04.zip
- 032014-G04.zip
size date filename
--------+-------------------+-----------------------------------
7018992 2018-01-26 09:01:14 Setup.exe
---------------------------------------------------------------------------
[Trademarks and Copyright]
The copyright for this software is held by NEC.
*Microsoft, Windows and Windows Server are either registered trademarks or
trademarks of Microsoft Corporation in the United States and/or other
countries.
*All other company and product names in this document are the registered
trademarks or trademarks of their respective owners.
---------------------------------------------------------------------------
Copyright NEC Corporation 2017-2018