===========================================================================
Universal RAID Utility Ver5.0 (Windows Edition)
for NEC Express5800/Scalable HA Server
===========================================================================
[Software name ] Universal RAID Utility Ver5.0
[Registered name ] 056271-G01_637001875111443438.zip
uru50_eug_compG.zip
[Copyright (C) ] NEC Corporation 2007-2019
[Applicable model] Express5800/A1040e
Express5800/A2040e
[Users ] For users who will install following Windows on NEC
Express5800 series.
- Windows Server 2019
[Software type ] Utility
[Creation method ] Windows Zip format
===========================================================================
[Software Introduction]
Universal RAID Utility (hereinafter called "this software") is RAID System
Management Utility for the following RAID Controllers.
<RAID Controllers>
- NE3303-177 RAID Controller (1GB, RAID 0/1/5/6)
- NE3303-178 RAID Controller (2GB, RAID 0/1/5/6)
- NE3303-H004 RAID Controller (2GB, RAID 0/1/5/6)
Carefully read the following user license agreement for NEC software
before using this software.
If you do not agree to the terms of the agreement, do not download this
software. By downloading this software, you agree to be bound by the terms
of the agreement.
[User license agreement for NEC software]
This user license agreement is an agreement between you and NEC Corporation
(hereinafter called "NEC").
Under the following terms of this agreement, NEC grants you the right to
use the software program (hereinafter called "licensed program"), and you
are to agree to the terms. You are to take responsibilities for the choice,
installation, or use of the licensed program, or the results of the usage
of the usage of the licensed program.
1. Term
(1) This user license agreement goes into effect on the day you receive
this software product.
(2) You may terminate the right to use the licensed program under this
license agreement at any time by giving NEC a month's or longer notice
by letter.
(3) NEC may terminate your right to use the licensed program at any time,
if you fail to comply with the terms of this user license agreement.
(4) Your right to use the licensed program continues to exist until it
terminates in accordance with the provisions of this user license
agreement.
(5) When your right to use the licensed program terminates, all of your
other rights under this user license agreement also terminate. You must
destroy the licensed program, all the copies of the licensed program,
and the related documents (e.g., manuals) provided with the licensed
program as soon as your right to use the licensed program terminates.
2. Use right
You may use the licensed program only on NEC Express5800 servers using
Windows as follows.
- Windows Server 2019
3. Copy, alteration, and linkage of the licensed program
(1) You may make a copy of the licensed program only to use it as a backup
copy in case the program data is lost or destroyed. However, this is
not the case if the licensed program is installed in fixed storage.
In this case, you may keep it only to use in case the storage medium of
the licensed program is lost or destroyed.
(2) You must give the expressions of the copyright of the licensed program
and other rights to all the copies of the licensed program.
(3) Unless otherwise specified in this user license agreement, you may not
use, copy, alter, or link the licensed program, you may not reproduce
it in publications or networks, or you may not make your own decision
on handling it in any other ways.
(4) You may not copy the related documents (e.g., manuals) provided with
the licensed program or reproduce them in publications or networks
under any circumstances.
(5) This user license agreement is not to transfer the intellectual
property for the licensed program to you.
4. Transfer of the licensed program
(1) You may transfer all of your rights under this user license agreement
only if satisfying all the following condition:
(a) You are to transfer this user license agreement, the licensed program,
all the copies of the licensed program, and the related documents
(e.g., manuals) provided with the licensed program, and retain none of
them.
(b) The recipient agrees to the terms of this user license agreement.
(2) Unless otherwise specified in this user license agreement, you may not
loan or transfer the licensed program or the right to use it to a third
party, or you may not make your own decision on handling it in any
other ways.
5. Decompilation
You may not reverse engineer, decompile, or disassemble the licensed program.
6. Term of a guarantee
(1) NEC does not give any guarantee for the licensed program. You are to be
liable and to pay for problems arising from the use of the licensed
program.
(2) Irrespective of the term (1), when NEC corrects licensed-program errors
(bugs), NEC may, at its discretion, provide an error-corrected program,
a program for correction (hereinafter called a modification program),
or information for correction by an NEC-decided method. The modification
program provided to you is regarded as the licensed program.
7. No liability
NEC assumes no liability for your lost profit, damages arising from
special circumstances (including damages which NEC can or could foresee),
or damages you are asked for by any third party.
8. Others
Disputes over this user license agreement are to be settled at the Tokyo
District Court as the exclusively agreed competent court.
---------------------------------------------------------------------------
[Installation Procedure]
Please extract the installation image and then start installation.
Refer to the "Universal RAID Utility User's Guide" which is contained in
the installation image for the detailed procedure of the installation.
(1) Download the archives "056271-G01_637001875111443438.zip" and
"uru50_eug_compG.zip".
(2) Copy the archives to any folder in the server in which this software
will be installed.
(3) The archives "056271-G01_637001875111443438.zip" and "uru50_eug_compG.zip"
are in the Windows ZIP format.
After extracting the archives, the following files will appear.
- Universal RAID Utility Ver5.0 Installation Image
056271-G01_637001875111443438 folder
- windows folder
- Setup.exe - Universal RAID Utility Setup Program
- eci folder - Setup Program related modules
- Universal RAID Utility Update Tool - for ExpressUpdate
- Universal RAID Utility User's Guide
- uru50eug.pdf - User's Guide
- uru50euga.pdf - Appendix A : Glossary
- uru50eugb.pdf - Appendix B : raidcmd Command Reference
- uru50eugc.pdf - Appendix C : Logs/Events
(4) To install this software, please refer to the section [Installation
and Uninstallation] in "Universal RAID Utility User's Guide".
---------------------------------------------------------------------------
[General Notice]
1. The RAID Viewer and the Log Viewer are not available in Windows Server
2019 Server Core.Use raidcmd with the administrative right.
2. The maximum number of IP addresses on OS that can be enabled in the
computer is 42.
Universal RAID Utility cannot communicate with NEC ESMPRO Manager if more
than 42 IP addresses are set enabled.
3. The TCP ports Universal RAID Utility uses have been changed in Ver2.61 and
the later versions as follows.
data port - 52805(Ver2.6 and earlier) - 5016(Ver2.61 and later)
event port - 52806(Ver2.6 and earlier) - 5017(Ver2.61 and later)
raidsrv Agent - 52807(Ver2.6 and earlier) - 5018(Ver2.61 and later)
The change has no effect on operations of Universal RAID Utility.
In the following cases, however, you must change the settings of Universal
RAID Utility depending on your environment settings. Be sure to check the
description in [TCP ports used by Universal RAID Utility] in the Universal
RAID Utility User's Guide.
(1) You customized the TCP ports Universal RAID Utility uses and you would
like to continue using them, and/or
(2) You are going to update Universal RAID Utility from Ver2.6 or earlier
versions to Ver2.61 or later versions using ExpressUpdate.
Also you must change the settings of other applications in the following
cases. Be sure to check the description in [TCP ports used by Universal
RAID Utility] in the Universal RAID Utility User's Guide.
(1) You have specified the TCP port numbers Universal RAID Utility uses
for the firewall settings, and/or
(2) Other applications in you environment have been using the TCP ports,
5016, 5017, and 5018.
4. Notes on use of function to Make/Remove Hot Spare by NEC ESMPRO Manager
You can use this function only NEC ESMPRO Manager Ver. 5.72 or later.
---------------------------------------------------------------------------
[Revision History]
2019/8/7 Ver5.0 Rev.3595
First version released.
"Enhancement"
1. Additional support of the following OS
- Windows Server 2019
---------------------------------------------------------------------------
[Attached Files]
size date filename
--------+-------------------+----------------------------------------------
36846784 2019-07-31 16:38:07 056271-G01_637001875111443438.zip
2659601 2019-06-05 10:16:46 uru50_eug_compG.zip
You can check the integrity of the downloaded file by comparing the
following values in the md5sum column and the MD5 checksums of the files
you have downloaded. If the checksums do not match, it means an error
occurred during download.
md5sum filename
---------------------------------+-----------------------------------------
2c56d7647f318e1026c7f3e1a853f02c 056271-G01_637001875111443438.zip
db10ee00adcef9499bc2d24dc93ef796 uru50_eug_compG.zip
- 056271-G01_637001875111443438.zip
date size filename
------------------+----------------+---------------------------------
2011/05/13 20:11 509 setup.iss
2019/07/31 16:36 146 ExUpHash.xml
2019/07/31 16:36 5,106 ExUpInfo.xml
2011/05/09 11:09 37 uruSetup.bat
2019/07/31 09:30 3,258 readme_jp.txt
2019/07/31 09:31 3,200 readme_en.txt
2013/02/19 21:16 11,867 uruSetup.js
2018/07/05 14:03 13,066,128 windows/Setup.exe
2016/07/19 17:10 8,192 windows/eci/1033.mst
2016/07/19 17:10 318 windows/eci/setup.iss
2016/07/19 17:10 2,243,470 windows/eci/ISSetup.dll
2016/07/19 17:10 328,704 windows/eci/ExpressUpdate Agent.msi
2016/07/19 17:10 197 windows/eci/update.iss
2016/07/19 17:10 4,214,054 windows/eci/Data1.cab
2016/07/19 17:10 36,352 windows/eci/1041.mst
2016/07/19 17:10 2,330,422 windows/eci/setup.exe
2016/07/19 17:10 3,919,945 windows/eci/src/libiconv-1.9.2.tar.gz
2016/07/19 17:10 8,247,659 windows/eci/src/axis2c-src-1.6.0.zip
2016/07/19 17:10 1,172 windows/eci/src/axis2c-src-1.6.0.patch
2016/07/19 17:10 6,331 windows/eci/src/openslp-2.0.beta1.patch
2016/07/19 17:10 554 windows/eci/src/axis2c-1.6.0.patch
2016/07/19 17:10 381 windows/eci/src/readme.txt
2016/07/19 17:10 5,642,684 windows/eci/src/openslp-2.0.beta1.zip
2016/07/19 17:10 45 windows/eci/src/revision.txt
2016/07/19 17:10 6,406 windows/eci/doc/OpenSSL_license.txt
2016/07/19 17:10 1,249 windows/eci/doc/zlib_license.txt
2016/07/19 17:10 1,686 windows/eci/doc/OpenSLP_license.txt
2016/07/19 17:10 568 windows/eci/doc/ApacheNotice.txt
2016/07/19 17:10 3,458 windows/eci/doc/OpenSLP_EULA.txt
2016/07/19 17:10 1,162 windows/eci/doc/MIT_license.txt
2016/07/19 17:10 2,244 windows/eci/doc/OpenSSL_WOILA.txt
2016/07/19 17:10 11,560 windows/eci/doc/ApacheLicense_v2.txt
2016/07/19 17:10 25,283 windows/eci/doc/LGPL_v2.txt
- uru50_eug_compG.zip
date size filename
------------------+----------------+---------------------------------
2019/06/03 17:29 2,337,627 uru50_eug.pdf
2015/10/09 14:18 78,843 uru50_euga.pdf
2015/10/09 14:21 202,140 uru50_eugb.pdf
2018/02/27 12:42 449,379 uru50_eugc.pdf
---------------------------------------------------------------------------
[Trademarks and Copyright]
The copyright for this software is held by NEC.
*Microsoft, Windows and Windows Server are either registered trademarks or
trademarks of Microsoft Corporation in the United States and/or other
countries.
*All other company and product names in this document are the registered
trademarks or trademarks of their respective owners.
---------------------------------------------------------------------------
Copyright NEC Corporation 2007-2019