===============================================================================
N8190-165/166/167/168 Fibre Channel Controller
Firmware Update Module (for Windows)
===============================================================================
Software name : N8190-165/166/167/168 Fibre Channel Controller
Firmware Update Module (for Windows)
Registered name : FC_Q_FW-ALL_win_en.zip
Models : NEC Express5800/R120h-1M, R120h-2M, R120h-1E, R120h-2E,
T120h
Users : For users who will use N8190-165/166/167/168 Fibre Channel
Controller on NEC Express5800 series.
Type of software : Firmware Module
File Type : zip file
===============================================================================
[ About the software ]
N8190-165/166/167/168 Fibre Channel Controller Firmware Update Module
(for Windows) (hereinafter referred to as "the software") is used
for updating the firmware of N8190-165/166/167/168 Fibre Channel Controllers
as the following versions on Windows Server OS.
01.70.47 -> 01.71.47
01.70.51 -> 01.71.51
01.70.66 -> 01.71.66
01.70.85 -> 01.71.85
01.71.03 -> 01.72.03
01.72.02 -> 01.72.03
01.73.07 -> 01.73.08
[ Target ]
Target Fibre Channel Controller, Firmware version and Operating System of the
Module, are as follows.
- Fibre Channel Controller:
N8190-165 Fibre Channel Controller (1ch)
N8190-166 Fibre Channel Controller (2ch)
N8190-167 Fibre Channel Controller (1ch)
N8190-168 Fibre Channel Controller (2ch)
- Firmware version :
01.70.47
01.70.51
01.70.66
01.70.85
01.71.03
01.72.02
01.73.07
- Operating System:
Windows Server 2012 R2 Standard
Windows Server 2012 R2 Datacenter
Windows Server 2016 Standard
Windows Server 2016 Datacenter
Windows Server 2019 Standard
Windows Server 2019 Datacenter
[ Fix in 01.70.47, 01.70.51, 01.70.66, 01.70.85, 01.72.03, 01.72.02, 01.73.07 ]
Fixed the issue that these products have the potential of causing the
file-system data integrity issue on the connected storage in very rare case.
[ How to confirm the Fibre Channel Controller Firmware version ]
Confirm the firmware version by one of the following procedures.
[ System Utilities ]
1) Startup the System Utilities by press F9 key in POST.
2) Select the System Configuration.
3) Select the target Fibre Channel Controller.
Following is the list of the Part Number and the name of Fibre Channel
Controller.
N8190-165 : SN1100Q 1P
N8190-166 : SN1100Q 2P
N8190-167 : SN1600Q 1P
N8190-168 : SN1600Q 2P
4) Select the Controller Information
5) Confirm the [Firmware Version].
[ iLO web interface ]
1) Connect to the target Server via iLO web interface.
2) Select "Firmware & OS Software - Installed Firmware"
3) Confirm the [Firmware Name] and [Firmware Version] of the Fibre Channel
Controller.
Following is the list of the Part Number and the name of Fibre Channel
Controller.
N8190-165 : SN1100Q 1P
N8190-166 : SN1100Q 2P
N8190-167 : SN1600Q 1P
N8190-168 : SN1600Q 2P
** NOTE **
Incorrect update could result in the problems such as failure to boot the
system. Read through the instructions in this document carefully fort
performing the update to prevent erroneous operation. When the system
malfunctions or the power is disconnected during the update due to unexpected
accidents such as power failure, lightning strike, power interruption and
noise, it may result in damage to the device and system malfunction in the
worst case. Please note that in such cases, repair may be required at your
cost.
Please read the following User License Agreement ("Agreement") carefully.
If you do not agree to the terms and conditions of this Agreement, you shall
not download the Software. Downloading the Software indicates your acceptance
of the terms and conditions of the Agreement.
[ User license agreement for NEC software ]
This user license agreement is an agreement between you and NEC Corporation
(hereinafter called "NEC").
Under the following terms of this agreement, NEC grants you the right to
use the software program (hereinafter called "licensed program"), and you
are to agree to the terms. You are to take responsibilities for the choice,
installation, or use of the licensed program, or the results of the usage
of the usage of the licensed program.
1. Terms
1.1 This Agreement shall come into force on the date of your receipt of the
Software.
1.2 You may terminate the license granted hereunder by notifying us in
writing at least one month prior to the desired termination date.
1.3 NEC may terminate the license granted you hereunder at any time if you
fail to comply with any terms and conditions of this Agreement.
1.4 The license to the Software shall remain in force until the license is
terminated on the date set forth hereunder.
1.5 Upon termination of the license, other rights granted you hereunder shall
also be terminated. You must destroy or dispose of the Software, any
copies of the Software and manual and other materials provided with the
Software.
2. Copyright
2.1 The Software shall solely be used in the NEC Express5800 servers.
2.2 NEC grants you the right to use the Software only in the country in which
you acquired the Software in accordance with the conditions of the
preceding paragraph.
3. Copying, altering, and combining of the Software
3.1 You may only make one copy of the Software solely for a backup purpose,
provided, however, that the copy of the Software is loaded into permanent
memory of the system. You may store the Software solely to prevent
damages or loss of the memory media.
3.2 You shall place the copyright notice and other legends on each copy of
the Software.
3.3 You may not use, copy, alter, combine, publish, reproduce the Software
over the Internet, or otherwise dispose of the Software except as
provided in this Agreement.
3.4 You may not copy, publish the manual or other related documentation
provided with the Software, or reproduce such manual and documentation
over the Internet.
3.5 No intangible property right to the Software shall be transferred to you.
4. Transfer
4.1 You may assign your rights granted hereunder to a third party only if all
conditions below are satisfied:
a. You shall assign and shall not retain this Agreement, the Software,
all copies of the Software, or the manual or other related
documentation provided with the Software.
b. The transferee agrees to this Agreement.
4.2 You shall not sublicense, assign, transfer, or otherwise dispose of the
Software or the right of use to any third party except as provided
herein.
5. Reverse compile
You may not reverse engineer, decompile, or otherwise disassemble the
Software.
6. Limitation of warranties
6.1 The Software is provided "as is" without warranty of any kind. In no
event shall NEC be liable with respect to any claim by you on account of
or arising out of the use of the Software.
6.2 Notwithstanding the provisions of the preceding paragraph, in case NEC
makes any bug-fix version to the Software, NEC will, at its expense,
furnish you with such bug-fix version, update version, or information in
relation to such bug-fix or update version both in the source code form
and object code form, and such bug-fix version or update version shall be
considered as the licensed Software.
7. No liability
In no event shall NEC be liable for any indirect or consequential damages
or loss of profit or damages based on any third party claim, even if NEC
has been advised of the possibility of such damages.
8. Others
You must agree that any disputes concerning this Agreement will be settled
at the Tokyo district court as the exclusively appointed court.
===============================================================================
[ How to update the Fibre Channel Controller firmware ]
===============================================================================
Perform the following steps to apply the Fibre Channel Controller firmware.
[How to apply]
1) Extract the download zip file to any folder.
2) Apply the firmware by the update procedure(readme_en.pdf) and the update
module.
--------------------------------------------------------------------------------
[ Update history ]
Mar.6 2020 Firmware Version 01.71.47, 01.71.51, 01.71.66 01.71.85,
01.72.03, 01.73.08
Fixed the issue that these products have the potential of causing the
file-system data integrity issue on the connected storage in very rare case.
Sep.30 2019 Firmware Version 01.72.02
Fixed the following
1)When use SFP+ module of the specific vender, the Fibre Channel Controller
will fail to linkup.
--------------------------------------------------------------------------------
[ Trademarks and Copyright ]
The copyright for this software is held by NEC.
*Microsoft, Windows and Windows Server are either registered trademarks or
trademarks of Microsoft Corporation in the United States and/or other
countries.
*All other company and product names in this document are the registered
trademarks or trademarks of their respective owners.
-------------------------------------------------------------------------------
Copyright NEC Corporation 2020