=========================================================================================================
Software name : NEC Express5800/100 Series NEC System Management Controller driver
Software revisions: See below
OS : Windows Server (R) 2008(x86/x64)
Windows Server (R) 2008 R2
Windows Server (R) 2012
Type of software : driver
---------------------------------------------------------------------------------------------------------
[ About the software ]
This "NEC System Management Controller driver (ver 6.1.2.50)" (It's called
"this software" in the following.), for Windows Server 2008, Windows Server
2008 R2, Windows Server 2012 will make the enhancements or solve the issues
for NEC Express5800 server products as below.
ESMPRO/ServerAgent (server management software) uses this software.
The following change was performed by this version.
-- Improvement of the WDT (WatchDogTimer) compulsion stop function
Note:
- This software does not support virtualization environment.
[ Models and software revisions to update ]
Users who use the following server models and software versions need update:
- Models to update:
Express5800/GT110d, GT110d-S, E110d-1, R110d-1E
Express5800/R120d-1M, R120d-2M, R120e-1M,R120e-2M
Express5800/R110d-1M, R120d-1E, R120d-2E
Express5800/T110d, T120d, GT110d
Express5800/E120d-M, E120d-1, E110d-M
Express5800/GT110f, GT110f-S, T110f-E, T110f-S, R110f-1E
Express5800/B120d-h, B120d, B120e-h,B110d
Express5800/V608-L, V608-H, V618-L, V618-H, V628-L, V628-H
Express5800/A1020a
iStorage NS100Tb, NS300Rb, NS300Tc, NS500Rc
- Software versions to update:
·6.1.2.0
·6.1.2.11
- How to confirm your software version:
1) a device manager is started from a Control Panel.
2) "NEC System Management Controller" of a system device.
Please right-click and choose a properties.
3) when [6.1.2.0] or [6.1.2.11] is shown to the version on the driver tag screen.
The software version of the target.
Please read the following User License Agreement ("Agreement") carefully.
If you do not agree to the terms and conditions of this Agreement, you shall not download the Software.
Downloading the Software indicates your acceptance of the terms and conditions of the Agreement.
[User License Agreement]
NEC Corporation ("NEC") grants you the right to use the software program ("Software") under the terms
and conditions of this Agreement only in the country in which you acquired the Software. You shall
agree to all provisions of this Agreement and assume responsibility for selection, installation, use
and effect of the Software purchased for your desired effect.
<Agreement for the Software>
1. Terms
1.1 This Agreement shall come into force on the date of your receipt of the Software.
1.2 You may terminate the license granted hereunder by notifying us in writing at least one month
prior to the desired termination date.
1.3 NEC may terminate the license granted you hereunder at any time if you fail to comply with any
terms and conditions of this Agreement.
1.4 The license to the Software shall remain in force until the license is terminated on the date
set forth hereunder.
1.5 Upon termination of the license, other rights granted you hereunder shall also be terminated.
You must destroy or dispose of the Software, any copies of the Software and manual and other
materials provided with the Software.
2. Copyright
2.1 The Software shall solely be used in the NEC Express5800 servers.
2.2 NEC grants you the right to use the Software only in the country in which you acquired the
Software in accordance with the conditions of the preceding paragraph.
3. Copying, altering, and combining of the Software
3.1 You may only make one copy of the Software solely for a backup purpose,
provided, however, that the copy of the Software is loaded into permanent memory of the system.
You may store the Software solely to prevent damages or loss of the memory media.
3.2 You shall place the copyright notice and other legends on each copy of the Software.
3.3 You may not use, copy, alter, combine, publish, reproduce the Software over the Internet, or
otherwise dispose of the Software except as provided in this Agreement.
3.4 You may not copy, publish the manual or other related documentation provided with the Software,
or reproduce such manual and documentation over the Internet.
3.5 No intangible property right to the Software shall be transferred to you.
4. Transfer
4.1 You may assign your rights granted hereunder to a third party only if all conditions below are
satisfied:
a. You shall assign and shall not retain this Agreement, the Software, allcopies of the
Software, or the manual or other related documentationprovided with the Software.
b. The transferee agrees to this Agreement.
4.2 You shall not sublicense, assign, transfer, or otherwise dispose of the Software or the right of
use to any third party except as provided herein.
5. Reverse compile
You may not reverse engineer, decompile, or otherwise disassemble the Software.
6. Limitation of warranties
6.1 The Software is provided "as is" without warranty of any kind. In no event shall NEC be liable
with respect to any claim by you on account of or arising out of the use of the Software.
6.2 Notwithstanding the provisions of the preceding paragraph, in case NEC makes any bug-fix version
to the Software, NEC will, at its expense, furnish you with such bug-fix version, update version,
or information in relation to such bug-fix or update version both in the source code form and
object code form, and such bug-fix version or update version shall be considered as the licensed
Software.
7. No liability
In no event shall NEC be liable for any indirect or consequential damages or loss of profit or
damages based on any third party claim, even if NEC has been advised of the possibility of such
damages.
[ Installation procedures ]
To install this software, please log on with administrator permission.
(1) Close all running applications.
(2) Download this software and save it on the hard disk.
(3) Unzip the downloaded file.
(4) Move to a directory of the following each OS and
double-click dpst_x86.exe or dpst_x64.exe.
OS Directory
Windows Server 2008(x86): NECdrv\wdtWS2008x86
Windows Server 2008(x64): NECdrv\wdtWS2008x64
Windows Server 2008R2 : NECdrv\wdtWS2008R2
Windows Server 2012 : NECdrv\wdtWS2012R1
---------------------------------------------------------------------------------------------------------
[ Revision history ]
* January, 2014 (ver 6.1.2.50)
-- Improvement of the WDT (WatchDogTimer) compulsion stop function
---------------------------------------------------------------------------------------------------------
[ Legal notices (trademarks and copyrights) ]
The copyright for this software is held by NEC.
*ESMPRO is a registered trademark of NEC Corporation.
*Microsoft, Windows, Windows Vista, and Windows Server are registered
trademark of US Microsoft Corporation in the United States and other
countries.
*All other company and product names in this document are the registered
trademark or trademark of their respective owners.
---------------------------------------------------------------------------------------------------------
Copyright NEC Corporation 2014