--------------------------------------------------------------------------------
                            NEC ESMPRO Manager Update
--------------------------------------------------------------------------------
 [ Software name ]  NEC ESMPRO Manager
 [ Registered name ]  Update.zip
 [ Copyright (C) ]  NEC Corporation 2021
 [ Target versions ]
               NEC ESMPRO Manager Ver6.37 to Ver6.56
 [ Software type ]  Application software
 [ Creation method ]  Zip

--------------------------------------------------------------------------------
[ Software introduction ]

This update updates the Apache Log4j module included in NEC ESMPRO Manager.


--------------------------------------------------------------------------------
[ User license agreement for NEC software ]
This user license agreement is an agreement between you and the NEC Corporation
(hereinafter referred to as NEC). Under the following terms of agreement, NEC
grants you the right to utilize this software program (hereinafter referred to as
"licensed program"), but the customer will be bound to these to the terms.
NEC will not be held liable for the use, installation, or the results of the use
of the licensed program.

1. Terms
(1) This user license agreement takes effect from the day the software product is
    received by the user.
(2) You may terminate your rights to use the licensed program under this user
    license agreement at any time, by notifying NEC, in writing, at least one month
    or longer prior to the requested date of termination.
(3) NEC reserves the right to terminate this license agreement if you violate any
    of the provisions in this agreement.
(4) Your rights to use the licensed program will continue until it is terminated
    in accordance with the provisions stated in this license agreement.
(5) If the agreement is terminated for any reason by either party, you are
    required to destroy the software, copies of the software and its manuals and
    media, or return them to NEC immediately.

2. Usage right
You may use the licensed program only on NEC Express5800 series or management
computers.

3. Copying, altering, and combining of the licensed program
(1) You are granted the permission to create on copy of the licensed program to
    use as a backup in case the program data becomes lost, damaged or destroyed.
    Once the licensed program is loaded into memory on a PC, a copy of the program
    may be stored only as backup incase the fixed memory of the PC becomes damaged
    or lost.
(2) The copyrights and license agreement must be attached to all copies of the
    licensed program.
(3) Unless otherwise specified in this user license agreement, you may not use,
    copy, alter the licensed program or combine it with another module. It may
    not reproduced in any publications or networks. The handling of the licensed
    program and/or documents must strictly follow the terms and conditions of
    this license agreement, and at no time shall it be handled in any other terms.
(4) All related documents (e.g., manuals) provided with the licensed program may
    not be copied, altered or reproduced in any publications or networks, under
    any circumstances.
(5) This user license agreement does not transfer the intellectual property of
    the licensed program to the user.

4. Transfer of the licensed program
(1) All rights of this license agreement may be transferred to another party ONLY
    when the following conditions are satisfied:
    (a) All materials including the licensed program, all copies of the licensed
        program, this license agreement, and all other related documents are
        transferred to the other party, and no material concerning the licensed
        program is retained by you.
    (b) The recipient party agrees to conform to the terms of this user license
        agreement.
(2) Unless otherwise specified in this user license agreement, the licensed
    program or rights for its use may not be transferred to a third party.
    All matters concerning the transferring of the rights and program must
    strictly follow the terms and conditions included in this license agreement.

5. Decompilation
You may not reverse engineer, decompile, or disassemble the licensed program.

6. Term of a guarantee
(1) NEC makes no warranties, expressed or implied concerning this licensed program,
    and will at no time, be held liable to pay for any expenses which may be
    incurred, should a problem result from the use of the licensed program.
(2) Regardless of the terms stated above in term (1), upon correction of the
    licensed program errors (bugs), NEC may, at its own discretion, release an
    update patch for error-correction (hereinafter referred to as modification
    program), or information, including NEC approved method of error correction.
    The modification program provided to you will be regarded as the licensed
    program, and will follow the terms and conditions of this license agreement.

7. No liability
In no event shall NEC be held responsible for any indirect, direct or
consequential damages (including damages which NEC can or can not foresee) which
may be claimed to you by a third party.

8. Others
The user must agree that any disputes concerning this user license agreement will
be settled at the Tokyo district court as the exclusively appointed court.


===================================================================
About External Libraries which this product uses
===================================================================

This product contains libraries ("External Libraries") provided by the third party
suppliers("Suppliers"). Please assume and agree these libraries' licence documents
and NOTICE files before using this product.

Licence documents and NOTICE files of "External Libraries" are stored in the following folders.

      *\ESMWEB\wbserver
      *\ESMWEB\wbserver\webapps\axis2\WEB-INF\lib
      *\ESMWEB\wbserver\webapps\esmpro\WEB-INF\lib
      * LICENSE under the\ESMWEB\java\r1\legal

"External Libraries" are listed in "External Libraries and their Copyright" in
"NEC ESMPRO Manager Ver.6 Installation Guide".
Notwithstanding any of the terms in the Agreement or any other agreement You
may have with NEC:

a) "Suppliers" provide the libraries WITHOUT WARRANTIES OF ANY KIND and, such
   Suppliers DISCLAIM ANY AND ALL EXPRESS AND IMPLIED WARRANTIES AND CONDITIONS
   INCLUDING,
   BUT NOT LIMITED TO, THE WARRANTY OF TITLE, NON-INFRINGEMENT OR INTERFERENCE
   AND THE IMPLIED WARRANTIES AND CONDITIONS OF MERCHANTABILITY AND FITNESS FOR
   A PARTICULAR PURPOSE, WITH RESPECT TO THE EXTERNAL LIBRARIES;
b) In no event are the Suppliers liable for any direct, indirect, incidental,
   special, exemplary, punitive or consequential damages, including but not
   limited to lost data, lost savings, and lost profits, with respect to the
   External Libraries; and,

c) NEC and the Suppliers are not liable to You, and will not defend, indemnify,
   or hold You harmless for any claims arising from or related to the External
   Libraries.

--------------------------------------------------------------------------------
[ Installation procedure ]
Use the following procedure to install this software.

[ Extraction procedure ]
 1) Log onto the server as a user with administrative privileges.

 2) Run the following update program.

   Select the following batch file in Windows Explorer,
   and run it by clicking the 'Run as administrator' option
   on the right click mouse button menu.

      Update.bat

    * To run the batch file from a command prompt,
      right-click the 'command prompt' option on the [Start] menu,
      and open the command prompt by clicking the 'Run as
      administrator' option on the menu shown.

 3) Finish update

   The effect of the update will become effective immediately.
   If you see the message "Restart the system to enable the update",
   restart the system.

[How to check the result of applying the update]

 Verify that the following files are replaced.

 * According to the Windows operating system being used,
   check files under either of the following folders.

    <ESMPRO>\ESMWEB\wbserver\webapps\esmpro\WEB-INF\lib\

      File name              Date              Size
    ----------------------------------------------------
      log4j-api-2.16.0.jar   2021/12/12 23:35    301,892
      log4j-core-2.16.0.jar  2021/12/12 23:35  1,789,565

    According to the result (success or failure),
    one of the following exit codes (%errorlevel%) is returned.

     Code | Description
    ------+---------------------------------------------
       0  | Successful completion.
       1  | Not the target version of this UPDATE.
       2  | An error occurred during stopping service.
    ------+---------------------------------------------

[Notes]
 1) A version confirmation procedure of NEC ESMPRO Manager is as follows.
    Click [NEC ESMPRO] in [NEC ESMPRO Manager] under [all programs
    (program)] from [Start] menu.
    Please confirm the current version on the 'Manager' tab.

 2) The log of this update is %AppData%\SM600_YYYYMMDD-HHMM.log.
    YYYYMMDD-HHMM is date and time of run the update.


--------------------------------------------------------------------------------
[ Trademarks and copyright ]
The copyrights for this software is held by NEC.

* Microsoft, Windows, and Windows Server are registered trademarks or trademarks
  of Microsoft Corporation in the United States and other countries.
* All other product and company names are trademarks or registered trademarks of
  their respective owners.

Copyright (C) NEC Corporation 2021