NEC Express 5800 Windows® Server 2003 x64 Editions Support Kit

Windows 2003 x64 Editions is available for the above models by applying NEC Express5800 Windows Server 2003 x64 Editions Support Kit.

NEC Express5800 Windows Server 2003 x64 Editions Support Kit, downloadable from the links listed in the tables below, is a generic name of the module groups for Windows Server 2003 x64 Editions.

About Installing Windows Server 2003 x64 Editions

The installation procedure is detailed in the Install Manual downloadable from this page.
Read this manual carefully before installing NEC Express5800 Windows Server 2003 x64 Editions Support Kit.

• Download necessary driver modules for installing Windows Server 2003 x64 Editions and expand them on floppy disks or other media.
  Refer to the Install Manual or Readme.txt included in each module for details on how to expand the modules.
• Upgrade install is not allowed for Windows Server 2003 x64 Editions from the existing 32-bit edition. It must be installed anew.
• Installing Windows Server 2003 x64 Editions may fail if a magneto-optical disk drive is connected during installation process. In such a case, disconnect the drive and resume installation from the beginning. Refer to the relevant user's guide on how to connect or disconnect a magneto-optical disk drive.
• A floppy disk called OEM-FD for NEC Express5800 is required to install Windows Server 2003 x64 Editions. The OEM-FD for NEC Express5800 contains the drivers required while installing the operating system. Refer to the Install Manual on how to prepare OEM-FD for NEC Express5800.
• "EISA Configuration" (partition) may be displayed in a disk area.This is a partition for maintenance to save configutration information and utilities. This partition must not be deleted.
• In case installing N8103-75 SCSI Controller, update the SCSI driver after OS installation. Download the Driver Update Module for Adaptec Onboard SCSI [AIC-7902/AIC-7902B] and SCSI controller [N8103-75] from this page.
• The graphics accelerator driver provided by NEC Express5800 Windows Server 2003 x64 Editions Support Kit supports the Advanced Remote Management Card [N8115-02CP01]. The dedicated driver for remote KVM console function does not need to apply.
• Apply the correction module of Windows Server 2003 x64 Editions before installing the network driver, otherwise the event log may not be referenced when activating the network driver.
  
  Occurence condition: Connectiong Gigabit Ethernet Controller at line speed of 10Mbps
  Target unit: Gigabit Ethernetequipped as standard and N8104-103/109/112/113/115
  
  Contact your service representative to obtain the update module.
• Transition to hibernation state or standby state is excluded from our support.
• When power suppy is cooperating with UPS, change the AC-Link setting from "Last state" to "Power On" in the System BIOS.
• Use the EXPRESSBUILDER shipped with the main unit to install the Express Messaging Service.
  The installation procedure is detailed in the online document "Express Messaging Service Installation Guide" included in the EXPRESSBUILDER.