NEC Express5800 Server Series
Microsoft® Windows Server® 2012 Support Kit
NEC ESMPRO
NEC ESMPRO Manager
NEC ESMPRO Agent
| Module name |
Download |
| NEC ESMPRO Agent Ver. 4.6 Supporting Windows Server 2012 |
Download <MD5> |
| NEC ESMPRO Agent Ver. 4.6 Installation Guide (Windows) |
Download (PDF) |
Appendix
1.Monitoring of "Storage Spaces"
When you are using [Storage Spaces] that is supported by Windows Server 2012 and the capacity
consumption of the virtual disk is larger than the capacity consumption of the physical disks in the
storage pool, you will be able to detect that the disk capacity consumption is insufficient by
monitoring the following Event Log.
- [Source] Microsoft-Windows-StorageSpaces-Driver
- [Event ID] 103
- [Message] The capacity consumption of the storage pool %1 has exceeded the threshold limit set on
the pool. Return Code: %2
- Start [NEC ESMPRO Agent] from [Control Panel].
- Click the [Report Setting] button in the [NEC ESMPRO Agent Ver.4.6 Properties] window.
- Expand the "EventLog" tree on the left side of the [Alert Manager] window.
- Right-click on [Microsoft-Windows-StorageSpaces-Driver/Operational], select [Select Monitor Event].
- Select [Microsoft-Windows-StorageSpaces-Driver] on [Source].
- Select [103] from the [Event ID List] and click the [Add] button, ID is added to the [Monitor
Event].
- Click the [OK] button, the [Select Monitor Event] window is closed.
- Verify that the source and the event ID that you added are displayed under the "EventLog" tree.
- Right-click the event ID, select [Link Destination].
- Select destinations from the "Destination ID List" and click the [Add] button. Destinations are
added to the "Report To" list.
- Click the [OK] button, the [Link Destination] window is closed.
When the insufficient capacity consumption has been resolved, the following event is registered.
If there is a need for a report, please perform the above procedure by replacing the event ID with
[104].
- [Source] Microsoft-Windows-StorageSpaces-Driver
- [Event ID] 104
- [Message] The capacity consumption of the storage pool %1 is now below the threshold limit set on
the pool. Return Code: %2
2.Monitoring of "NIC Teaming"
When you are using [NIC Teaming] that is supported by Windows Server 2012, you will be able to detect
that the team member NIC is disconnected by monitoring the following Event Log.
- [Source] Microsoft-Windows-MsLbfoSysEvtProvider
- [Event ID] 16949
- [Message] Member Nic %2 Disconnected.
- Start [NEC ESMPRO Agent] from [Control Panel].
- Click the [Report Setting] button in the [NEC ESMPRO Agent Ver.4.6 Properties] window.
- Expand the "EventLog" tree on the left side of the [Alert Manager] window.
- Right-click on [System], select [Select Monitor Event].
- Select [Microsoft-Windows-MsLbfoSysEvtProvider] on [Source].
- Select [16949] from the [Event ID List] and click the [Add] button, ID is added to the [Monitor
Event].
- Click the [OK] button, the [Select Monitor Event] window is closed.
- Verify that the source and the event ID that you added are displayed under the "EventLog" tree.
- Right-click the event ID, select [Link Destination].
- Select destinations from the "Destination ID List" and click the [Add] button. Destinations are
added to the "Report To" list.
- Click the [OK] button, the [Link Destination] window is closed.
When the NIC is reconnected, the following event is registered.
If there is a need for a report, please perform the above procedure by replacing the event ID with
[16950].
- [Source] Microsoft-Windows-MsLbfoSysEvtProvider
- [Event ID] 16950
- [Message] Member Nic %2 Connected.
In addition, the test report of the event which is set to be monitored (Source:
Microsoft-Windows-MsLbfoSysEvtProvider) in the above procedure cannot be performed.
Top of this page
