NEC Express5800 Server Series
Microsoft® Windows Server® 2008 Support Kit
NEC Express5800/i120Ra-e1
Product code: N8100-1452F, -1453F
Windows Server 2008 Support Information |
The above NEC products become available for Microsoft® Windows Server® 2008 by
applying the NEC Express5800 Windows Server 2008 Support Kit, which is a generic name of the
module groups for supporting Windows Server 2008 and is delivered through this page.
About installing Windows Server 2008
The installation procedure is detailed in the Installation Guide downloadable from this
page.
Read carefully the guide and this page before installing the Support
Kit.
- Download necessary driver modules for installing Windows Server 2008 from the tables
below and expand them on CD-R or other media.
Refer to the Installation Guide or
Readme.txt included in each module for details on how to expand the modules.
- RAID drive configuration must be completed before Windows Server 2008 installation.
Refer to the User's Guide.
- Activation is required.
- Use the Support Kit for the Windows Server 2008 installation. NEC EXPRESSBUILDER
bundled with the i120Ra-e1 does not support Windows Server 2008 installation.
Notes for using Windows Server 2008 Operating System
- To keep the BIOS clock correctly, connect the i120Ra-e1 to an NTP server.
- Use NEC EXPRESSBUILDER bundled with the i120Ra-e1 to install the Express Report
Service.
- Mount the other hard disk drive than system disk after Windows OS installation, to use
multiple SATA hard disk drives without RAID configuration. The disk number is received
diskmgmt.msc.
- On-board RAID is not supported.
- When using N8103-116, N8103-117 or N8103-118, do not allow the state of hibernation and
standby to prevent the malfunction during Patrol Read, Rebuild, and Consistency Check.
Notes for using Windows Server 2008 Server Core
- AFT/ALB function is not supported.
- NEC ESMPRO Manager is not supported.
- To use NEC ESMPRO Agent on Server Core, go to Note
for NEC ESMPRO Agent.
- The Express Report Service module in the EXPRESSBUILDER bundled with the i120Ra-e1 is
not supported.
Notes for using Hyper-V
- Hyper-V operates only on the x64 architecture.
- Hyper-V beta version is out of guarantee by Microsoft corporation and NEC Corporation.
|
Top of this page
Windows Server 2008 Support Kit
[Download modules]
Module name |
Download |
Installation Guide |
Installation Guide |
Download (PDF 2.62 KB) |
Drivers for Windows Server 2008 |
NEC Express5800 Driver Kit |
Download |
Firmware |
N8190-127 Fibre Channel Controller |
Download |
N8190-131 Fibre Channel Controller (2ch) |
Download |
Utilities / Tools |
NEC ESMPRO Manager, Agent |
List |
Universal RAID Utility Ver. 1.31 |
Download |
Top of this page