================================================================================
NEC Express5800 Series
Starter Pack Version S8.10-004.03
================================================================================
<Name>            Starter Pack Version S8.10-004.03
<Model(s)>        Express5800/R120h-1M, R120h-2M, R120h-1E, R120h-2E, T120h
<Type>            Starter Pack
================================================================================


<Description>
 Starter Pack includes the customized drivers for Express5800 server, 
 applications, and instruction manuals. Please install Starter Pack before 
 using Express server.

   Starter Pack Version S8.10-004.03 : Supported Windows Server 2019 (R120h-1M, R120h-2M only)
                                       Supported the February, 2019 version of FW


Read carefully the following agreement before downloading.
If you do not agree to the terms of the agreement, do not download this software.
By downloading the software, you are bound by the terms of the agreement. 

<User License Agreement>
NEC Corporation ("NEC") grants you the right to use the software 
program ("Software") under the terms and conditions of this Agreement
only in the country where you acquired the Software. You shall agree to all 
provisions of this Agreement and assume responsibility for selection, 
installation, use and effect of the Software purchased for your desired effect.

1. Period
 1.1 This Agreement shall come into force on the day of the first download.
 1.2 You may terminate the license granted hereunder by notifying us in writing
     at least one month prior to the desired termination date.
 1.3 NEC may terminate the license granted you hereunder at any time if you
     fail to comply with any terms and conditions of this Agreement. 
 1.4 The license to the Software shall remain in force until the license is
     terminated on the date set forth hereunder. 
 1.5 Upon termination of the license, other rights granted you hereunder shall
     also be terminated. You must destroy, uninstall or dispose of the Software,
     any copies of the Software and other materials provided with the Software. 

2. Right of use
 2.1 You may use the Software only on the purchased products, the products
     which NEC defines as the supported models for the Software.
 2.2 NEC grants you the right to use the Software only in the country in which
     you acquired the Software in accordance with the conditions of the
     preceding paragraph.

3. Intellectual Property Rights including patent and copyright
  All of the intellectual property rights to the Software including patent
  and copyright belong to NEC and/or the owners of the copyright or any 
  other intellectual property rights to the Software. No Intellectual 
  Property Rights including patent and copyright to the Software shall be 
  transferred to you. The Intellectual Property Rights can be protected as
  a matter of Japan, U.S.A., and any other applicable laws and regulations.

4. Copying, altering, and combining of the Software
 4.1 You may only make one copy of the Software solely for a backup purpose,
     provided, however, that the copy of the Software is loaded into permanent
     memory of the system (such as a hard disk drive). You may store the Software
     solely to prevent damages or loss of the memory media.
 4.2 You shall place the copyright notice and other legends on each copy of the
     Software.
 4.3 You may not use, copy, alter, combine, publish, reproduce the Software 
     over the Internet, or otherwise dispose of the Software except as provided
     in this Agreement. 
 4.4 You may not copy, publish the manual and other related documentation
     provided with the Software, or reproduce such manual and documentation 
     over the Internet.
 4.5 No intangible property right to the Software shall be transferred to you.

5. Transfer
 You may not sublicense, assign, transfer, or otherwise dispose of the Software
 or the right of use to any third party except as provided herein.

6. Reverse compile
 You may not reverse engineer, decompile, or otherwise disassemble the Software.

7. Limitation of warranties
 7.1 THE SOFTWARE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. NEC 
     DISCLAIMS ALL WARRANTIES FOR THE SOFTWARE, EITHER EXPRESS OR IMPLIED, INCLUDING
     BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
     PURPOSE. FURTHER, NEC MAKES NO REPRESENTATION OR WARRANTY THAT THE USE OF ANY
     SOFTWARE WILL NOT INFRINGE ANY THIRD PARTY'S RIGHTS, INCLUDING BUT NOT LIMITED
     TO, ANY INTELLECTUAL PROPERTY RIGHTS. IN NO EVENT SHALL NEC BE HELD LIABLE WITH
     RESPECT TO ANY CLAIM BY YOU OR ANY THIRD PARTY ON ACCOUNT OF OR ARISING OUT OF
     THE USE OF THE SOFTWARE.

 7.2 Notwithstanding the provisions of the preceding paragraph, in case NEC
     makes any bug-fix version to the Software, NEC will, at its expense,
     furnish you with such bug-fix version, update version, or information in
     relation to such bug-fix or update version both in the source code form and
     object code form, and such bug-fix version or update version shall be
     considered as the licensed Software.

8. No liability 
 IN NO EVENT SHALL NEC BE LIABLE FOR ANY INDIRECT OR CONSEQUENTIAL DAMAGES OR
 LOSS OF PROFIT OR DAMAGES BASED ON ANY THIRD PARTY CLAIM, EVEN IF NEC HAS BEEN
 ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. 

9. Miscellaneous
 9.1 This Agreement shall be governed by the laws of the country in which you
     acquired the Software.
 9.2 You agree that NEC inspects the use of the Software and provides the information
     of the inspection to the owner of the copyright to the Software.
 9.3 If the Software is licensed for use in the performance of a U.S. Government prime
     contract or subcontract, You agree that, consistent with FAR 12.211 and 12.212,
     commercial computer Software, computer Software documentation and technical data
     for commercial items are licensed under this Agreement.
 9.4 If the Software has a file written about software license (hereinafter referred
     to as "License File"), the terms of License File are applied to the 
     files specified in License File, regardless of the above-mentioned Agreement.


================================================================================
Checking the version of EXPRESSBUILDER
================================================================================
Install the latest EXPRESSBUILDER according to the steps below.
The latest version changes the user interface and instructions.
For details, refer to Supplement of Installation Guide.

1. Run the EXPRESSBUILDER from POST (F10 key).
2. Proceed to the Home menu of EXPRESSBUILDER, and click "i" icon on the upper 
   right of the screen.
3. If the Application Version is 3.20.154, the EXPRESSBUILDER is the latest version,
   and you do not need to update the EXPRESSBUILDER.
   If "Application Version" is less than 3.20.154 or does not appear on the window,
   update the EXPRESSBUILDER
   E8.10-004.01 according to the following website.
      https://www.nec.com/express
      Related Links : Download - Documents & Software


================================================================================
Usage (Updating FW)
================================================================================
Follow the steps below to update the FW/SW included in this software.

  - Preparing: 
    1. Download files into any local folder on Windows environment.
    2. Run s8.10-004.03.bat to create the ZIP file.
    3. Extract the ZIP file created at step 2.
    4. Burn the extracted iso file onto DVD-R as an ISO image.
    5. Read the following supplements.
       -- Supplement of iLO FW updating
       -- Supplement of ESMPRO updating
       -- Supplement of EXPRESSCLUSTER/Windows Server Failover Clustering Environment
       -- Supplement of jumbo Packet Settings
       -- Supplement of using N8104-177/183/187 on Windows Server 2012R2, Windows Server 2016, and Windows Server 2019
       -- When using the N8103-196 RAID Controller with Disk Extension Unit,
          refer to "N8103-196 RAID Controller Firmware".
       -- When using the N8190-165/166/167/168, refer to Firmware Updating Tool (for Windows) or (for Linux)
       -- When using the N8190-163/164/171/172, refer to Firmware Updating Tool
          or Procedure.
          (for Windows). 
          (for RHEL6.x). 
          (for RHEL7.x). 
          (for ESXi6.0). 
          (for ESXi6.5). 
          (for ESXi6.7). 
  - On Windows:
    1. See Using offline mode to update the firmware.
    2. Sign in the Windows installed to the server with Administrators privilege.
    3. Set the Starter Pack DVD into the server.
    4. When the N8104-173/182/185 is installed to the server, run the \packages\cp037380.exe on the DVD. 
       After that, restart the server.
    5. Refer to "Standard Program Package Installation" in Installation Guide (Windows) to install Standard Program Package.
       If an error occurs, install Standard Program Package again.
    6. When the RAID Report Service is already installed, uninstall it in advance.
    7. Install the bundle software from "Applications" on the Starter Pack menu.
       For details, refer to the Installation Guide (Windows).

  - On the other OS:
    1. See Using offline mode to update the firmware.
    2. Refer to the following web site to check the latest VMware ESXi software.
       2-1. Agentless Management Service and iLO Channel Interface Driver
            https://www.nec.com/en/global/prod/express/
            Related Links : Download
                            - Documents & Software
                              - (Select your server model)
            -- Download the update file for iLO Firmware 1.38 or later.
       2-2. WBEM Provider and CLI tool
            https://www.nec.com/en/global/prod/express/
            Related Links : Download
                            - Utility

  - Using offline mode:
    1. Make sure that the setting of TPM Visibility is Hidden when Trusted Platform Module(TPM) is installed.
    2. Make a note of SNMPv3 alert settings by using iLO web interface when SNMPv3 alert is enabled.
    3. Refer to "Steps to update firmware by Starter Pack DVD" to update the FW.
    4. If you intend to update from iLO firmware 1.10/1.15 by this procedure, 
       reconfigure the SNMPv3 alert settings by using iLO web interface when SNMPv3 alert was enabled
       before updating iLO firmware.
    5. When you updated to iLO firmware by this procedure, the SMTP Secure Connection (SSL/TLS) of
       AlertMail settings in iLO web interface is set to be enabled.
       If you have enabled iLO AlertMail in previous iLO version, reconfigure AlertMail settings in 
       accordance with your environment.
    6. Restore the TPM settings of Step 1 if necessary.


================================================================================
Remark
================================================================================
Innovation Engine (IE) firmware and Server Platform Service (SPS) firmware
are not included in this Starter Pack. Please refer to the following website 
to check the latest firmware.

  https://www.nec.com/en/global/prod/express/
  Related Links : Download
                  - Documents & Software
                    - (Select your server model)


--------------------------------------------------------------------------------
<Revision History>
2019/02/18  1st edition: Uploaded the S8.10-004.03.
2020/03/05  2nd edition: Added "When using the N8190-163/164/171/172," in 
                         "Preparing".
2020/03/23  3rd edition: Added "When using the N8190-165/166/167/168," in 
                         "Preparing".


--------------------------------------------------------------------------------
<Copyright and Trademark>

All contents on this software are the copyright of NEC corporation or the third
party software developer.

 * Microsoft, Windows, Windows Server, and BitLocker are trademarks or 
   registered trademarks of Microsoft Corporation in the United States 
   and other countries.
 * All other product, brand, or trade names used in this document are 
   the trademarks or registered trademarks of their respective companies.

--------------------------------------------------------------------------------
   Copyright NEC Corporation 2019